ページ1に含まれる内容の要旨
CAUTION
This section of instruction manual is specially edited for serv-
ice manual with modified contents.
It is not recommended to use this section for the substitution
of the original instructions included in the merchandise.
COLOR VIDEO CAMERA
INSTRUCTIONS
KY-F58
For Customer Use:
Enter below the Serial No. which
are located on the bodys.
Retain this information for future
reference.
Model No. KY-F58
Serial No.
FREEZE
Digital
Memory
ページ2に含まれる内容の要旨
[U Ver.] CAUTION: CAUTION To prevent electric shocks and fire hazards, do NOT use RISK OF ELECTRIC SHOCK DO NOT OPEN other than specified power source. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). Information for USA NO USER SERVICEABLE PARTS INSIDE. This device complies with Part 15 of the FCC Rules. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Changes or modifications not approved by JVC could void The lightning flash with arrowhead symbol, the user's autho
ページ3に含まれる内容の要旨
Thank you for purchasing the JVC KY-F58 Color Video FEATURES Camera. • High quality 1/3” and 3CCD format camera • The camera head can be dismantled to produce a compact CONTENTS component. FEATURES .............................................................................. 3 • A built-in Frame Memory function enables a STROBE SYNC BASIC CONFIGURATION........................................................3 and RANDOM TRIGGER to operate the camera without add- ing any further equipment. 1. INT
ページ4に含まれる内容の要旨
1. INTRODUCTION PRECAUTIONS ON PROPER USE HANDLING PRECAUTIONS • When recording an important event, be sure to try the Storage camera first before using it in order to check that the cam- Avoid using or placing the unit in places; era operates properly. • subject to extreme heat or cold; • JVC does not guarantee the contents of a recording if the • with excessive dirt or dust; color video camera, VCR or video cassette malfunctions • with high humidity or moisture; during recording. • subject
ページ5に含まれる内容の要旨
2. CONTROLS, INDICATIONS AND CONNECTORS Camera Control [Panel side] 6 8 9 LOCK MENU ITEM+ DATA+ ON BARS RESET SET ITEM- DATA- 1 2 3 4 OFF 5 4 3 2 12 11 10 7 CAMERA CONTROL UNIT KY-F58 FILES FREEZE PULL OPEN MENU 1 2 3 4 13 SELECT MEMORY POWER 1 TO CAMERA WHITE PAINT VIDEO LEVEL SET FULL AUTO LEVEL ON RB OFF 14 PAINT 15 16 17 18 19 [POWER] power switch and its LED [SET] set button. 1 7 This is the ON/OFF power switch. When power is supplied To choose the item on the MENU screen, press thi
ページ6に含まれる内容の要旨
2. CONTROLS, INDICATIONS AND CONNECTORS (Cont’d) Camera Control [Panel side] (Cont’d) Set up switch [VIDEO LEVEL FULL AUTO] full auto button and its LED 12 18 This switch changes the FILE setting and the RANDOM This adjusts the video level automatically by varying iris, TRGGER setting. Change the setting according to the de- shutter speed and GAIN (electrical sensitization) automati- sired use. cally according to the brightness of an object. SW1, 2 FILE setting The LED light during Full/Auto
ページ7に含まれる内容の要旨
2. CONTROLS, INDICATIONS AND CONNECTORS (Cont’d) CAMERA CONTROL [Rear side] (Cont’d) 25 24 23 22 21 20 SEE INSTRUCTION MANUAL RS-232C EXT REF OUTPUT AC- INPUT VD HD/VBS VIDEO Y/C LENS EXT TRIGGER REMOTE FLASH WEN FREEZE RGB/COMPONENT SIGNAL EARTH 26 27 28 29 30 31 [Y/C] Y/C output signal connector (4 Pin) [RS-232C] Communication port (D-Sub 9Pin) 20 25 This connector outputs Y/C separated video signal. Connect to an RS-232C interface in a personal computer or other control unit. 4 3 Pin No
ページ8に含まれる内容の要旨
2. PARTS NAMES AND FUNCTIONS (Cont’d) CAMERA CONTROL [Rear side] (Cont’d) [FLASH] Flash signal output connector (BNC) 31 [FREEZE] freeze input connector 29 When the FREEZE item is set to the FLASH, a flash signal This is a trigger input signal connector from an external source. It connects with an external trigger unit such as foot switch, etc. is output from this connector according to FREEZE input. A negative electrode signal with a pulse width of 20µ sec. to It is recommended to be used when
ページ9に含まれる内容の要旨
3. CONNECTIONS BASIC SYSTEMS Mounting the optional lens (T14 X 5.5MD) to the camera head (See page 9.) male Lens Monitor Camera head (T14 x 5.5 MD) female To CCU KY-F58 COLOR VIDEO CAMERA To LENS How to mount the camera head (See page 10.) Connecting the camera [LENS REMOTE] head and CCU (See page 10.) Provided cable (5m) OUTPUT CAMERA CONTROL UNIT KY-F58 FILES FREEZE LENS REMOTE terminal PULL OPEN MENU 1 2 3 4 SELECT MEMORY on the rear panel Recommended Remote Controllers POWER T
ページ10に含まれる内容の要旨
3. CONNECTIONS (Cont’d) HOW TO MOUNT THE CAMERA HEAD Camera mounting bracket How To Mount The Bracket How To Mount The Camera The camera mounting bracket is not When this unit is mounted to a installed on the camera when it is fixed or a rotating table, fix it to shipped from the factory. the camera mounting screw Install it on the top or bottom of the hole located on the camera camera according to your require- mounting bracket. ments using the two provided cam- • To prevent dropping, when
ページ11に含まれる内容の要旨
3. CONNECTIONS (Cont’d) SYSTEM APPLICATION Camera head VD Microscope adapter HD/VBS HZ-M161/M162/M163 (Front panel) RS-232C EXT REF OUTPUT SEE INSTRUCTION MANUAL AC- INPUT VD HD/VBS VIDEO Y/C Microscope LENS EXT TRIGGER REMOTE FLASH WEN FREEZE RGB/COMPONENT Flash light LENS FLASH WEN FREEZE VIDEO REMOTE To 120V AC VD HD/VBS RGB WEN VIDEO IN Lens remote control Foot switch, etc. Monitor Image processing unit To start a flash light with a foot switch Note: • Connect an external trigger
ページ12に含まれる内容の要旨
4. BASIC ADJUSTMENTS BEFORE USE (Be sure) MONITOR ADJUSTMENT Perform the adjustments for color, contrast and luminance by RS-232C EXT REF OUTPUT SEE INSTRUCTION MANUAL AC- INPUT VD HD/VBS displaying the color bar signal built into the KY-F58 on the moni- VIDEO Y/C tor. LENS EXT TRIGGER REMOTE FLASH WEN FREEZE MONITOR RGB/COMPONENT 1. Connect a color video monitor to the VIDEO OUPUT termi- nal of the KY-F58. 2. Open the cover and switch the Lock switch to OFF. 3. Press the “ITEM+” button to
ページ13に含まれる内容の要旨
4. BASIC ADJUSTMENTS BEFORE USE (Cont’d) WHITE BALANCE ADJUSTMENT The color of light (color temperature) is different according to the color source. When the main light source lighting an object is changed, readjust the white balance as well. < How To Set > 4.5.6. 1. Open the cover and set the Lock Switch to OFF. 3.7. 5.6. 2. Select the “FILE” for the white balance to be adjusted by the 1. 2. 10. SELECT button. (The LED for the selected file lights.) LIGHT 3. Press the MENU button to display the
ページ14に含まれる内容の要旨
4. BASIC ADJUSTMENT BEFORE USE (Cont’d) WHITE SHADING ADJUSTMENT Green or magenta color appears on the top or bottom of the screen, this is because the white balance is adjusted at the center of the screen but not at the top or bottom of the screen. This is caused by the characteristics of a lens and to compensate it is called white shading compensation. 1.2. 3.4. 6. After performing the WHITE BALANCE ADJUSTMENT proce- dure 1. to 10., carry out the following settings. CAMERA CONTR
ページ15に含まれる内容の要旨
5. OPERATION FILE SETTING There are four scene files to be set by dip switch depending on the operating conditions. Scene File A including four sub files are all set to the standard shipment setting values. Change the settings according to the requirements. Scene File B, C and D should be set to required file settings before use such as Slit inspection, Microscope 1 , Microscope 2 , etc. Note: Before carry out operations below, make sure the LOCK switch is turned OFF. Scene File Setting Select
ページ16に含まれる内容の要旨
5. OPERATION (Cont’d) FILE SETTING (Cont’d) RESET Initial Values of Scene File A It returns the values set on the MENU screen to the initial Item Initial Values values. There are three different RESET items: Individual file reset, LENS TYPE AUTO All files reset, and Reset for the TOTAL SETTING only. IRIS CONTOROL AUTO SHUTTER NORMAL Note: LEVEL - - - - - - - - - - Do not perform any other operations during the resetting. GAIN 0 dB Otherwise, the values will not be initialized properly. LEVEL -
ページ17に含まれる内容の要旨
5. OPERATION (Cont’d) MANUAL OPERATION WHITE PAINT Manual White CAMERA CONTROL UNIT KY-F58 FILES FREEZE LOCK MENU ITEM+ DATA+ When the item for the WHITE BAL on the WHITE BALANCE 1 2 3 4 ON BARS SET ITEM- DATA- 1 2 3 4 RESET SELECT MEMORY screen is set to MANUAL, the red and blue color levels can be OFF POWER adjusted. TO CAMERA WHITE PAINT VIDEO LEVEL SET FULL AUTO LEVEL ON • Turning the PAINT (R) adjust knob to the right will increase the RB OFF red and turning it to the left will d
ページ18に含まれる内容の要旨
6. SETTING ON THE MENU SCREEN MENU OPERATION Note: To register the setting values which are changed on the MENU screen to the FILE, select the FILE with the set up SW and the SELECT button before displaying the MENU screen. Also, make sure to turn off the power before switching the set up SW. 1.7. 2. 3.5. 6. 1. Set the LOCK switch to OFF. LOCK MENU ITEM+ DATA+ ON 2. Press the MENU button to display the MENU screen. BARS RESET SET ITEM- DATA- 1 2 3 4 OFF 3. Move the cursor to the
ページ19に含まれる内容の要旨
6. SETTING ON THE MENU SCREEN (Cont’d) VIDEO LEVEL SCREEN Item Functions and operation Variables values LENS TYPE Switch over between AUTO and MANUAL according to the lens to be used. AUTO AUTO MANUAL : Set it when an automatic iris lens is used. MANUAL : Set it when a manual iris lens is used or no lens is used. IRIS Switch over between AUTO and MANUAL for iris setting when a automatic iris lens is used. AUTO CONTROL AUTO MANUAL : Iris can be adjusted automatically. MANUAL : Iris can be adjuste
ページ20に含まれる内容の要旨
6. SETTING ON THE MENU SCREEN (Cont’d) VIDEO LEVEL SCREEN (Cont’d) Item Function and operation Variable values DETECT It sets the detection area with the AUTO IRIS mode. Change this according to the NORMAL AREA condition of use. CIRCLE Detecting SQUARE area RECTANGLE FULL Detecting Detecting area area NORMAL CIRCLE SQUARE Detecting Detecting area area RECTANGLE FULL WHITE BALANCE SCREEN Item Function and operation Variable values COLOR TEMP The basic color temperature of the white balance c
