ページ1に含まれる内容の要旨
Owner’s manual
Mode d’emploi
Manual de instrucciones
AM/FM CD PLAYER WITH DVD/CD/MD CHANGER
CONTROL
•
RADIO AM/FM-LECTEUR CD AVEC COMMANDE DE CHANGEUR
DVD/CD/MD
•
RADIO-REPRODUCTOR AM/FM DE DISCOS COMPACTOS CON
CONTROL DE CAMBIADOR DE DVD/DISCOS COMPACTOS/
MINIDISCOS
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2002: Clarion Co., Ltd.
PE-2523B
Printed in China / Imprimé en Chine / Impreso en China
2002/3 (D·C) 280-7779-00
ページ2に含まれる内容の要旨
Thank you for purchasing this Clarion product. Please read this owner’s manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This manual includes the operating procedures of the CD changer, MD changer, AUX, DAB, DSP DVD, PHONE MUTE and TV tuner connected via the CeNET cable. The CD changer, MD changer and TV tuner ha
ページ3に含まれる内容の要旨
Motorized Face 2. PRECAUTIONS When the Sirius Satellite What is Sirius Satellite Radio? This unit uses motorized face to make large- 2. Before the MOTORIZED FACE closes, there screen displays possible. may be a sound from the safety mechanism. 1. When the inside of the car is very cold and the Sirius is radio the way it was meant to be: Up to 2. Driving on extremely bumpy roads which cause Radio is connected This is normal. player is used soon after switching on the 100 new channels of digital
ページ4に含まれる内容の要旨
Motorized Face 2. PRECAUTIONS When the Sirius Satellite What is Sirius Satellite Radio? This unit uses motorized face to make large- 2. Before the MOTORIZED FACE closes, there screen displays possible. may be a sound from the safety mechanism. 1. When the inside of the car is very cold and the Sirius is radio the way it was meant to be: Up to 2. Driving on extremely bumpy roads which cause Radio is connected This is normal. player is used soon after switching on the 100 new channels of digital
ページ5に含まれる内容の要旨
Major button operations when external equipment is 3.CONTROLS / LES COMMANDES / CONTROLES 4. NOMENCLATURE connected to this unit Note: [SC] button Source unit / Appareil pilote / Unidad fuente When the CD/MD/DVD changer • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). • Performs preset scan while in the radio mode. is connected When the button is pressed and held, auto Names of the Buttons and their Functions For details, see the section
ページ6に含まれる内容の要旨
Major button operations when external equipment is 3.CONTROLS / LES COMMANDES / CONTROLES 4. NOMENCLATURE connected to this unit Note: [SC] button Source unit / Appareil pilote / Unidad fuente When the CD/MD/DVD changer • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). • Performs preset scan while in the radio mode. is connected When the button is pressed and held, auto Names of the Buttons and their Functions For details, see the section
ページ7に含まれる内容の要旨
Major button operations when external equipment is 3.CONTROLS / LES COMMANDES / CONTROLES 4. NOMENCLATURE connected to this unit Note: [SC] button Source unit / Appareil pilote / Unidad fuente When the CD/MD/DVD changer • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). • Performs preset scan while in the radio mode. is connected When the button is pressed and held, auto Names of the Buttons and their Functions For details, see the section
ページ8に含まれる内容の要旨
Motorized Face 2. PRECAUTIONS When the Sirius Satellite What is Sirius Satellite Radio? This unit uses motorized face to make large- 2. Before the MOTORIZED FACE closes, there screen displays possible. may be a sound from the safety mechanism. 1. When the inside of the car is very cold and the Sirius is radio the way it was meant to be: Up to 2. Driving on extremely bumpy roads which cause Radio is connected This is normal. player is used soon after switching on the 100 new channels of digital
ページ9に含まれる内容の要旨
English Display Items Clock (Clock indication) etc. (Audio mode, FADER, BALANCE, etc. indications) Operation status indication Titles, PS names, PTYs, Clock, etc. are displays. Preset channel indication (1 to 6) Disc number indication (1 to 12) SIRIUS indication Stereo indication Loudness indication Function mode indication : BEQ indication • The names of modes being selected, (BEQ:Beat EQ) etc. are displayed. : Professional mode indication : DAB indication : VSE indication ✻A Digital Rad
ページ10に含まれる内容の要旨
English 5. REMOTE CONTROL Receiver for remote control unit Operating range: 30˚ in all directions Signal transmitter Remote control unit [ ] FUNC [ ] [ ],[ ] [ ],[ ] [ ] BAND [ ] ISR [MUTE] [DISP] [ ] [SCN] RDM [ ] RPT Inserting the Batteries 1.Turn the remote control unit over, then slide the rear cover in the direction of the arrow. AA (SUM-3, IECR-6/1.5V) Batteries 2.Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit facing in the d
ページ11に含まれる内容の要旨
English Functions of Remote Control Unit Buttons Mode CD/MD changer Radio (DAB) CD TV DVD changer Button Switches among radio, DAB, CD, DVD deck, CD/MD changer, DVD changer, TV, and [FUNC] AUX. Plays the first track. Moves the next disc [BAND] Switches reception Switches reception Top play. in increasing order. band. band. Increases and decreases volume (in all modes). [ ] , [ ] [ ] , [ ] Moves preset Moves tracks up and down. Moves preset channels up and When pressed and
ページ12に含まれる内容の要旨
English 6. DCP The control panel can be detached to prevent Attaching the DCP theft. When detaching the control panel, store it 1. Insert the DCP so that the A section on the in the DCP (DETACHABLE CONTROL PANEL) right side of the DCP catches on the hook B case to prevent scratches. on the unit. We recommend taking the DCP with you when leaving the car. Removing the DCP 1. With the MOTORIZED FACE closed, turn off the power. 2. Press the [RELEASE] button to open the DCP. [ ] RELEASE button 2. Pre
ページ13に含まれる内容の要旨
English 7. OPERATIONS Note:Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “3. CONTROLS” on page 5 (unfold). Adjusting the volume CAUTION 1. Press the front part of the knob to adjust. The Be sure to lower the volume before switch- knob will pop up. ing off the unit power or the ignition key. The 2. Turning the [ROTARY] knob clockwise in- unit remembers its last volume setting. If you creases the volume; turning it counterclock- switch the power off with
ページ14に含まれる内容の要旨
English Basic Operations Setting the Beat EQ Adjusting the non fader output This unit are provided with 5 types of sound tone ef- volume fects stored in memory. Select the one you prefer. You can adjust the volume output from the unit’s * The factory default setting is “USER CUSTOM”. non fader output terminal. Each time you press the [BEQ] button, the tone 1. Press the [A] button and select “NON-FAD effect changes in the following order: VOL”. “BASS BOOST” “IMPACT” “EXCITE” 2. Turning the
ページ15に含まれる内容の要旨
English Basic Operations MID F : 700Hz/1KHz/2KHz (The fac- Adjusting the Beat EQ tory default setting is “1k”) 1. Press the [BEQ] button and select the Beat MID Q : 1.5/2 (The factory default set- EQ mode (1 to 3) to adjust. ting is “2”) 2. Press the [A] button and select “BASS 4. When the adfustment is complete, press the BOOST or IMPACT or EXCITE”. [A] button several times until the function 3. Turning the [ROTARY] knob clockwise ad- mode is reached. justs in the + direction; turning it counte
ページ16に含まれる内容の要旨
English Radio Operations FM reception Seek tuning ® For enhanced FM performance the 1. Press the [BND] button and select the de- tuner includes signal actuated stereo control, sired band (FM or AM). Enhanced Multi AGC, Impulse noise reduction * If “MANU” is lit in the display, press and hold curcuits and Multipath noise reduction circuits. the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tun- ing is now available. Changing the reception area 2. Press the [a] or [
ページ17に含まれる内容の要旨
English Radio Operations CD Operations Manual memory Loading a CD 1. Select the desired station with seek tuning, 1. Press the [Q] button. The MOTORIZED manual tuning or preset tuning. FACE opens. 2. Press and hold one of the [DIRECT] buttons CAUTION for 2 seconds or longer to store the current Be careful not to get your fingers caught station into preset memory. when opening and closing the MOTORIZED Auto store FACE. Auto store is a function for storing up to 6 sta- 2. Insert a CD into the cent
ページ18に含まれる内容の要旨
English CD Operations Scan play Ejecting a CD The scan play locates and plays the first 10 sec- 1. Press the [Q] button. The MOTORIZED onds of each track on a disc automatically. This FACE opens and a CD ejects. “EJECT” ap- function continues on the disc until it is cancelled. pears in the display. * The scan play is useful when you want to select a CAUTION desired track. 1. Press the [SC] button to start scan play. “SCN” Be careful not to get your fingers caught lights in the display. when open
ページ19に含まれる内容の要旨
English Operations Common to Each Mode Entering titles 5. Press and hold the [ ] button for 2 sec- onds or longer to clear the title and cancel Titles up to 10 characters long can be stored in title input mode. memory and displayed for CD, CD changer and TV stations. The number of titles that can be en- tered for each mode are as follows. Turning the external output Mode Number of titles adjustment display on/off CD mode 50 titles When not using the external output, you can turn off the “NON-FAD
ページ20に含まれる内容の要旨
English Operations Common to Each Mode Adjusting the display contrast You can adjust the display contrast to match the angle of installation of the unit. * The factory default setting is “8”. (Adjustment level: 1 to 18) 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select “CON- TRAST”. 3. Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust the contrast. 4. Press the [T] button to return to the
