ページ1に含まれる内容の要旨
EON15 G2 User Guide
Part Number: 981-00059-01
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Contents Package Contents .....................................................................................................................4 Agency Approvals and Certifications ......................................................................................4 Before You Begin - Important Information .............................................................................4 Mounting / Suspending EON Speakers.............................................................................
ページ4に含まれる内容の要旨
Welcome Welcome to the family of discerning sound equipment users who have selected JBL Professional loudspeakers. EON is a creation of JBL, the world leader in sound reinforcement. JBL sound systems are used in some of the world’s most famous arenas, concert halls and clubs. In fact, JBL speakers are the premier choice for today’s hottest touring acts and artists. You just can’t make a more professional choice. This User Guide contains important information that will help you get the most from
ページ5に含まれる内容の要旨
Keep the exterior of the speaker enclosure clean. Use a damp rag with a general-purpose household detergent. For grease and marking tape residue, use a damp cloth with isopropyl alcohol or mineral spirits and wipe dry. Do not use powerful solvents like acetone, MEK, lacquer thinner or 1,1,1-Trichloro-ethane (household cleaning fluid). These solvents will damage painted and co-polymer surfaces of your speakers. EON speakers are not intended for fixed installation in outdoor environments. Mois
ページ6に含まれる内容の要旨
Balanced loop-through / mix output. “Daisy-chain” additional EON speakers or send the mixed output to a mixing console. 90º x 60º (nominal) constant directivity horn. Thermomaster® Total Thermal Management System®. A single piece, cast-aluminum baffle integrates the woofer frame, horn, and amplifier heat-sink. Air movement in the finned ports dissipates heat - no internal or external cooling fans are required. Rugged, light-weight, black co-polymer enclosure with cast aluminum baffle.
ページ7に含まれる内容の要旨
Available Accessories SS2-BK Tripod Stand ESK15 Suspension Kit for EON 15” models BRK15 Bracket, adapts EON 15” models to OmniMount® brackets EON15 BAG/W-1 Zippered, plush-lined speaker bag with wheels EON15 BAG-1 Zippered, plush-lined speaker bag EON BRK1 Mounting bracket for EON 15” speakers - fixed angleWOICKSTART QUICKSTART 1. Refer to the “Basic Sound Reinforcement System with Stage Monitors” diagram on page 10. 2. Turn the INPUT 1, 2, and 3 controls fully counter-clockwise. 3. Set the MIC
ページ8に含まれる内容の要旨
CONTROLS AND CONNECTIONS The audio section of the EON15 G2 includes powerful features that enhance the flexibility of your EON15 G2 speakers. MIX LOOP O Connectors U T INPUT 1 P This balanced input accepts a standard XLR (female) connector. U A broad range of signals (-44 dBu to +20 dBu nominal) from T microphones, audio mixing consoles, and electronic musical instruments may be connected here. When using a single audio input I N to the speaker, this is the input to use. The sensitivity of thi
ページ9に含まれる内容の要旨
MIX/LOOP This switch selects the source of the signal for the OUT connector. CAUTION: Before adjusting this switch, be certain to set the input level control of any equipment connected to this output to its minimum gain (least sensitive) setting. In the disengaged position, only the signal from the INPUT 1 connector is routed directly to the OUT connector. Changing the other settings on the audio panel will not effect the OUT signal. The INPUT 2 and INPUT 3 inputs will not be present at the
ページ10に含まれる内容の要旨
Indicators PEAK The PEAK LED (Light Emitting Diode) illuminates to indicate that the system is approaching clipping. The threshold for this light is actually about 2 dB below clipping. An occasional flickering of this light on the loudest peaks is acceptable. If this LED is on for more than the duration of brief dynamic peaks, the system is being overdriven. Continuously over-driving the system will result in unpleasant and fatiguing distortion and may lead to premature failure of your speake
ページ11に含まれる内容の要旨
APPLICATION EXAMPLES Basic Sound Reinforcement System with Stage Monitors This is the basic live sound system. The optional tripod stands will get the speakers up above the audience so the sound can project. The second pair of EON15P G2 speakers are used as stage monitors. For maximum gain before feedback, position the monitors so that they do not point into microphones. INPUT 1 INPUT 1 Monitor or Line Out Aux. Out Left & Right Mixer Loop / Mix switch in "Loop" Position OUT INPUT 1 INPUT 1 Th
ページ12に含まれる内容の要旨
Vocal / Acoustic-Electric Guitar Here’s a simple set-up for a musician using an acoustic-electric guitar with a stereo pick-up and backing tracks to accompany live vocal performance. If stereo is not a requirement, simply omit the 2nd speaker Loop/Mix Switch in "Loop" Position OUT INPUT 1 INPUT 1 Microphone INPUT 2 INPUT 2 INPUT 3 INPUT 3 Acoustic-Electric Guitar with Stereo Output RCA (shown) or 1/8" (mini-phone) jack Tape or CD Health Club Instruction For a simple to use system just add a h
ページ13に含まれる内容の要旨
DJ or Sound Reinforcement System with EON PowerSubs Here’s a system with EON PowerSubs added to provide additional low-frequency power. If your mixer has a SUM or MONO output, you can also drive the EON Powersubs from this output and use the volume control for the mono for bass mix effects. LOOP/MIX LOOP/MIX SWITCH IN SWITCH IN LOOP POSITION LOOP POSITION INPUT 1 INPUT 1 LOOP/MIX LOOP/MIX OUT OUT Output Output Left Right Mixer INPUT INPUT 13
ページ14に含まれる内容の要旨
DJ System with Passive Subwoofers This system combines a pair of EON15 G2 powered speakers with externally powered subwoofers for extra power at very low frequencies. Note that many, but not all DJ mixers use RCA (phono) outputs as illustrated. Your DJ mixer may use another type of connector. INPUT 1 INPUT 1 DJ Mixer Output - Right Output - Left High Pass Output High Pass Output Right Left dbx® DriveRack™ PA* Low Pass Output - Left Low Pass Output - Right Amplifier * Recomended crossover frequ
ページ15に含まれる内容の要旨
TROUBLESHOOTING Symptom Likely Cause What to do No sound Speaker not connected to active Verify that speaker is connected AC power and that the circuit is on Power not switched on Switch on power and verify that power LED is on No sound, speaker is connected Speaker power cable is faulty or Re-seat the power cable at to working AC power but won’t improperly connected. both ends. come on. Substitute a known-good power cable Blown fuse There are no user-serviceable fuses in the EON15 G2. Ta
ページ16に含まれる内容の要旨
Noise or hiss heard at output Noisy source device Disconnect the devices that are connected to your speaker one at a time. If the noise goes away, the problem is with the source or the connecting cable. Hum or Buzz that increases or Improper A/C ground or faulty Disconnect or mute channels one decreases when the mixer level equipment connected to mixer at a time to isolate the problem. controls are moved. input Refer to the owner’s manual of the faulty equipment for troubleshooting help. Faulty
ページ17に含まれる内容の要旨
REFERENCE Connections - Balanced and Unbalanced There are two basic types of audio system interconnections for audio signals: Balanced and Unbalanced. Your EON15 G2 can accept either type of input. Balanced Lines In audio, a balanced line is a three-conductor system in which the two signal wires carry an equal, but opposite voltage with respect to the ground wire. The ground wire acts only as a shield and does not carry any audio signal current. Outside interference (such as RFI - Radio Frequenc
ページ18に含まれる内容の要旨
Cables and Connectors XLR/F to XLR/M Microphone Cable The standard cable for interconnection of microphone and line level signal in professional audio systems. Microphone to mixer Microphone to EON15 G2 INPUT 1 Professional audio mixer to EON15 G2 INPUT 1 “Daisy chaining” EON15 G2 speaker systems TRS (Balanced) 1/4” Phone to XLR/M For connecting balanced devices with 1/4” connector to EON XLR input. TRS (Unbalanced) 1/4” Phone to XLR/M For connection of instruments with unbalanced output
ページ19に含まれる内容の要旨
Loudspeaker Placement and Mounting The following guidelines will help you achieve optimum sound wherever you use your EON loudspeakers: Raise the speakers as high as possible. For best results try to get the high frequency horn at least 2 to 4 feet above the heads of the audience. If the speakers are too low, the people in the back of the audience will not receive the best quality sound. Place the speakers between the microphones and the audience. Feedback occurs when the microphones pick up s
ページ20に含まれる内容の要旨
JBL WARRANTY AND CONTACTS Who Is Protected by This Warranty? Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product has been purchased in the Continental United States, Hawaii or Alaska. (This Warranty does not apply to JBL products purchased elsewhere except for purchases by military outlets. Other purchasers should contact the local JBL distributor for warranty information.); and B.) The original dated bill of sale is presented whenever warran
