ページ1に含まれる内容の要旨
Important Safety
Instructions
，
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric to perso
ページ2に含まれる内容の要旨
Important Safety Instructions NOTES 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a damp cloth. 7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defe
ページ3に含まれる内容の要旨
Important Safety Instructions Warning Failure to avoid the following potentially hazardous situations may result in injury or property damage. The unit is designed to provide you with route suggestions. It does not reflect road closures or road conditions, traffic congestion, weather conditions, or other factors that may affect safety or timing while driving. Use the unit only as a navigational aid. Do not attempt to use the unit for any purpose requiring precise measurement of dire
ページ4に含まれる内容の要旨
Important Safety Instructions Note: This equipment has been tested and found to comply with limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, whi
ページ5に含まれる内容の要旨
Accessories Accessories List ITEM NAME QTY Instruction Manual 2 AC Adaptor 1 Car Adaptor 1 Mounting Bracket 1 Mounting Cradle 1 USB Cable 1 Stylus 1 Dashboard Mount Disk 1 SD Card 1 Pouch 1 NOTE Accessories and their parts numbers are subject to modification without prior notice due to improvements. 5
ページ6に含まれる内容の要旨
Contents …………………………………..………..1 Important Safety Instructions ……………………………….…………...5 Accessories ……………………………….…………...7 View of Main Unit ……………………………….……….…..8 System Connections Power Supply Preparation …………………………….……….….….10 General Setup ……………………………….…………..12 Playing Music …………………………….……………..17 Photo Viewer ……………………………….…………..19 ……………………………….…………..22 Use of the Mount Accessories ……………………………….…………..23 Troubles
ページ7に含まれる内容の要旨
View of Main Unit 1. POWER Button Press for a longer time to enter or exit the standby mode. 2. Card Slot Insert the SD card into the slot. 3. Earphone Jack Used to connect earphones for private listening. When the earphones are connected to this jack, the speaker will be turned off automatically. 4. DC 5V Input Jack Used to connect to the supplied adaptor. 5. LCD Screen 6. USB Port Used to connect to the USB device. 7. RESET Button Press to r
ページ8に含まれる内容の要旨
System Connections Always ensure that the unit and any other external device connected to the unit are switched off and unplugged from the power supply before you attempt to connect the unit to any external device. Connecting to PC The unit is designed with a USB port which allows you to connect the unit to a PC for map updating. See the figure below for details: System requirements: -Windows 98SE, ME, 2000 and XP (Driver required for Windows 98SE
ページ9に含まれる内容の要旨
System Connections Inserting SD Card The unit is designed with an SD Card Slot which allows you to insert an SD card into the unit as shown below: To remove the card, gently press the card in with your fingernail. The card unlocks and protrudes slightly. You can now remove the card. Connecting to Earphones Connect the earphones to the right side of the unit for private listening. When earphone is connected, the speakers will automatically turn off. Note: Overly loud
ページ10に含まれる内容の要旨
Power Supply Preparation Using the AC Adaptor The unit is supplied with an AC adaptor for powering and charging its battery. 1. Connect AC adaptor to the right side of the unit in the jack marked DC 5V IN, as shown on the right. 2. Plug the two-prong end of the power cord into a grounded electrical outlet. Note: Turn unit's power off before unplugging. When using the adaptor, the LCD screen will be brighter than with the rechargeable battery. Using th
ページ11に含まれる内容の要旨
Power Supply Preparation Working conditions and precautions for the rechargeable battery Battery should only be used and charged when temperatures are between 32 °-100 °F. Maintain well-ventilated conditions around the product to avoid overheating. Don’t put the product on a bed, sofa or anything that may block ventilation to the product. When the battery is weak, an indication menu will appear on the LCD screen and the unit will power off automatically after a while. Ch
ページ12に含まれる内容の要旨
General Setup System Main Menu When in navigator, tap Exit button of the Navigation Menu in simple mode or in advanced mode to exit the application. A confirmation message appears: Are you sure you want exit the program? Tap Exit and the system main menu appears. In the main menu, there are four items for selecting. Touch the corresponding item to enter. Tap to enter the Navigator. Tap to enter the Music Player. Tap to enter the Photo Viewer. Tap to enter
ページ13に含まれる内容の要旨
General Setup Setup Menu In the main menu, tap to enter the Setup menu, the screen will display as below: In the Setup menu, tap to return to the main menu. Language Tap in the Setup menu to enter Language setting menu for language selecting, as shown below: Tap the , buttons to select language. Then tap to confirm or tap to cancel. 13
ページ14に含まれる内容の要旨
General Setup Date & Time Tap in the Setup menu to enter Date & Time setting menu for changing to the current time zone, date and time, as shown below: Tap the buttons to select the proper Time Zone. Tap the buttons of Date group to change the corresponding date. Tap the buttons of Time group to change the corresponding time. Then tap to confirm or tap to cancel. Brightness Tap in the Setup menu to enter Brightness setting menu for backlight adjusting, as shown
ページ15に含まれる内容の要旨
General Setup Volume Tap in the Setup menu to enter Volume settings menu for volume adjusting, as shown below: Tap the to decrease the volume. Tap the to increase the volume. Then tap to confirm or tap to cancel. Align Screen Tap in the Setup menu to align the screen, as shown below. Tap the center of the cross with your finger. When the cross moves to another position, tap and hold the center of the new target. Repeat each time to complete the calibration proce
ページ16に含まれる内容の要旨
General Setup Power Tap in the Setup menu to enter Power menu, as shown below: The Power menu displays the unit’s battery status. The values are between 0% and 100%, where 0% means the battery power has run out completely, and 100% represents a full battery power. When the battery is being charged, the Battery Status will be “Charging”. 16
ページ17に含まれる内容の要旨
Playing Music The unit is designed with an SD card slot and supports MP3 and WMA format files playback. To use the music player, you will need to have an SD card with your MP3 music files preloaded. Please note that you cannot use the navigation function of the device at the same time you are using the music player. Remove the mapping software SD card that comes with the device from the SD card slot on the side of the unit. Then insert your SD card with your MP3 or WMA music file
ページ18に含まれる内容の要旨
Playing Music Tap button to enter the music play list menu, as shown below: When you open the play list, the system will look for audio files on its SD memory card and create a play list automatically. If the play list consists of more than one screen, tap the up arrow for the previous page and the down arrow for the next page. Tap / toggle buttons to determine whether the player will repeat the songs in the play list or not. / toggle buttons to determine whether or not to
ページ19に含まれる内容の要旨
Photo Viewer The unit is designed with an SD card slot and supports JPEG format files playback. To use the Photo Viewer, you will need to have an SD card with your JPEG picture files preloaded. Please note that you cannot use the navigation function of the device at the same time you are using the Photo Viewer. Remove the mapping software SD card that comes with the device from the SD card slot on the side of the unit. Then insert your SD card with your JPEG picture files. Note:
ページ20に含まれる内容の要旨
Photo Viewer In the folder menu, double tap the memory card icon, and the photos stored in the memory card will be listed on the screen. In the photo list, double tap a photo to play it on the LCD screen. You can also tap a photo to select it and then tap to play it. Tap to return to the previous menu. Tap to enter the Setting menu for setting the Slide Show, as shown below. You can set the slide show on or off to determine whether or not to play photos in slide mode. W
