ページ1に含まれる内容の要旨
Quick Instillation Guide
1600EP Series UPS
Purpose
This Quick Installation Guide (QIG) provides the minimum information needed to connect and startup your 1600EP UPS. The
complete 1600EP Users Manual and supporting documentation are provided in the accompanying CD (P/N 62350). The self-
starting CD requires a PC with a web browser (e.g Microsoft Explorer) and a PDF file viewer (e.g. Adobe Acrobat Reader).
If requested, a printed manual may be provided at no cost from Toshiba International Cor
ページ2に含まれる内容の要旨
Inspection/Unpacking Inspection Upon receipt of the UPS, an inspection for shipping damage should be performed. Use caution when removing the unit from the pallet. Refer to labels or documentation attached to packing material. Unpacking Check the unit for loose, broken, bent or otherwise damaged parts. If damage has occurred during shipping, keep all original crating and packing materials for return to the shipping agent. The warranty does not apply to damage incurred during shipping. Ensure
ページ3に含まれる内容の要旨
4. Access panels should be removed only by Toshiba Field Service personnel. 5. Turn the power on only after installing ALL of the covers. 6. If the UPS should emit smoke, produce an unusual odor, or make sound, turn the power off immediately. When operating in the inverter mode, placing the breaker in the OFF position will switch the UPS to the battery backup mode. The output of the UPS will continue uninterrupted to the load. The unit must be in the bypass mode at the time that the breaker is
ページ4に含まれる内容の要旨
Wire Size and Tightening Torque Use the following table to select the recommended wire size and terminal lug tightening torque for I/O wire connections. Tightening Terminal AWG AWG AWG AWG AWG AWG AWG Item Torque Number 3.6-RoHS kVA 3.6 kVA 6 kVA 8 kVA 10 kVA 14-18 kVA 22 kVA lb.-in. (N•m) AC Input Lines 1 and 2 12 (8) 12 (8) 14.2 (1.56) 10 (8) 8 (1/0) 6 (1/0) 4 (1/0) 1 (1/0) AC Output Lines 4
