ページ1に含まれる内容の要旨
OPERATOR’S MANUAL
4 v LITHIUM-ION ScREwdRIvER
REvERSIBLE
HP41L
Your screwdriver has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
wARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
SAvE THIS MANUAL FOR FUTURE REFERENcE
ページ2に含まれる内容の要旨
TABLE OF cONTENTS Introduction ..................................................................................................................................................................... Warranty .......................................................................................................................................................................... General Safety Rules ...........................................................................................
ページ3に含まれる内容の要旨
GENERAL SAFETy RULES Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety wARNING! shoes, hard hat, or hearing protection used for appropriate Read all instructions. Failure to follow all instructions conditions will reduce personal injuries. listed below may result in electric shock, fire and/or Avoid accidental starting. Ensure the switch is in the serious injury. The term “power tool” in all of the warnings off-position before plug
ページ4に含まれる内容の要旨
GENERAL SAFETy RULES Use the power tool, accessories and tool bits etc., in connection from one terminal to another. Shorting the accordance with these instructions and in the manner battery terminals together may cause burns or a fire. intended for the particular type of power tool, taking Under abusive conditions, liquid may be ejected from into account the working conditions and the work the battery, avoid contact. If contact accidentally to be performed. Use of the power tool for
ページ5に含まれる内容の要旨
SAFETy RULES FOR cHARGER An extension cord should not be used unless absolutely necessary. Use of improper extension cord wARNING! could result in a risk of fire and electric shock. If extension REAd ANd UNd ERSTANd ALL INSTRUc TIONS. cord must be used, make sure: Failure to follow all instructions listed below, may result in a. That pins on plug of extension cord are the same electric shock, fire and/or serious personal injury. number, size and shape as those of plug on charger. Be
ページ6に含まれる内容の要旨
SyMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SyMBOL NAME dESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current n o No Load Speed Rotational speed, at no load Class II Tool Double-
ページ7に含まれる内容の要旨
SyMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SyMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will result dANGER: in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could result wARNING: in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, may result in cAUTION: minor or moderate injury. (W
ページ8に含まれる内容の要旨
FEATURES PROdUcT SPEcIFIcATIONS Torque ..................................................................... 45 in. lb Motor ........................................................................4 V DC Collet ........................................SPEEDLOAD +™ SYSTEM Switch ...........................................Single Speed/Reversible Charger Input.....................................10 V , AC only, 60 Hz No Load Speed ........................................180 r/min. (RPM) Charge Rat
ページ9に含まれる内容の要旨
FEATURES kNOw yOUR ScREwdRIvER LEd wORkLIGHT SeeFigure 1. The screwdriver has a built-in LED worklight that illumi- nates when the switch trigger is depressed. This feature is The safe use of this product requires an understanding of convenient when working in close or tight areas where the information on the tool and in this operator’s manual as additional light is needed. well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all
ページ10に含まれる内容の要旨
OPERATION wARNING: INPUT Do not allow familiarity with products to make you JACK careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. RED wARNING: CHARGE LIGHT Always wear safety goggles or safety glasses with side shields when operating products. Failure to do so could CHARGER PLUG result in objects being thrown into your eyes, resulting in possible serious injury. wARNING: Do not use any attachments or accessories not CHARGER recommended by t
ページ11に含まれる内容の要旨
OPERATION AdJUSTING TORQUE REVERSE See Figure 3. There are twelve torque indicator settings located on the front of the screwdriver. Rotate adjustment ring to desired setting, aligning num- ber on adjustment ring with arrow on housing. • 1 - For driving small screws • 3 - 4 For driving screws into soft material • 5 - 7 For driving screws into soft and hard materials • 8 - 9 For driving screws into hard wood FORWARD • 10 - 11 For driving large screws • For full power application
ページ12に含まれる内容の要旨
MAINTENANcE wARNING: wARNING: When servicing, use only identical replacement parts. Do not at any time let brake fluids, gasoline, petroleum- Use of any other parts may create a hazard or cause based products, penetrating oils, etc., come in contact product damage. with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury. wARNING: Only the parts shown on the parts list are intended to be Always wear safety goggles or safety glasses wit
ページ13に含まれる内容の要旨
MAINTENANcE BATTERy PAck REMOvAL ANd PREPARATION SCREW(S) FOR REcycLING See Figure 7. MOTOR Remove the four screws securing motor housing cover, HOUSING then remove cover. Lift batteries from motor housing enough to expose leads and battery terminals. Disconnect the red lead from the battery by pulling apart as shown. Disconnect the black lead from the battery by pulling apart as shown. NOTE: Be careful not to break battery leads when disconnecting them. Remove the battery fo
ページ14に含まれる内容の要旨
OPERATOR’S MANUAL 4 v LITHIUM-ION ScREwdRIvER REvERSIBLE HP41L wARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depe
