ページ1に含まれる内容の要旨
USER’S GUIDE
IP-011
Before printing read this guide.
ページ2に含まれる内容の要旨
Thank you very much for your purchase of the IP-011. This Guide deals with making prints, correct handling of the machine, and precaution for safety. Please read before printing. In order to maintain a satisfactory printing performance, please keep this Guide readily available for reference.
ページ3に含まれる内容の要旨
Introduction Make sure to read before use Thank you very much for purchasing the "Konica Printer Controller IP-011." Konica Corp. ("Konica") allows you to use the software attached to the IP-011 only when you agree to its "Software License Agreement." If you do not agree to terms of this agreement, return the software to the distributor from which you purchased it prior to use. Software License Agreement Carefully read all terms and conditions of the agreement which will be shown during the soft
ページ4に含まれる内容の要旨
Introduction n Contents n Contents .............................................................................................................................. ii n Introduction .........................................................................................................................v n About Supplied Items ..........................................................................................................v n About Positioning of This Manual ...........................
ページ5に含まれる内容の要旨
Introduction n Printer Driver Function List .............................................................................................. 3-5 n Description of Printer Driver Functions (in the alphabetic order) ..................................... 3-8 l Alphabetic Order ................................................................................................................... 3-8 Driver Function Combination List ...........................................................................
ページ6に含まれる内容の要旨
Introduction Appendix A Troubleshooting .................................................... Appendix A-1 n Error Message ................................................................................................. Appendix A-2 n Basic Troubleshooting ...................................................................................... Appendix A-3 n General Problems of Printing ........................................................................... Appendix A-3 l The “OHT Film” is
ページ7に含まれる内容の要旨
Introduction n Introduction The IP-011 Printer Controller works as an interface between the Konica 7020 series Copier and a workstation, and enables direct printing from a workstation environment. The printer engine on the printer side and the optional network board include operating manuals (7020 series operating manual/KN-304 operating manual (CD)) respectively. For the detailed operations of Windows95/98 and Windows NT, refer to operating manuals of each operating system. For operations of ap
ページ8に含まれる内容の要旨
Introduction l A part or all of this operating manual shall not be used or copied without permission. l Konica shall have no liability for any influences caused by using the 7020 series copier +IP-011 system and this manual. l Information written in this operating manual is subject to change without notice. l Konica Corp. shall have the copyright of this printer driver. l This printer driver shall not be copied except for the purpose of backup. l A part or all of this operating manual shall not
ページ9に含まれる内容の要旨
Introduction n About Positioning of This Manual This manual describes how to operate the Printer Controller Konica IP-011 when the Konica 7020 series copier is used as a printer by connecting it to computers or your network. An optional network board (KN-304) is required so as to use the Konica 7020 series copier as a printer by connecting it to your network. Refer to the "7020 series operating manual" and the "KN-304 operating manual" which are attached to the Printer Engine (7020 series) on t
ページ10に含まれる内容の要旨
Introduction n System Requirements l Windows The following are required to print from the Windows*-compliant computers to the Printer Controller. • Computers on which Windows 95/98, WindowsNT 4.0 can run • CD-ROM drive (necessary to install the user software) In case of using Windows 95/98 • Microsoft Windows 95/98 • 32MB RAM or more In case of using Windows NT 4.0 • Microsoft Windows NT 4.0 and NT Service Pack 3 • 32MB RAM or more Parallel Port The following are required to print to the Printe
ページ11に含まれる内容の要旨
Introduction n Rules in This Manual • Notation of a name of each section in this manual It is written within [ ] (round brackets). (e.g. [Chapter 1: Outline ]) • Notation of names shown on the screen They are written within [ ](braces). (e.g. Click the [OK] button.) • Notation of cautions In this manual, important items to be paid attention to are written with marks. Each mark used in this manual has the following meaning. Precautions and limits at the time of operating hardware or software a
ページ12に含まれる内容の要旨
Chapter 1 Outline Chapter 1 Outline n Contents of This Chapter ............................................................ 1-2 n Outline of the Printer Controller .................................................. 1-3 l IP-011 and Printer Engine ........................................................................... 1-3 l IP-011 Hardware Configuration ................................................................... 1-4 l I/O Interface .....................................................
ページ13に含まれる内容の要旨
Chapter 1 Outline n Contents of This Chapter This chapter describes the outline of the Konica IP-011 Printer Controller. For the Copier, Konica 7020 series to which the Konica IP-011 Printer Controller is attached, refer to the operating manual of the Copier. 1-2 IP-011 Printer Controller
ページ14に含まれる内容の要旨
Chapter 1 Outline n Outline of the Printer Controller l IP-011 and Printer Engine The Konica IP-011 is the Printer Controller (IP-011) which is used to connect the Copier, Konica 7020 series (Konica 7020 series) to computers or a network and to use the Konica 7020 series as a printer from applications on Windows 95/98 or Windows NT (In order to connect to a network, the optional Konica KN-304 network board is required.). When the command for printing is executed from applications on Windows 95/9
ページ15に含まれる内容の要旨
Chapter 1 Outline l IP-011 Hardware Configuration Basic Configuration Configuration of the IP-011 is as follows: Control board CPU: Power PC 401 GF Program memory: FLASH ROM System memory: 16MB SD-RAM Memory The IP-011 is equipped with 16 MB memory as standard and can be expanded to 80 MB at the maximum. l I/O Interface Parallel Centronics (IEEE1284)/ amphenol 36 pin male connector PCI Bus Card Edge Type/20MHz/32bit Ethernet (option) 100Base-T and 10Base-T The optional KN-304 card is used to con
ページ16に含まれる内容の要旨
Chapter 1 Outline l Data Flow Computer Printer Tools Application Browser Status Monitor Control Panel HTML Printer Driver Spooler Interface IEEE1284 Network IEEE1284 Network (TCP/IP,IPX/SPX) (TCP/IP,IPX/SPX) NIC Printer Controller IEEE1284 Intermediate Language Interpreter Memory IP-011 Command for Printing Engine Status Image Data Printer Engine PCI Bus E-RDH Memory Engine IP-011 Printer Controller 1-5
ページ17に含まれる内容の要旨
Chapter 1 Outline l How to Use Memory Most of memory of the IP-011 is used for rasterizing images and a part of it is used for the system operation. In addition, E-RDH memory of the Konica 7020 series is used for print processing. The basic memory settings of the IP-011 is 16MB, which allows 1 bit mode (600 dpi) printing for all sizes of paper. The memory of the IP-011 can be expanded to 80MB at the maximum. In addition, the E-RDH memory of the Konica 7020 can be expanded to 288MB at the maximum
ページ18に含まれる内容の要旨
Chapter 1 Outline l General View The IP-011 is mounted to the Konica 7020 series. The following is the general view. IP-011 Parallel Port The IP-011 is attached to the back side of the Konica 7020 series. Konica 7020 IP-011 Printer Controller 1-7
ページ19に含まれる内容の要旨
Chapter 1 Outline n About the Printer Tools l About the Printer Tools When you install printer driver with “setup.exe” held in the CD-ROM to the computer connected to the system of Konica 7020 series and IP-011, you can select simultaneous installation of the Printer Tools. The Printer Tools is the generic name of two programs, “Status Monitor” and “Control Panel.” The Printer Tools enable you to monitor the printer status from computers and to perform printer settings. Refer to “5 Status Monito
ページ20に含まれる内容の要旨
Chapter 1 Outline n About the Printer Driver l Compliant OS The printer driver can be used on the following OS. Windows 95 Windows 98 Windows NT 4.0 Windows 2000 (to be supported) Refer to “2 Setup” (2-1 page) for how to install the printer driver. Refer to “3 Printer Driver” (3-1 page) for detailed functions of the printer driver. IP-011 Printer Controller 1-9
