ページ1に含まれる内容の要旨
Bubble Master
Operator’s Manual
www.ultratecfx.com
VER. 30.10.10
ページ2に含まれる内容の要旨
Table of Contents Warning ...................................................................................... 3 Safety Precautions ..................................................................... 3 Technical Specifications ............................................................. 4 Technical Drawings ................................................................... 4 Operating Procedure ................................................................. 5 Shut Down Procedure ........
ページ3に含まれる内容の要旨
Warning Important Safety Instructions: 1. Do not remove the outer case. 2. Ensure that this unit is grounded at all times. Failure to do so may result in serious injury. 3. Use Ultratec Special Effects fluid ONLY. Safety Precautions 1. Ensure that any operation of the machine is supervised by suitably trained and authorized personnel. 2. Do not modify the machine or use a machine which has been damaged in any way. 3. Allow sufficient air circulation around the machine at all times. 4. Protect t
ページ4に含まれる内容の要旨
Technical Specifications Model: Bubble Master Part Number: CLB 2012 / 120 volt CLB 2015 / 120 volt w/ FDS Option CLB 2014 / 220-240 volt Length: 28.4in 72.1cm *Dimensions include Bubble Projector Width: 16.3in 41.4cm Height: 15.8in 40.1cm Net Weight: 21lbs 9.51kg Power Rating: 120 Volt A.C. 50/60 Hz. 1 Amps. 240 Volt A.C. 50/60 Hz. 0.5 Amps. Fluid: Water Base Bubble Fluid (Use only Ultratec Fluid) Technical Drawings www.ultratecfx.com 4
ページ5に含まれる内容の要旨
Operating Procedure Unpack the Bubble Master and inspect all components. Although the packaging was designed for the rigours of today’s parcel delivery services, damage may have occurred during shipping. 1. Prior to operation, the extension sleeve may be placed over the bubble outlet. This will allow the bubbles to be projected higher, before they begin to disperse outwards. 2. For lower flying bubbles do not use the extension sleeve. Pour fluid in bubble outlet 3. Place the Bubble Master on
ページ6に含まれる内容の要旨
Maintenance Fluid Reservoir When storing the Bubble Master for any extended period, be sure to thoroughly rinse the fluid reservoir. Bubble Wheel When storing the Bubble Master for any extended period, be sure to thoroughly rinse bubble wheels. Recommended Fluid Bubble Master Bubble Fluid: This Premium Quality Bubble Fluid produces large quantities of bubbles that are drier and longer lasting. Bubble Fluid Supreme: This Supreme Quality Bubble Fluid produces large quantities of Bubbles that ar
ページ7に含まれる内容の要旨
Warranty Warranty: All warranty is for one year parts and labour unless specified or manufacturer defect only. Abuse or Poor Maintenance will not be covered under warranty. Ultratec Special Effects Fluids must always be used. Use of any non Ultratec Special Effects Fluids will void all warranties. Accept no substitutions as there are no exceptions to this rule. Proof of Purchase or Proof of Sale must always accompany any warranty returns. An RA (return authorization) number must be noted on
