ページ1に含まれる内容の要旨
Multi-Protocol Print Server
NC-5100h
Network User's Guide
Please read this manual thoroughly before using the printer. You can print or view
this manual from the CD-ROM at any time, please keep the CD-ROM in a
convenient place for quick and easy reference at all times.
The Brother Solutions Center (http://solutions.brother.com) is your one stop
resource for all your printer needs. Download the latest drivers and utilities for your
printers, read the FAQs and troubleshooting tips or learn ab
ページ2に含まれる内容の要旨
Trademarks Brother is a registered trademark of Brother Industries, Ltd. HP, HP/UX, JetDirect and JetAdmin are trademarks of Hewlett-Packard Company. DEC, DEC server, VMS, LAT, and ULTRIX are trademarks of Digital Equipment Corporation. UNIX is a trademarks of UNIX Systems Laboratories. Ethernet is trademark of Xerox Corporation. Postscript is trademark of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc. Apple, Macintosh, LaserWriter, and AppleTalk are trademarks of Apple Comp
ページ3に含まれる内容の要旨
IMPORTANT NOTE:For technical and operational assistance, you must call. Calls must be made from within that country. In USA 1-800-276-7746 In Canada 1-877-BROTHER (514) 685-6464 (In Montreal) If you have any comments or suggestions, please write to us at: In Europe European Technical Services 1 Tame Street Audenshaw Manchester, M34 5JE UK In USA Printer Customer Support Brother International Corporation 15 Musick Irvine CA 92618 In Canada Brother International Corporation (Canada), Ltd. - Ma
ページ4に含まれる内容の要旨
IMPORTANT INFORMATION: REGULATIONS Federal Communications Commission (FCC) Declaration of Conformity (For U.S.A. only) Responsible Party: Brother International Corporation 100 Somerset Corporate Boulevard Bridgewater, NJ 08807-0911, USA TEL: (908) 704-1700 declares, that the products Product Name: Brother Network Card (BR-net) Model Number: NC-5100h complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
ページ5に含まれる内容の要旨
Declaration of Conformity (Europe) We, Brother Industries, Ltd., 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan declare that this product is in conformity with the following normative documents. Safety: EN 60950, EMC: EN 55022 Class B, EN 55024 following the provisions of the Low Voltage Directive 73/23/EEC and the Electromagnetic Compatibility Directive 89/336/EEC (as amended by 91/ 263/EEC and 92/31/EEC). Issued by: Brother Industries, Ltd. Information & Document Company Intel Copyr
ページ6に含まれる内容の要旨
Table of Contents 1 Unix Printing ......................................................................... 1-1 Printing from Unix/Linux using TCP/IP ............................. 1-1 Overview..................................................................... 1-1 TCP/IP........................................................................ 1-2 General TCP/IP UNIX Host Configuration.................. 1-2 Linux Configuration..................................................... 1-6 Linux Configu
ページ7に含まれる内容の要旨
Other Sources of Information....................................2-13 3 Peer to Peer Printing ............................................................3-1 ® How to Print in a Windows 95/98/Me Peer to Peer network ........................................................3-1 Overview.....................................................................3-1 Quick Tips:..............................................................3-1 Driver Deployment Wizard......................................3-2
ページ8に含まれる内容の要旨
Using BRAdmin to Configure the Print Server............ 5-4 Brother Internet Print Using a Web Browser to configure the Print Server... 5-5 Brother Internet Print Using TELNET to Configure the Print Server............. 5-6 Brother Internet Print Installing the BIP software on ® Windows 95/98/Me/NT4.0/2000/XP.......................... 5-7 Setup from CD-ROM .............................................. 5-7 Adding a Second Brother Internet Port..................... 5-10 ® Windows 2000/XP IPP P
ページ9に含まれる内容の要旨
Other Sources of Information....................................6-22 7 AppleTalk (EtherTalk) TCP/IP Printing................................7-1 Printing From a Macintosh................................................7-1 Overview.....................................................................7-1 Macintosh Configuration (OS 8.5 - 9.2) ......................7-2 How to Select the Print Server (AppleTalk/EtherTalk).................................................7-3 How to Select the Print Ser
ページ10に含まれる内容の要旨
Using DHCP to Configure the IP address ................ 10-5 Using APIPA to Configure the IP Address................ 10-5 Using ARP to Configure the Print Server IP Address .................................................... 10-6 Using RARP to Configure the IP Address ................ 10-8 Using BOOTP to Configure the IP Address.............. 10-9 Configuring the IP Address with BRCONFIG ......... 10-10 Changing the IP Address settings with the TELNET Console..................................
ページ11に含まれる内容の要旨
Reloading the Print Server Firmware............................... A-4 General...................................................................... A-4 Reloading firmware using BRAdmin.......................... A-5 Reloading process..................................................... A-6 Reloading using the FTP Protocol from a command prompt ....................................................................... A-7 Reloading using the FTP Protocol from a Web Browser . A-8 INDEX..............
ページ12に含まれる内容の要旨
1Unix Printing 1 Printing from Unix/Linux using TCP/IP Overview Brother print servers are supplied with the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol suite. Since virtually all UNIX host computers support TCP/IP, this capability allows a printer to be shared on a UNIX Ethernet network. As with all protocols, TCP/IP communications can proceed concurrently while other protocols are active, this means that UNIX, NetWare, Apple, and other computers can share the same Br
ページ13に含まれる内容の要旨
5 When configuring the PRINTCAP file, pay particular attention to the service names, BINARY_P1 and TEXT_P1. TCP/IP Brother print servers appear to the network as a UNIX host computer with a unique IP address running the lpd (line printer daemon) protocol. As a result, any host computer that supports the Berkeley remote LPR command can spool jobs to Brother print servers without the need for any special software on the host computer. For special applications, raw TCP ports are also availabl
ページ14に含まれる内容の要旨
The actual format of the entry may vary depending on your system, check your system documentation and also note the format of other entries in the /etc/hosts file. The node name in this file does not necessarily need to be the same as the one that is actually configured into the Brother print server (the name that appears on the printer configuration page), however, it is good practice to make the names the same. Some operating systems, such as HP/UX, do not accept the "_" character in th
ページ15に含まれる内容の要旨
3 Configure the /etc/printcap file on each host computer to specify the local print queue, the print server name (also called remote machine or rm), and the print server service name (also called remote printer, remote queue, or rp), and the spool directory. This step applies to the majority of UNIX systems, including Linux, Sun OS (but not Solaris 2.xx), Silicon Graphics (lpr/lpd option required), DEC ULTRIX, DEC OSF/1, and Digital UNIX. SCO UNIX users should follow these steps, but shou
ページ16に含まれる内容の要旨
The rm and rp options are not available on some UNIX systems, so if necessary check your documentation to determine the equivalent options. Users of Berkeley-compatible UNIX systems can use the lpc command to obtain the printer status: %lpc status laser1: queuing is enabled printing is enabled no entries no daemon present Users of AT&T-compatible UNIX systems can generally use the lpstat or rlpstat commands to obtain similar status information. Because this procedure varies from system to
ページ17に含まれる内容の要旨
Linux Configuration If you do not wish to use the command line interface to configure your Linux distribution, you may wish to use the Linux Printer System Manager application on your GUI. To do this, do the following: 1 From the Linux Printer System Manager screen, click the Add button. 2 You will now be asked to specify which Printer type you are using, select the Remote Unix (lpd) Queue option and click OK. 3 You must now specify the remote host name, remote queue name and the input fil
ページ18に含まれる内容の要旨
HP/UX Configuration In the case of HP/UX10.xx, the sam program is used to set up the remote printer. The steps are as follows: 1 Execute the sam program. From the list of options, select Printers and Plotters. 2 Select LP Spooler. 3 Select Printers and Plotters. 4 Select Actions and then Add Remote Printer/Plotter. 5 Enter any name as the Printer Name (this will be the name of the print queue). 6 Enter the IP address of the print server as the Remote System Name. 7 Enter the desired print se
ページ19に含まれる内容の要旨
Earlier versions of HP/UX use similar procedures to 10.xx users: 1 Enter sam and select Peripheral Devices and then Add Remote Printer (not Networked printer). 2 Enter the following remote printer settings (the other settings do not matter): ■ Line printer name (user-selectable). ■ Remote system name (the print server name; must match what is in hosts file or use print server IP address). ■ Remote printer queue (Print server binary or text service name, e.g. BINARY_P1 or TEXT_P1). ■ Remote
ページ20に含まれる内容の要旨
The procedure for pre-V4.0 systems is as follows. 1 Enter smit and select devices. 2 Select printer/plotter. 3 Select manage remote printer subsystem. 4 Select client services. 5 Select remote printer queues. 6 Select add a remote queue. 7 Enter the following remote queue settings: ■ Name of queue to add (user selectable). ■ Activate the queue (Yes). ■ Destination host (print server name; must match name in / etc/hosts file or use the print server IP address) ■ Name of queue on remote printer (p
