ページ1に含まれる内容の要旨
January 2003 • E-142
TECHNICAL DATA / COLOR PAPER
KODAK PROFESSIONAL
ULTRA III Paper
FEATURES BENEFITS
—NOTICE—
Excellent latent-image Improved processing
KODAK PROFESSIONAL ULTRA ENDURA Paper replaces
keeping from 1 minute to consistency in the lab
KODAK PROFESSIONAL ULTRA III Paper. ULTRA ENDURA
24 hours
Paper also provides an alternative to KODAK PROFESSIONAL
Optimized spectral Better alignment between
Digital III Color Paper
sensitivity paper, film dyes, video
analyzer, and pr
ページ2に含まれる内容の要旨
4. Then judge the color balance. You can use the KODAK DARKROOM RECOMMENDATIONS Color Print Viewing Filter Kit, KODAK Publication Handle this paper in total darkness. Be sure that your No. R-25, to evaluate your test print. The kit contains darkroom is lighttight. Eliminate stray light from enlarger 18 color-print viewing filters and instructions to help heads, timers, LEDs, etc. you determine filter adjustments for the white-light Note: Using a safelight will affect your results. If abso
ページ3に含まれる内容の要旨
6. Adjust the exposure for the new filter pack. An exposure Tricolor Exposure Method time that produced a print of satisfactory density may Use KODAK WRATTEN Gelatin Filters No. 25 (red), not produce an acceptable density when you change the No. 99 (green), and No. 47B (blue) to give the paper three filter pack. The following table gives filter factors for separate exposures. Do not move the paper or the enlarger calculating exposure adjustments when you use until you have made all three
ページ4に含まれる内容の要旨
LATENT-IMAGE KEEPING RETOUCHING This paper features improvements in the stability of the If possible, do any required retouching on color negatives latent image. Under normal conditions, you should not before you make prints—especially if you plan to make more notice shifts in the latent image with keeping times from than one print from each negative. For information on 1 minute to 24 hours. Therefore, you do not need to change retouching negatives, see KODAK Publication No. E-71, your print
ページ5に含まれる内容の要旨
SIZES AVAILABLE Rolls Rolls Surface Spec No. CAT No. in. x ft cm x m KODAK PROFESSIONAL ULTRA III Paper is available in a variety of roll and sheet sizes. 5 x 577 12.7 x 176 F 224 171 5507 Sizes and catalog numbers may differ from country to 8 x 577 20.3 x 176 F 224 193 9537 country. See your dealer who supplies KODAK 8 x 577 20.3 x 176 N 224 811 1478 PROFESSIONAL Products. 10 x 288 25.4 x 88 F 224 815 6493 10 x 288 25.4 x 88 N 224 820 0230 Size Size Sheets Per Surface CAT No. 11 x 288 27.9
ページ6に含まれる内容の要旨
CURVES Spectral-Dye-Density Curves Characteristic Curves 4.0 2.5 Process: RA-4 Exposure: 0.5 sec Process: RA-4, 95°F(35°C) 45 sec Densitometry: Status A 2.0 3.0 B G R 1.5 Cyan 2.0 Yellow Magenta 1.0 1.0 0.5 0.0 0.0 400 500 600 700 3.0 2.0 1.0 0.0 1.0 F002_0341AC F002_0967AC WAVELENGTH (nm) LOG EXPOSURE (lux-seconds) Spectral-Sensitivity Curves 2.0 Effective Exposure: 0.5 sec Process: RA-4 Yellow- 1.0 Forming Layer Magenta- 0.0 Forming Layer 1.0 Cyan- Forming Layer 2.0 250 300 350 400 450 500 550
ページ7に含まれる内容の要旨
MORE INFORMATION For the latest version of technical support publications for Kodak has many publications to assist you with information KODAK PROFESSIONAL Products, visit Kodak on-line at: http://www.kodak.com/go/professional on Kodak products, equipment, and materials. Additional information is available on the Kodak website If you have questions about KODAK PROFESSIONAL Products, call Kodak. and through the U.S.A./Canada faxback system. The following publications are available from deale
ページ8に含まれる内容の要旨
KODAK PROFESSIONAL ULTRA III Paper KODAK PROFESSIONAL ULTRA III Paper Kodak, Kodak Professional, Ektachrome, Ektacolor, Minor Revision 1-03 KODAK Publication No. E-142 Gold, Supra, Ultra, Vericolor, and Wratten are trademarks. Printed in U.S.A. CAT 170 6118
