Hitachi 50SBX78Bの取扱説明書

デバイスHitachi 50SBX78Bの取扱説明書

デバイス: Hitachi 50SBX78B
カテゴリ: プロジェクションテレビ
メーカー: Hitachi
サイズ: 20.67 MB
追加した日付: 6/4/2013
ページ数: 99
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスHitachi 50SBX78Bの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Hitachi 50SBX78Bに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Hitachi 50SBX78Bをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Hitachi 50SBX78Bのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Hitachi 50SBX78Bの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Hitachi 50SBX78B 取扱説明書 - Online PDF
Advertisement
« Page 1 of 99 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Hitachi 50SBX78Bを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Hitachi 50SBX78Bの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

SERVICE MANUAL
CONTENTS
SAFETY PRECAUTIONS .............................................
.3
SERVICING PRECAUTIONS ........................................... .6
TECHNICAL CAUTIONS .............................................. 10
SPECIFICATIONS ................................................... 11
CIRCUIT PROTECTION .............................................. 11
GENERAL INFORMATION ............................................ 12
CUSTOMIZED PICTURE AND SOUND ADJUSTMENTS .............

ページ2に含まれる内容の要旨

SAFETY NOTICE USE ISOLATION TRANSFORMER WHEN SERVICING Components having special safety characteristics are identified by anon the schematics and on the parts list in this service manual and its supplements and bulletins. Before servicing this chassis, it is important that the service technician read and follow the “Safety Precautions” and the “Product Safety Notices” in this Service Manual. For continued X-Radiation protection, replace picture tube with original type or Hitachi approved eq

ページ3に含まれる内容の要旨

SAFETY PRECAUTIONS Before returning an instrument to the customer, always make a safety check of the entire instrument, including but not limited to the following items. (READING a. Be sure that no built-in protective devices are LEAKAGE SHOULD NOT defective and/or have been deleted during servicing. CURRENT BE ABOVE 0.5mA) (1) Protective shields are provided on this chassis to TESTER DEVICE protect both the technician and the customer. Correctly replace all missing protective shield

ページ4に含まれる内容の要旨

- TUBE: The primary source of X- h. X-radiation Shield - X-radiation radiation in this receiver is the picture tube. The tube 1. This receiver is provided with X-ray shield plates for protection against X-radiation. Do not remove utilized for the above mentioned function in this chassis is specially constructed to limit X-radiation X-ray shield plates A, B, C, or D shown in Fig. 1 emissions. unnecessarily, when troubleshooting and/or making test measurements. For continued X-radiation pr

ページ5に含まれる内容の要旨

2. Read and comply with all caution and safety-related Components, parts, and/or wiring that appear to have overheated or are otherwise damaged should be notes on or inside the receiver cabinet, on the receiver chassis, or on the picture tube. replaced with components, parts, or wiring that meet original specifications. Additionally, determine the cause of overheating and/or damage and, if Design Alteration Warning - Do not alter or add to necessary, take corrective action to remove any 3

ページ6に含まれる内容の要旨

SERVICING PRECAUTIONS CAUTION: Before servicing instruments covered by this 7. Do not apply AC power to this instrument and/or any of its service data and its supplements and addenda, read and electrical assemblies unless all solid-state device heat- follow the SAFETY PRECAUTIONS on page 3 of this sinks are correctly installed. publication. NOTE: If unforeseen circumstances create conflict between 8. Always connect the test instrument ground lead to the the following servicing precautions

ページ7に含まれる内容の要旨

General Soldering Guidelines 2. Draw away the melted solder with an anti-static suction- 1. Use a grounded-tip, low-wattage soldering iron and type solder removal device (or with solder braid) before appropriate tip size and shape that will maintain tip removing the IC. temperature within the range 500°F to 600°F. Replacement 2. Use an appropriate gauge of resin-core solder composed 1. Carefully insert the replacement IC in the circuit board. of 60 parts tin/40 parts lead. 2. Carefully be

ページ8に含まれる内容の要旨

At Other Connections Fuses and Conventional Resistor Removal/Replacement 1. Clip each fuse or resistor lead at top of circuit board Use the following technique to repair defective copper pattern at connections other than IC Pins. This technique hollow stake. involves the installation of a jumper wire on the component side of the circuit board. 2. Securely crimp leads of replacement component around stake l/8 inch from top. 3. Solder the connections. CAUTION: Maintain original spacing b

ページ9に含まれる内容の要旨

NOTE: These components are affixed with glue. Be careful not to break or damage any foil under the component or at the pins of the ICs when removing. Usually applying heat to the component for a short time while twisting with tweezers will break the component loose. How to Replace Flat-IC Leadless Chip Components -Required Tools- (surface mount) Chip components must be replaced with identical * Soldering iron l iron wire or small awl chips due to critical foil track spacing. There are no

ページ10に含まれる内容の要旨

TECHNICAL CAUTIONS High Voltage limiter circuit operation check. 4. When the limiter circuit is operating properly, High 1. Turn off TV and connect jig as shown in Figure 2. Adjust Voltage will be less than 36.5 kV at 0.6mA when TV shuts jig fully counter-clockwise for minimum resistance. down. 2. Set the AC input to 12OV AC and turn on TV. 5. Turn off set immediately after checking circuit operation. 3. Confirm test pattern on CRT is a usable picture, then 6. Unplug set for one minute to

ページ11に含まれる内容の要旨

SPECIFICATIONS 50SBX78B Audio Input: Model: 470 mVrms, 47 k Ohm 6OSBX78B Stereo Audio Output: 470 mVrms, 1 k Ohm Cathode-Ray Tube: R=Pi GLFTOORFA Audio Output Power: G=PlGLFTOOHLA Front: 15 Watts per channel at 10% distortion, 8 Ohm impedence. B=Pi GLFTOOBMB Max. output - 18 Watts. Rear: 7.5 Watts per channel at 10% distortion, 8 Ohm impedence. 120 volts AC, 60 Hz Max output - 10 Watts. Power Input: Center: 7.5 Watts per channel at 10% distortion, 8 Ohm impedence. Power Consumption

ページ12に含まれる内容の要旨

GENERAL INFORMATION TV/Video TV/Video Source Source Selector Selector a&c Focus Fig. 3. Control Panel Rear Speaker _ S-Video Terminals-, Inputs Antenna Variable Transmitter Inputs Inputs/Outputs 1 and 2 Audio Output output Fig. 4. Rear Connections Panel 12

ページ13に含まれる内容の要旨

CUSTOMIZED PICTURE AND SOUND ADJUSTMENTS Select VIDEO to adjust picture settings and improve picture quality. CURSOR CURSOR CONTRAST 4-I, 75% CONTRAST 4-b 98% BRIGHTNESS 4-I) 50% BRIGHTNESS 4-I) 50% COLOR 4I1,50% COLOR 4-I) 50% TINT TINT 4---I 4---I SHARPNESS 4-I, 50% SHARPNESS 4-I, 50% RESET RESET Cl 0 ADVANCED ADVANCED SETTINGS MENU IT0 MENU BAR TO QUIT 1 EXIT I”““““’ Use the CURSOR A or v buttons to highlight the function to be adjusted. Press the CURSOR 4 or b buttons to adju

ページ14に含まれる内容の要旨

Select AUDIO SETTINGS to adjust the TV to your preference and to improve the sound quality. I I I CURSOR BASS BASS 4”,72% 4”,90% TREBLE TREBLE 4-I) 50% I 4-I, xw” BALANCE BALANCE 4-b--‘- 4---I RESET RESET 0 0 ADVANCED ADVANCED I I SETTINGS Ill MENU IT0 MENU BAR TO QUIT 1 EXIT Use CURSOR A or v to highlight the function to be adjusted. Press CURSOR 4 or b to adjust the function. Press EXIT to quit menu. NOTE: If BASS is selected you are adjusting BASS. The additional menu ite

ページ15に含まれる内容の要旨

TV GUIDE PLUS+ This feature allows you to view program information for up to 1 week in the future. It also allows you to control your cable box and VCR with your TV. jSetUD1 TV GUIDE Plus+ Options Menu MENU LANGUAGE CURSOR PLUG & PLAY What would you like to do? SIGNAL SOURCE CURSOR I./ Setup TV GUIDE Plus+ AUTO CHANNEL SET TV GUIDE Plus+ Channel Edito! CHANNEL MEMORY View TV GUIDE Plus+ Demo - CHANNEL LIST Exit CLOCK SET MAGIC FOCUS GUIDE PLUS+ + Press up/down to choose. T

ページ16に含まれる内容の要旨

SET UP TV GUIDE Plus+ Before you can use TV GUIDE Plus+ you must perform the setup. Simply use your illuminated remote control to enter the information provided here. Screens very similar to those you will see as you perform each step are shown here. I STEP 1 TV GUIDE Plus+ Options Menu 1. From the Hitachi on screen display menu, enter the SETUP-GUIDE Plus+ menu. What would you like to do? I./ Setup TV GUIDE Plus+ 2. Use the CURSOR buttons to select Setup TV GUIDE TV GUIDE Plus+ Cha

ページ17に含まれる内容の要旨

SET UP TV GUIDE Plus+ STEP 4 1. Use the CURSOR button to select YES or NO, then press SELECT. Do you have cable? jJ Yes I 2. If you select YES, you will go to step 5. If you select NO, you will go to NO step 9. Press “pidown lo choose. Then. press Select. STEP 5 TV GUIDE Plus+ Setup 1. Use the CURSOR buttons to SELECT YES or NO, then press SELECT. 2. If you select YES, you will go to step 6. If you select NO, you will go to Do you have a cable box? step 9. IJ Yes NO NOTES: A.

ページ18に含まれる内容の要旨

SET UP TV GUIDE Plus+ TV GUIDE Plus+ Setup STEP 6 1. Turn your cable box ON and tune it to channel 02. Tune your cable box to channel 02. Select your cable box brand from the list below. I Hitachi I 2. Use the CURSOR buttons to select your cable box brand from the list, then press SELECT. (It will take a few seconds for TV GUIDE Plus+ to check the cable box code.) press “Pldmv” to change brand. The”. pr**s Select. NOTE: When using a cable box with TV Guide Plus+, set your remote to T

ページ19に含まれる内容の要旨

SET UP TV GUIDE Plus+ TV GUIDE Plus+ Setup STEP 8 1. Using the CURSOR buttons, select the channel number to which Select cable box mtput channel: your cable box Output is set. It is usually set to Channel 3 or O/AUX Channel 4. 4 2. Then press the SELECT button on your remote. Press up/down to choose. Then. press Select. I STEP 9 TV GUIDE Plus+ Setup 1. Use the CURSOR buttons to select YES or NO, then press SELECT. Do you have a VCR 2. If you select YES, you will go to step IO. I

ページ20に含まれる内容の要旨

SET UP TV GUIDE Plus+ -“’ i - - : :$j,i :,I ; , : LA!9 Set U 0 STEP 10 TV GUIDE Plus+ Setup 1. Tune your VCR to channel 02, then turn if OFF. Tune your VCR to channel 02. then turn it off. Select your brand from the list below. 2. Use the CURSOR buttons to select your VCR brand from the Hitachi I I list, then press SELECT. (It will take a few seconds for TV GUIDE Pius+ to check the VCR code.) Basic connection for TV GUIDE Plus+ setup with cable box and VCR. f-Cable TV Coaxial Ca


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Hitachi 42V52 取扱説明書 プロジェクションテレビ 4
2 Hitachi 42V525 取扱説明書 プロジェクションテレビ 9
3 Hitachi 42V710 取扱説明書 プロジェクションテレビ 2
4 Hitachi 25K 60SX12B 取扱説明書 プロジェクションテレビ 4
5 Hitachi 27K 50SX8B 取扱説明書 プロジェクションテレビ 1
6 Hitachi 43FDX10B 取扱説明書 プロジェクションテレビ 0
7 Hitachi 43F300 取扱説明書 プロジェクションテレビ 2
8 Hitachi 42V715 取扱説明書 プロジェクションテレビ 1
9 Hitachi 43FDX11B 取扱説明書 プロジェクションテレビ 1
10 Hitachi 46F500 取扱説明書 プロジェクションテレビ 9
11 Hitachi 42V515 取扱説明書 プロジェクションテレビ 1
12 Hitachi 46EX3B 取扱説明書 プロジェクションテレビ 0
13 Hitachi 46EX4K 取扱説明書 プロジェクションテレビ 2
14 Hitachi 43GX10B, 50DX10B, 50GX30B, 60DX10B 取扱説明書 プロジェクションテレビ 6
15 Hitachi 46UX20B 取扱説明書 プロジェクションテレビ 0
16 Sony GRAND WEGA 2-694-282-13(1) 取扱説明書 プロジェクションテレビ 17
17 Sony Bravia KDS-60A3000, KDS-50A3000, KDS-55A3000 取扱説明書 プロジェクションテレビ 5
18 Sony GRAND WEGA KDF-55XS955 取扱説明書 プロジェクションテレビ 37
19 Sony BRAVIA KS-70R200A 取扱説明書 プロジェクションテレビ 7
20 Sony BRAVIA KS-60R200A 取扱説明書 プロジェクションテレビ 11