ページ1に含まれる内容の要旨
USER'S GUIDE
PREMIERE 30HD
HOME THEATER
PROJECTOR
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
PREFACE Preface ENGLISH ABOUT THIS MANUAL This manual is designed for use with the Matterhorn DLP Front Projector. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. COPYRIGHT © Copyright 2004 This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mech
ページ4に含まれる内容の要旨
Notices WARNING! To meet FCC requirements, a shielded power cord is required in order to prevent interference. It is essential that only the supplied power cord is to be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not approved by the party responsible for compliance could void your authority to operate the equipment. WARNING! The projector cooling fan continues to run for approximately 90 seconds after the projec
ページ5に含まれる内容の要旨
PREFACE PRODUCT DISPOSAL This projector utilizes a tin-lead solder, UHP Lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. Caution regarding the exhaust of the projector. Do not put Air Conditioners or Flowers near the exhaust Exhaust Vent vent. Air Conditioners or Flowers Focus Zoom Air flow LENS SHIFT (V) LENS SHIFT (H) ENTER Temp led STANDBY INPUT KEYSTONE MENU Before using the projector, please read this operatio
ページ6に含まれる内容の要旨
Contents Preface .............................................................................. 1 Notices .............................................................................. 2 Introduction Package Contents ............................................................. 7 Features ............................................................................ 8 Components ...................................................................... 9 Projector (Front and Top View) ...........
ページ7に含まれる内容の要旨
INTRODUCTION Easy to Use Functions Selecting the Picture Display Mode................................. 40 H-V Position Function...................................................... 43 White Enhance ................................................................ 45 Selecting the Economy Mode.......................................... 45 Setting the Power Save....................................... 45 Automatic Power Off Function......................................... 46 Source Select ....
ページ8に含まれる内容の要旨
Introduction 6 INTRODUCTION
ページ9に含まれる内容の要旨
INTRODUCTION Matterhorn DL F ON P OJ O Quick Guide © All rights reserved. This manual may not be copied in any media or form without the written consent of the manufacturer. P R T R ECT R User's Manual Package Contents Open the package and ensure that you have the following items: COMPONENT 1 COMPONENT 2 VIDEO/S-VIDEO DVI/PC Remote control Two “AAA” size batteries Power cord(By country) Ring cap cover set Quick Guide Operation manual (this manual) Optional accessories HD 15-pin VGA to HD 15-pin
ページ10に含まれる内容の要旨
Features • Newly developed 0.63-inch DMD™ chip provides significantly improved optical efficiency and excellent contrast ratio. • Newly developed DDR (Double Data Rate) chip eliminates Color Breaking phenomena common with previous generation DLP™ projectors. • Use of 250W high-output lamp realizes both high color purity and high brightness. Natural images made possible by high color reproducibility can be created with high-brightness, pow- erful expression capabilities. • Realizes vivid i
ページ11に含まれる内容の要旨
INTRODUCTION Components Projector (Front and Top View) Focus ring Zoom ring Adjust focus. Adjust screen display Focus Zoom Lens shift dial (Vertical) Lens shift dial (Horizontal) ENTER button LENS SHIFT (V) (H) LENS SHIFT For setting the selected items ENTER Adjustment buttons or adjustments from the menu. ( , , , ) For selecting menu items. STATUS Exit button EXIT MENU For exiting the OSD. ECO INPUT Temperature indicator This indicator glows red, when the temperature of the projector
ページ12に含まれる内容の要旨
WARNING Made in Taiwan Do not disassemble any components except the lamp chassis cover while replacing the lamp. Do not touch ventilation slots, lamp and objects next to them until they have sufficiently cooled down. Never insert any objects through ventilation holes. Do not use this unit near water or in a rainy/moist environment. Keep at least 0.3 foot (10 cm) of space between ventilation slots and nearest object or wall. VIDEO S-VIDEO Pr/Cr Pb/Cb Y RS-232 Pr/Cr Pb/Cb Y PC DVI
ページ13に含まれる内容の要旨
INTRODUCTION Remote Control Power (ON/OFF) button For turning the power on and off. MENU button Press this button to enter the OSD menus. Adjustment buttons ( , , , ) For displaying adjustment ENTER button For setting the selected items and setting screens. or adjustments from the menu. EXIT button For Exiting the OSD. COMPONENT 1 Component 1 button Press this button to connect component device sources. COMPONENT 2 Component 2 button Press this button to connect component device sour
ページ14に含まれる内容の要旨
COMPONENT 1 COMPONENT 2 VIDEO/S-VIDEO DVI/PC Using the Remote Control Available Range of the Remote Control The remote control can be used to control the projector within the ranges shown in the illustration. 23'(7 m) 30° Note 45° 30° • The signal from the remote control can be reflected by the screen. When using the remote control: • Be sure not to drop it, or expose it to moisture 45° or high temperature. 23'(7 m) • The remote control may malfunction under a 30° fluorescent lamp. If tha
ページ15に含まれる内容の要旨
CONNECTIONS AND SETUP Connections and Setup 13
ページ16に含まれる内容の要旨
Connecting the Projector to Other Devices Before Setting Up Note • Before connecting, be sure to turn off both the projector and the devices to be connected. After making all connections, turn on the projector and then the other devices. When connecting a computer, be sure that it is the last device to be turned on after all the connections are made. • Be sure to read the operation manuals of the devices to be connected before making connections. This projector can be connected to Video equ
ページ17に含まれる内容の要旨
CONNECTIONS AND SETUP Connecting to Video Equipment Connecting to Video VCR or other video equipment Equipment To S-video output terminal Using an S-video or a Composite Video Cable To Video output terminal Using an S-video or a composite video cable, a VCR, laser disc player or other video equipment can be connected to INPUT 3 input terminals. Note • The INPUT 3 (S-VIDEO) terminal uses a Composite video cable video signal system in which the picture is (commercially available) separa
ページ18に含まれる内容の要旨
To analog component Connecting to Component output terminal Video Equipment Using a Component Cable (INPUT 1 or 2) Use a component cable when connecting to the INPUT 1 or 2 terminal and component video equipment such as DVD players and DTV* decoders. DVD player or *DTV is an umbrella term used to describe the DTV* decoder new digital television system in the United Component cable (commercially available) States. Note • When connecting the projector to the video equipment in this way,
ページ19に含まれる内容の要旨
CONNECTIONS AND SETUP Connecting by Using a DVI- Optional DVI-D to HDMI D to HDMI Cable accessory cable Use a DVI to HDMI cable when connecting HDMI video equipment such as DVD players To HDMI output terminal to INPUT 4 terminal. Connect a DVI-D to HDMI cable to 1 the projector. • Secure the connectors by tightening the thumbscrews. Connect the above cable to the 2 video equipment. DVD player or DVI-D to HDMI cable DTV* decoder (commercially available) Note • Select the input signal ty
ページ20に含まれる内容の要旨
Connecting the Projector to a Computer Connecting to a Computer Optional HD 15-pin Connect the projector to the computer accessory VGA cable using the HD 15-pin VGA cable. • Secure the connectors by tightening the thumbscrews. Notebook Computer HD 15-pin VGA cable (sold separately) Note To VGA output terminal • See page 60 “Computer Compatibility Chart” for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of the
