ページ1に含まれる内容の要旨
Projector
iPJ-AW250N
(Type nos. iPJ-AW250N, iPJ-AW250NM)
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING This symbol indicates information that, if ignored, c
ページ2に含まれる内容の要旨
Contents Introduction . ............. .3 SETUP menu ............. .44 Features ...................... 3 D-ZOOM, D-SHIFT, PICT.POSIT.H, , Checking the contents of package ... 3 KEYSTONE, KEYSTONE, PERFECT FIT AUTO ECO MODE, ECO MODE, MIRROR, Part names .................... 4 STANDBY MODE, MONITOR OUT Setting up . ............... .7 AUDIO menu . ............ .47 Arrangement ................... 7 Connecting with your devices ...... 9 VOLUME, SPEAKER, AUDIO SOURCE, Connecting to a power s
ページ3に含まれる内容の要旨
Introduction Introduction Features The projector provides you with the broad use by the following features. The unique lens and mirror system realizes ultra short distance projection,which gives you more various way of use. The motorized lens door of fers you very simple use of the projector. The double layer filter system is expected to function longer and offers you less maintenance frequency. The HDMI port can support various image equipment which have digital interface t
ページ4に含まれる内容の要旨
Introduction Part names (2) HOT! (1) Projector (4) (1) Lamp cover (97) The lamp unit is inside. (2) Control panel (5) (12) (3) Elevator feet (x 2) (24) (4) Remote sensor (16) (14) (5) Lens (102) (11) (6) Intake vents (13) (7) (6) (8) (7) Filter cover (99) (10) The air filter and intake vent are inside. HOT! (8) Battery cover (17) The internal clock battery is Small inside. (9) Speaker (12, 21, 47) (3) (9) (10) Exhaust vent (18) Large (11) AC IN (AC inlet) (14) (15) (12) Ports (
ページ5に含まれる内容の要旨
Introduction Control panel (1) STANDBY/ON button (19) (4) (3) (6) (2) INPUT button (21) (3) POWER indicator (19, 107, 108) (4) TEMP indicator (107, 108) (5) LAMP indicator (107, 108) Buttons ◄/►/▲/▼ (6) FOCUS +/- buttons (5) (7) (2) (1) when no menu is displayed (25), or Cursor ◄/► buttons when a menu is displayed (29). FOCUS +/- function is invalid when the USB TYPE A port is selected as the input source. (7) MENU buttons when no menu is displayed (29), or Cursor ▲/▼ buttons when
ページ6に含まれる内容の要旨
Introduction Remote control (1) VIDEO button (22) (2) (10) (1) (4) (2) COMPUTER button (22) MY SOURCE/ (6) VIDEO COMPUTER DOC.CAMERA (3) (3) SEARCH button (23) ASPECT AUTO SEARCH BLANK (5) (7) (4) STANDBY/ON button (19) MAGNIFY FREEZE PAGE VOLUME (16) (12) UP ON (5) ASPECT button (23) (8) DOWN (14) OFF (6) AUTO button (25) (9) (11) KEYSTONE MY BUTTON MUTE 12 (19) (13) (7) BLANK button (28) FOCUS D-ZOOM - + - + (17)
ページ7に含まれる内容の要旨
Setting up Setting up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to table T-1 and figures F-1 and F-2 at the end of User's Manual (concise) to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen: 1280 x 800 a Screen size (diagonal) b1 , b2 Projection distance (±8%) c1 , c2 Screen height (±8%) • For the case of installation in special conditions suc
ページ8に含まれる内容の要旨
Setting up Arrangement (continued) WARNING ►Place the projector in a cool place, and ensure that there is sufficient ventilation. The high temperature of the projector could cause fire, burns and/or malfunction of the projector. • Do not stop-up, block or otherwise cover the projector's vents. • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Do not place or attach anything that would block the lens or vent holes. • Do not place the projecto
ページ9に含まれる内容の要旨
Setting up Connecting with your devices Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged. After making sure that the device and projector are turned off, connect them following the instruction
ページ10に含まれる内容の要旨
AUDIO USB DISPLAY RS-232C LAN HDMI (A) OUT Setting up Connecting with your devices (continued) About Plug-and-Play capability • Plug-and-Play is a system composed of a computer, its operating system and peripheral equipment (i.e. display devices). This projector is VESA DDC 2B compatible. Plug-and-Play can be used by connecting this projector to a computer that is VESA DDC (display data channel) compatible. - Take advantage of this feature by connecting a computer cable to the COMPUTER IN1
ページ11に含まれる内容の要旨
Setting up Connecting with your devices (continued) NOTE • Before connecting the projector to a computer, consult the computer’s manual and check the compatibility of the signal level, the synchronization methods and the display resolution output to the projector. - Some signal may need an adapter to input this projector. - Some computers have multiple screen display modes that may include some signals which are not supported by this projector. - Although the projector can display signals
ページ12に含まれる内容の要旨
Setting up Connecting with your devices (continued) • If you insert a USB storage device, such as a USB memory, into the USB TYPE A port and select the port as the input source, you can view images stored in the device (85). • You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug. In that case, the built-in speaker outputs the sound from the microphone, even while the sound from the projector is output. You can input line level signal to the MIC port from equipment
ページ13に含まれる内容の要旨
Setting up Connecting with your devices (continued) To use network functions of the projector, connect the LAN port with the computer's LAN port, or with an access point that is connected to the computer with wireless LAN, using a LAN cable. To use NETWORK BRIDGE function, also connect the CONTROL port and an RS-232C port of the external device to communicate as a network terminal. See the User's Manual - Network Guide for details of the network functions. Access point Computer RS-232C LAN
ページ14に含まれる内容の要旨
Setting up Connecting to a power supply Put the connector of the power cord into the 1. AC IN (AC inlet) of the projector. Firmly plug the power cord’s plug into the 2. outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT POWER Power cord AC IN ON function activated (55), the connection of the power supply make the projector turn on. WARNING ►Please use extra caution when connecting the p
ページ15に含まれる内容の要旨
Setting up Using the cable cover Utilize the cable cover as the guard and blind for the connecting parts. Connect the signal cables and the power cord to the projector first. 1. Combine parts as shown in figure, 2. and assemble the cable cover. 3 3 1 2 1 2 Insert the three knobs on the cable cover into the three holes on the projector 3 . as shown in the figure. Pass the cables through the holes on the bottom of the cable cover. knobs 1 3 1 2 2 3 CAUTION ►Be careful not to pinch the cables
ページ16に含まれる内容の要旨
Remote control Remote control Installing the batteries Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. Holding the hook part of the battery 13 2 1. cover, remove it. Align and insert the two AA batteries 2. (HITACHI MAXELL, Part No.LR6 or R6P) according to their plu
ページ17に含まれる内容の要旨
Remote control Changing the frequency of remote control signal The accessory remote control has the two choices on signal ASPECT AUTO SEARCH BLANK frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control MAGNIFY FREEZE PAGE VOLUME UP ON does not function properly, attempt to change the signal frequency. DOWN OFF In order to set the Mode, please keep pressing the combination of KEYSTONE MY BUTTON MUTE 12 (2) (1) two buttons listed below simultaneously for about 3 seconds. FOC
ページ18に含まれる内容の要旨
Interactive pen Interactive pen Installing the battery Turn the battery cover of the pen to the left to open 1. it. As illustrated in the diagram, insert the AAA battery 2. into the battery cover with the - end facing the front. (HITACHI MAXELL, Part No. LR03) Attach the battery cover by turning it to the right 3. until it is completely closed. Exchanging the tip of the pen The tip of the pen When the tip of the pen is shortened due to wearing, exchange it according to the following pr
ページ19に含まれる内容の要旨
Power on/off Power on/off Turning on the power STANDBY/ON button Make sure that the power cord is firmly POWER indicator 1. and correctly connected to the projector and the outlet. Make sure that the POWER indicator is 2. steady orange (107). Confirm that there is nothing that the lens 3. door hits while opening. Press STANDBY/ VIDEO COMPUTER DOC.CAMERA MY SOURCE/ ASPECT AUTO SEARCH BLANK ON button on the projector or the MAGNIFY FREEZE PAGE VOLUME UP ON DOWN OFF remote control. The
ページ20に含まれる内容の要旨
Power on/off Turning off the power Press the STANDBY/ON button on the projector or the remote control. 1. The message “Power off?” will appear on the screen for about 5 seconds. Confirm that there is nothing that the lens door hits while closing. 2. Press the STANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange. The lens door will close right after the lamp goes off. However, to maintain better picture quali
