ページ1に含まれる内容の要旨
IN5100 Series Networking Guide
This guide is only intended to explain Network Functions. For safety, operations or any other issues, refer to the pro-
jector’s User’s Guide or Safety Booklet.
TABLE OF CONTENTS
Network Functions 2
Before using the network functions 2
Configuring and controlling the projector via a web browswer 3
Settings 5
Network Information 6
Network Setting 7
Mail Settings 8
Alert Settings 9
Schedule Settings 10
Date/Time Settings 11
Security Settings 12
Projector Control 13
ページ2に含まれる内容の要旨
Network Functions This projector is equipped with the following network functions. Configuring and Controlling the Projector via a Web Browser You can change the settings of or control the projector via a network by using a web browser from a PC that is con- nected to the same network. Failure & Warning Alerts via E-mail The projector can automatically send an alert to specified e-mail addresses when the projector requires maintenance or has encountered an error. Projector Management via SNMP T
ページ3に含まれる内容の要旨
Configuring and controlling the projector via a web browser You can adjust or control the projector via a network from a web browser on a PC that is connected to the same net- work. NOTE: Internet Explorer 5.5 or higher or Netscape 6.2 or higher are required. If JavaScript is disabled in your web browser configuration, you must enable JavaScript in order to use the projec- tor web pages properly. See the Help files for your web browser for details on how to enable JavaScript. If no operati
ページ4に含まれる内容の要旨
Below are the factory default settings for administrator IDs, user IDs and passwords. Item ID Password Administrator Administrator ID User ID User 4
ページ5に含まれる内容の要旨
Settings Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1 Enter [http://192.168.1.10] into the address bar of the web browser and the screen below will be displayed. 2 Enter your ID and password and click [Logon]. If the logon is successful this screen will be displayed (if logged on as an Admin). 3 Click the desired operation or configuration item on the main menu located on the left-hand
ページ6に含まれる内容の要旨
Network Information NOTE: All screen images shown in this document are screens of a logon using an Administrator’s ID. Any Adminis- trator-only functions will not be displayed when using a User ID. Displays the projector’s current network configuration. Item Description DHCP Displays the DHCP configuration settings. IP Address Displays the current IP address. Subnet Mask Displays the Subnet Mask. Default Gateway Displays the Default Gateway. MAC Address Displays the MAC Address. Firmware Date Di
ページ7に含まれる内容の要旨
Network Setting Displays and configures network settings. Item Description IP Configuration Configures network settings. DHCP On/ Off Enables/disables DHCP. IP Address Configures the IP address when DHCP is disabled. Subnet Mask Configures the Subnet Mask when DHCP is disabled. Default Gateway Configures the Default Gateway when DHCP is disabled. Projector Name Configures the projector name. SysLocation Configures the location to be referred to when using SNMP. SysContact Configures the contact
ページ8に含まれる内容の要旨
Mail Settings Item Description Send Mail Click the [Enable] check box to use the e-mail function. Configure the conditions for sending email under [Alert Settings]. SMTP Server IP Address Configures the address of the mail server in IP format. Sender E-mail address Configures the sender e-mail address. The length of the sender e-mail address can be up to 255 alphanumeric characters. Recipient E-mail address Configures the e-mail address of up to five recipients. You can also specify [TO] or [C
ページ9に含まれる内容の要旨
Alert Settings Item Description Lamp won’t strike Lamp won’t turn on after 5 attempts. Lamp Time Over Lamp has exceeded its specified lifetime. Lamp unexpectedly goes out Lamp failed after it had successfully lit. Fan failure Fan is not working. Over temp condition Projector is overheating. Unidentifiable Error Unknown error. Lamp Cover Error The lamp door is not installed properly. Filter Time Over Filter should be cleaned. Temp Sensor Out Sensor is not working. Schedule Execution Error A sched
ページ10に含まれる内容の要旨
Schedule Settings Item Description Daily Configures the daily schedule. Schedule Click the [Enable] check box to enable daily scheduling. Schedule List Displays the current daily schedule. Sunday-Saturday Configures the Sunday through Saturday daily schedules. Schedule Click the [Enable] check box to enable daily scheduling. Schedule List Displays the current daily schedule. Specific date 1-5 Configures the specific date (No.1-5) schedule. Schedule Click the [Enable] check box to enable specific
ページ11に含まれる内容の要旨
Date/Time Settings Item Description Current Date Configures the current date in Year/Month/Day format. Current Time Configures the current time in Hour:Minute:Second format. Daylight Savings Time Click the [ON] check box to enable daylight savings time and set the following items. Start-End Configures the date and time daylight savings time begins/ends. Month/week/day/hour/minute Configures the month daylight savings time begins (1~12)/the week of the month (First, 2,3,4,Last)/the day (Sun-Sat
ページ12に含まれる内容の要旨
The Internal Clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time. Security Settings Item Description Administrator authority Configures the Administrator ID and Password. Admin ID Configures the Administrator ID. The length of the text can be up to 32 alphanumeric characters. Admin Password Configures the Administrator Password. The length of the text can be up to 255 alphanumeric characters. User authority Configures the User ID and Password. User ID Con
ページ13に含まれる内容の要旨
Projector Control Item Description Main Basic projector commands including power on/off and changing source. Picture Picture settings including keystone, contrast, and brightness. Settings Other settings including audio, source assignment, and system configuration. NOTE: For detail about projector control functions, see the projector’s User’s Guide. 13
ページ14に含まれる内容の要旨
Projector Status Item Description Error Displays the current error status Lamp Time Displays the usage time for the current lamp. Total Lamp Hours Displays the usage time for the all lamps Filter Time Displays the usage time for the current filter. Power Status Displays the current power status. Current Source Displays the current input signal source. Blank On/Off Displays the Blank On/Off status. Mute Displays the current Mute On/Off status. Freeze Displays the current Freeze On/Off status. 14
ページ15に含まれる内容の要旨
Network Restart Item Description Restart Restarts the projector’s network connection to activate new configuration settings. NOTE: Restarting requires you to re-log on to control or configure the projector. Failure and Warning Alerts via E-mail The projector can automatically send an alert to specified e-mail addresses when the projector requires maintenance or has encountered an error. NOTE: Up to five e-mail addresses can be specified. The projector may be not able to send e-mail if the
ページ16に含まれる内容の要旨
Subject line: Test Mail Text: Send Test Mail Date Time IP Address MAC Address 3 Configure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings] on the main menu. 4 Select and configure each alert item. Refer to [Alert Settings] in [Configuring and Controlling the Projector via a Web Browser] for further information. 5 Click the [Apply] button to save the settings. Failure/Warning e-mai
ページ17に含まれる内容の要旨
Projector management via SNMP NOTE: It is recommended that SNMP functions be carried out by a network administrator. SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP Settings Configure the following items via a web browser to use SNMP. Example: If the IP address of the projector is set to 192.168.1.10: 6 Enter [http://192.168.1.10] into the address bar of the web browser. 7 Enter the Administrator ID and Password and click [Logon]. 8 Click [
ページ18に含まれる内容の要旨
Controlling the projector via scheduling The projector can be automatically controlled via scheduling. NOTE: You can schedule the following control events: Power ON/OFF, Input Source. There are 3 types of Scheduling, 1) daily 2) day of the week 3) specific date. The priority for scheduled events is as follows 1) specific date 2) day of the week 3) daily. Up to five specific dates are available for scheduled events. Priority is given to those with the lower numbers when more than one eve
