ページ1に含まれる内容の要旨
Projector
CP-X2011N/CP-X2511N
/CP-X3011N/CP-X4011N
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING This symbol indicates information that, if ignored, could
ページ2に含まれる内容の要旨
Contents Introduction . ............. .3 SETUP menu ............. .40 Features ...................... 3 AUTO KEYSTONE, KEYSTONE, AUTO ECO MODE, ECO MODE, MIRROR, STANDBY MODE, Checking the contents of package ... 3 MONITOR OUT Part names .................... 4 Setting up . ............... .7 AUDIO menu . ............ .42 VOLUME, SPEAKER, AUDIO SOURCE, Arrangement ................... 7 HDMI AUDIO, MIC LEVEL, MIC VOLUME Connecting with your devices ...... 9 ..... 14 Connecting to a power
ページ3に含まれる内容の要旨
Introduction Introduction Features The projector provides you with the broad use by the following features. This projector has a variety of I/O ports that supposedly cover for any business scene. The HDMI port can support various image equipment which have digital interface to get clearer pictures on a screen. This projector realizes the large projection image, even if in a small space. If you insert a USB storage device, such as a USB memory, into the USB TYPE A port and selec
ページ4に含まれる内容の要旨
Introduction Part names Projector (1) HOT! (2) (3) (4) (1) Lamp cover (85) The lamp unit is inside. (2) Focus ring (21) (12) (3) Zoom ring (21) (4) Control panel (5) (7) (6) (5) Elevator buttons (x 2) (21) (5) (6) Elevator feet (x 2) (21) (8) (9) (6) (10) (7) Remote sensor (15) (6) (8) Lens (90) (11) (6) (9) Intake vents (10) Filter cover (87) The air filter and intake vent are inside. (11) Battery cover (12) The internal clock battery is inside. (13) HOT! (12) Speaker (12, 18, 4
ページ5に含まれる内容の要旨
Introduction Control panel (1) STANDBY/ON button (17) (5) (6) (2) INPUT button (18) (3) MENU button (26) It consists of four cursor buttons. (4) POWER indicator (17, 93, 94) (5) TEMP indicator (93, 94) (6) LAMP indicator (93, 94) (1) (2) (3) (4) Rear panel (9 ~ 13) (1) USB TYPE A port (10) COMPUTER IN1 port (2) LAN port (11) COMPUTER IN2 port (3) HDMI port (12) MONITOR OUT port (4) USB TYPE B port (13) CONTROL port (5) MIC port (14) VIDEO port (6) AUDIO IN1 port (15) S-VIDEO po
ページ6に含まれる内容の要旨
Introduction Remote control (1) VIDEO button (19) (2) (10) (2) COMPUTER button (19) (1) (4) MY SOURCE/ (3) SEARCH button (20) VIDEO COMPUTER DOC.CAMERA (6) (3) ASPECT AUTO SEARCH BLANK (5) (7) (4) STANDBY/ON button (17) PAGE VOLUME (16) MAGNIFY FREEZE (12) UP (5) ASPECT button (20) ON (8) (14) DOWN (6) AUTO button (22) OFF (9) (11) KEYSTONE MY BUTTON MUTE 12 (7) BLANK button (25) (19) (13) (8) MAGNIFY - ON button (24) (17) (15) POSITION MENU (20) (18) (9) MAGNIFY - OFF button (2
ページ7に含まれる内容の要旨
Setting up Setting up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024 x 768 a Screen size (diagonal) b Projection distance (±10%) c1 , c2 Screen height (±10%) On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of t
ページ8に含まれる内容の要旨
Setting up Arrangement (continued) WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over, it could cause injury and/or damage to the projector. Using a damaged projector could then result in fire and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or inclined stand. • Do not place the projector on its side, front or rear position. • Consult with your dealer before a special in
ページ9に含まれる内容の要旨
Setting up Connecting with your devices Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged. After making sure that the device and projector are turned off, connect them following the instruction
ページ10に含まれる内容の要旨
AUDIO USB DISPLAY RS-232C HDMI OUT (A) Setting up Connecting with your devices (continued) • When AUTO is selected for the COMPUTER IN1 or COMPUTER IN2 port in COMPUTER IN of the INPUT menu, that port will accept component video signals (38). • When the USB TYPE B port and the computer's type A USB port are connected, you can use the USB TYPE B port as a picture input port from the computer, or use the remote control as a simple mouse and keyboard of the computer. (16, 51). Computer VCR/
ページ11に含まれる内容の要旨
Setting up Connecting with your devices (continued) NOTE • Before connecting the projector to a computer, consult the computer’s manual and check the compatibility of the signal level, the synchronization methods and the display resolution output to the projector. - Some signal may need an adapter to input this projector. - Some computers have multiple screen display modes that may include some signals which are not supported by this projector. - Although the projector can display signals
ページ12に含まれる内容の要旨
Setting up Connecting with your devices (continued) • If you insert a USB storage device, such as a USB memory, into the USB TYPE A port and select the port as the input source, you can view images stored in the device (73). • You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug. In that case, the built-in speaker outputs the sound from the microphone, even while the sound from the projector is output. You can input line level signal to the MIC port from equipment
ページ13に含まれる内容の要旨
Setting up Connecting with your devices (continued) To use network functions of the projector, connect the LAN port with the computer's LAN port, or with an access point that is connected to the computer with wireless LAN, using a LAN cable. To use NETWORK BRIDGE function, also connect the CONTROL port and an RS-232C port of the external device to communicate as a network terminal. See the User's Manual - Network Guide for details of the network functions. Computer Access point RS-232C LAN
ページ14に含まれる内容の要旨
Setting up Connecting to a power supply Put the connector of the power cord into the 1. AC IN (AC inlet) of the projector. Firmly plug the power cord’s plug into the 2. outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT POWER AC IN Power cord ON function activated (50), the connection of the power supply make the projector turn on. WARNING ►Please use extra caution when connecting the p
ページ15に含まれる内容の要旨
Remote control Remote control Installing the batteries Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. Holding the hook part of the battery 13 2 1. cover, remove it. Align and insert the two AA batteries 2. (HITACHI MAXELL, Part No.LR6 or R6P) according to their plu
ページ16に含まれる内容の要旨
Remote control Changing the frequency of remote control signal The accessory remote control has the two choices on signal MY SOURCE/ VIDEO COMPUTER DOC.CAMERA frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control ASPECT AUTO SEARCH BLANK does not function properly, attempt to change the signal frequency. MAGNIFY FREEZE PAGE VOLUME UP ON In order to set the Mode, please keep pressing the combination of DOWN OFF two buttons listed below simultaneously for about 3 seconds. KEYST
ページ17に含まれる内容の要旨
Power on/off Power on/off STANDBY/ON button Turning on the power POWER indicator Make sure that the power cord is firmly and 1. correctly connected to the projector and the outlet. Make sure that the POWER indicator is 2. steady orange (93). Then remove the lens MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK cover. PAGE VOLUME MAGNIFY FREEZE UP ON DOWN OFF Press STANDBY/ON button on the KEYSTONE MY BUTTON MUTE 12 3. POSITION MENU projector or the remote control. ENTER
ページ18に含まれる内容の要旨
Operating Operating VOLUME +/- button Adjusting the volume MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK Use the VOLUME +/VOLUME - buttons to adjust the volume. 1. FREEZE PAGE VOLUME MAGNIFY UP A dialog will appear on the screen to aid you in adjusting the ON DOWN volume. If you do not do anything, the dialog will automatically OFF KEYSTONE MY BUTTON MUTE disappear after a few seconds. 12 ● When is selected for current picture input port, the volume adjustment is di
ページ19に含まれる内容の要旨
Operating Selecting an input signal (continued) COMPUTER button Press COMPUTER button on the remote control. 1. Each time you press the button, the projector switches its MY SOURCE/ input port from the current port as below. VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK COMPUTER IN1 COMPUTER IN2 LAN MAGNIFY FREEZE PAGE VOLUME UP ON USB TYPE B USB TYPE A DOWN OFF ● While ON is selected for AUTO SEARCH item in OPTION KEYSTONE MY BUTTON MUTE 12 m
ページ20に含まれる内容の要旨
Operating Searching an input signal SEARCH button Press SEARCH button on the remote control. MY SOURCE/ 1. VIDEO COMPUTER DOC.CAMERA The projector will start to check its input ports as below in ASPECT AUTO SEARCH BLANK order to find any input signals. MAGNIFY FREEZE PAGE VOLUME UP ON When an input is found, the projector will stop searching DOWN OFF and display the image. If no signal is found, the projector will KEYSTONE MY BUTTON MUTE 12 return to the state selected before the opera
