ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
determined by turning the equipment off and on, the user is encouraged to try to correct the Declaration of Conformity interference by one or more of the following measures: Manufacturer: InFocus Corporation 13190 SW 68th Parkway, Portland, Oregon 97223-8368 USA --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. We declare under our sole responsibility that this projector conforms to the following --Connect the equipment into an outlet
ページ3に含まれる内容の要旨
Maintenance 47 Table of Contents Cleaning the lens 47 Introduction 4 Using the security lock 47 Positioning the projector 6 Replacing the projection lamp 48 Connecting a computer source 7 VESA connection 7 HDMI connection 7 Power connection 7 Optional computer connections 7 Displaying an image 8 Adjusting the image 9 Video device connections 10 Composite video connection 10 HDMI 1.4 connection 10 VESA connection 10 Component video connection 10 Shutting down the projector 11 Troubleshooting your
ページ4に含まれる内容の要旨
3’ / 1 m 8’/2.4m Important Operating Considerations for Safety • Place the projector in a horizontal position no greater than 15 degrees off axis. • Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. Do not place the projector on a tablecloth or other soft covering that may block the vents. • Locate the projector at least 4' (1.2 m) away from any heating or cooling vents. • Only genuine InFocus lamps are tested for use in this projector. InFocus
ページ5に含まれる内容の要旨
Introduction Your new digital projector is simple to connect, easy to use, and straightforward to push-button keypad maintain. The IN1110a has native XGA 1024x768 resolution, and the IN1112a has WXGA 1280x800 resolution. This guide applies to all products. They are compatible with a wide variety of computers and video devices. Product specifications To read the latest specifications on your multimedia projector, be sure to visit our website at www.infocus.com, as specifications are subject t
ページ6に含まれる内容の要旨
• Composite video Connector panel The projector provides the following connectors: • Mini USB Type B: Used for advancing slides, Display over USB, saving files to internal memory and software upgrades. • USB Type A: Used to display photos, videos and other files from a USB source device. • Audio in • Audio out • HDMI • VESA computer Composite Audio HDMI video in Audio USB A VESA Mini USB Type out computer B connector multimedia ® security lock 5
ページ7に含まれる内容の要旨
Positioning the projector Table 1: (IN1110a) To determine where to position the projector, consider the size and shape of your Range of distance to the screen for a given screen size screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guidelines: Distance to screen Maximum Minimum • Position the projector on a flat surface at a right angle to the screen. The Diagonal Screen distance Distance projector must
ページ8に含まれる内容の要旨
Connecting a computer source connect computer cable VESA connection multimedia Connect one end of the provided computer cable to the Computer connector on the ® projector and the other to the VESA connector on your computer. If you are using a desktop computer, you will need to disconnect the monitor cable from the computer’s video port first. HDMI connection HDMI is a standard, uncompressed, all-digital audio/video interface. HDMI multimedia provides an interface between sources, such as se
ページ9に含まれる内容の要旨
Displaying an image press Power button Touch the Power button. The Power indicator blinks green and the fans start to run. When the lamp comes on, the start up screen displays and the Power indicator is steady green. It can take a minute for the image to achieve full brightness. Power indicator ? No start up screen? Get help on page 12. turn on computer or Turn on your computer or video device. video device The image should appear on the projection screen. If it doesn’t, press the Source but
ページ10に含まれる内容の要旨
Adjusting the image release button adjust height If necessary, adjust the height of the projector by pressing the elevator foot release button to extend the foot. If necessary, rotate the leveling foot located at the rear of the projector. Avoid placing your hands near the hot exhaust vent at the side of the projector. elevator foot Position the projector the desired distance from the screen at a 90 degree angle to the screen. adjust distance See page 6 for a table listing screen sizes and dis
ページ11に含まれる内容の要旨
Component video connection Video device connections If your HD video device has component connectors, an optional Component to No video cables are provided with the projector. You can order cables from VESA adapter can be used. Plug the component cable into the video device. Plug InFocus or provide your own. the other end of the component cable into the adapter and plug the adapter into the Computer connector. Keep in mind that video output from component connections Composite video connect
ページ12に含まれる内容の要旨
. Shutting down the projector The projector automatically displays a black screen after no active source is detected for 30 minutes. This black screen helps preserve the life of the projector. The image returns when an active source is detected or a remote or keypad button is pressed. Table 3: Status indicator light behavior and meaning Auto Off Time The projector also has an Auto Off Time feature that automatically turns the Status Indicator Panel icons Meaning projector off after no active
ページ13に含まれる内容の要旨
A A Problem Solution Result No start up screen Plug power cord into the projector and press the Correct image power button multimedia ® Only start up screen appears Computer image projected Press the Source button activate laptop’s external port Restart laptop 12 Startup Screen Startup Screen A
ページ14に含まれる内容の要旨
A A A A Problem Solution Result No computer image, just the words “Signal out Press the Auto Image button on the keypad. Adjust computer Computer image projected of range” refresh rate (Windows 7: Control Panel > Display > Screen Resolution > Advanced Settings > Monitor tab). Varies per operating system. You may also need to set a different resolution on your computer, as shown in the following problem, “image fuzzy or cropped” Only my laptop’s background appears, not the Change the Multiple
ページ15に含まれる内容の要旨
Problem Solution Result Image fuzzy or cropped Change the computer's "Resolution" setting to match the Image clear and not cropped projector's resolution (Windows 7: Control Panel > Display > Screen Resolution). Varies per operating system. A A A Image not centered on screen Move projector, adjust zoom, adjust height Correct image Adjust horizontal or vertical position in Advanced > Setup > Image Setup menu 14 HDMI audio in computer in video 1 video 2 audio out USB
ページ16に含まれる内容の要旨
Problem Solution Result Image not square Adjust Keystone on keypad Square image Image not sharp Adjust Sharpness in the Basic menu Correct image AB AB Image does not fit 4:3 or 16:9 screen Change aspect ratio to 4:3 or 16:9 in the Basic menu Correct image 15
ページ17に含まれる内容の要旨
B B A A Problem Solution Result Image reversed left to right Turn off Rear Project in Advanced > Setup > Image Position Correct image menu A AB Projected colors don’t match source Adjust color, tint, brightness, contrast in the Basic menu Correct image COLOR COLOR The video embedded in my PowerPoint Turn off the internal LCD display on your laptop Embedded video plays correctly presentation does not play on the screen 16 B A A
ページ18に含まれる内容の要旨
Problem Solution Result Lamp won’t turn on, Temperature light is on Make sure vents aren’t blocked, turn off the projector and Lamp turns on allow it to cool for one minute Temperature light “Replace lamp” message appears at startup, Lamp must be replaced (see page 48) Lamp turns on lamp won’t turn on, Lamp light is turned on Lamp light loosen screws loosen screws 17 Startup Screen Startup Screen
ページ19に含まれる内容の要旨
Still need assistance? If you need assistance, visit our website at www.infocus.com/service or call us. Check out our HOW TO section there for additional information. See the Quick Start Booklet for support contact information. This product is backed by a limited warranty. An extended warranty plan may be purchased from your dealer. When sending the projector in for repair, we recommend shipping the unit in its original packing material, or having a professional packaging company pack the u
ページ20に含まれる内容の要旨
Troubleshooting the remote Using the remote control • Make sure the batteries are installed in the proper orientation and are not dead. The remote uses two (2) AA batteries (batteries not included). They are easily • Make sure you’re pointing the remote at the front of the projector or at the installed by removing the cover from the remote’s back, aligning the + and - ends of screen, not the computer, and are within the remote range of 30 feet (9 m). For the batteries, sliding them into plac
