Dacor ER48Dの取扱説明書

ページ1に含まれる内容の要旨

ER36D, ER48D
PLANNING
®
Revised Epicure Ranges
GUIDE
03/10/09 1/2
All tolerances: +/- 1/16” (+/- 1.6mm) unless otherwise stated
48” (1219mm)
ELECTRIC CIRCUIT REQUIREMENTS
Total Connected Load
Range Model Circuit Required
240 Vac, 4-wire* 60 Hz,
ER36D 30 Amp. (Min.) 40 Amp. 6.5 kW (28 Amp.)
**
(Recommended)
240 Vac, 4-wire* 60 Hz,
**
ER48D 10.0 kW (42 Amp.)
50 Amp.
* 4-wire, two 120 Vac hot (L1 and L2), one neutral, one ground
1 1/16” (27mm) to cooking
**
surface (top of grates) from
top of tri

ページ2に含まれる内容の要旨

ER36D, ER48D PLANNING ® Revised Epicure Ranges GUIDE 03/10/09 2/2 Tolerances: +1/16”, -0, (+1.6mm, -0) unless otherwise stated F Gas and Electrical Service ◊ For replacement purposes, the location of the existing utilities may be utilized provided they do not interfere with the sides or rear of the range. Check local building codes for permissible locations. ◊ An external manual shut-off valve must be installed between 13” (330mm) 5 Max. the gas inlet and the range, for the purpose of turn