ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Contents Contents ...........................................................................................................................................1 Preface..............................................................................................................................................2 Notice for use...........................................................................................
ページ4に含まれる内容の要旨
Preface Thank-you for your purchase of a MyMuvi Personal Digital Camcorder. Please read this manual before using this camera and put it in safe place for future reference. The content in this manual refers to the latest information available at the time of printing. The screen display, illustration and other information in the manual are representative of the operation of the camera. Your camera may differ due
ページ5に含まれる内容の要旨
camera must be formatted in this camera prior to use. Maintenance and care: 1. Store your camera in a case to avoid scratching the lens and screen. 2. To clean the lens, first blow the dust from the lens surface, then use a cloth or tissue designed for optical devices to clean the lens. If necessary, use a drop lens cleaner. Never use an organic cleaner to clean the camcorder. 3. Never touch the lens with your fingers. 5. Always store the camcorder in a cool, dry, dark place with th
ページ6に含まれる内容の要旨
System requirements Please refer to the following minimum requirements for your computer system to interface with the camcorder. These are the MINIMUM requirements, faster processors and more memory will result is a better user experience. Operation System Microsoft Windows 2000,XP, vista, Windows7 CPU Intel PIII667 or CPU of equal performance or above Memory Above 128 MB Sound card and display card DirectX8 or above.
ページ7に含まれる内容の要旨
Getting started 1. Appearance and Buttons LCD Up Shutter/OK Mode Delete Left Right Down 5
ページ8に含まれる内容の要旨
USB Connector Lens USB Switch TV Out Port LED Indicator Microphone Power Speaker HDMI Out Port SD/MMC Card Slot Battery Cover Tripod Mount Strap Holder 6
ページ9に含まれる内容の要旨
2. Basic operation 2.1 Install battery Press and slide the battery cover as shown. Insert the lithium battery. Be sure to observe the correct polarity of the battery terminals. Close the battery cover. 2.2 Charge Battery 1. Power off the camera. 2. Connect the camera to the computer USB port or an optional USB AC power supply to charge the battery. 3. During charging, the busy light will come on. The light will go out when the battery is fully charged. 2.3 Insert SD/MMC/SDHC card
ページ10に含まれる内容の要旨
stays latched. Do not force the card. If it cannot be inserted easily, check the card’s position according to the position mark on the camera. Push to release the inserted card if you wish to remove or replace the card. Turn your camcorder OFF before inserting or removing the SD Card. Failing to power off the camera may cause permanent damage to the card or corrupt the data on the card. - Note that the SD Card has a LOCK switch on the side. Set the switch to un-LOCK position to be ab
ページ11に含まれる内容の要旨
2.5 Setup menu In power-off state, press and hold Shutter/OK key then press the POWER key. When the setup menu is displayed you can release the Shutter/OK key and press the direction keys to move the cursor or adjust the menu value. Press the Shutter/OK key to confirm your menu selection. Press the Delete key to exit the menu. In the setup mode you can set the Language, Date & Time, TV out mode, Power frequency and view the Firmware version. 2.6 Changing mode At power on, the camcorder
ページ12に含まれる内容の要旨
In the Still photo standby mode, pressing the Left or Right navigation key to change the video size between 5M(2592x1944), 3.1M(2048X1536), 1.3M(1280x960); Press the up key or down key to zoom in or zoom out the image. Note: If the memory card is full or locked, when you press the Shutter/OK key the camera will not record. Be sure to power off the camera before inserting or removing the memory card. 2.9 Playback mode Press mode key to select the playback mode. Press ◄ ke
ページ13に含まれる内容の要旨
2.10 TV output After the camera is powered on, insert the mini plug of the AV cable into the TV output port of the camera. The yellow RCA plug of the cable should be connected to VIDEO IN port of TV ， red and white RCA plug should be connected to corresponding AUDIO IN port of TV. 2.11 HDMI output To output the image and sound from the camcorder to an HDTV, please insert the HDMI cable (Optional) to the HDMI interface of the camcorder. Connect the other terminal of the HDMI cable
ページ14に含まれる内容の要旨
3 Deleting files When in standby or playback mode, press the Delete key to enter the Delete menu mode. Use the direction keys to select “Delete current” or “Delete all”. Selecting “Delete current” then pressing the Shutter/OK key will delete current image; Selecting “Delete all” then pressing the Shutter/OK key will delete all images. Press the Delete key to exit the Delete mode. 4 Connect to PC 1. Slide the USB Switch UP to extend the USB connector then turn the camcorder ON. 2. I
ページ15に含まれる内容の要旨
2. You can use ArcSoft MediaImpression to edit videos. 3. ArcSoft MediaImpression can be installed from CD included with your camcorder. ▲ Open USB port ▲Connect camera to PC (1) ▲ Connect camera to PC (2) 13
ページ16に含まれる内容の要旨
Using ArcSoft MediaImpression There are two pieces of software in CD provided for image processing: The Xvid codec and ArcSoft MediaImpression Software installation Put the CD included with the camcorder into the CD-ROM of the computer. The following menu will appear: 14
ページ17に含まれる内容の要旨
If the CD driver does not automatically load, click the autorun.exe program in the root directory of the CD. Xvid Codec Installation Click the “Install Xvid Codec” button and complete the installation per the following instructions. 15
ページ18に含まれる内容の要旨
16
ページ19に含まれる内容の要旨
Notice: This software is found on the CD included with your camcorder. If you want to play video you have recorded on your computer, please install Xvid codec. If your computer has a previous installation of an Xvid codec, the installation of this codec may fail. 17
ページ20に含まれる内容の要旨
MediaImpression Installation and Use Click “Install MediaImpression” button and complete the installation per the following instructions. 18
