ページ1に含まれる内容の要旨
C3-RS-665-2W
PROFESSIONAL TWO WAY REMOTE CAR
STARTER
&
3 CHANNEL SECURITY SYSTEM
OPERATIONS MANUAL
Compatible
Please register your product at:
www.autopageusa.com
THIS PRODUCT IS DESIGNED FOR PROFESIONAL INSTALLATION ONLY
1
ページ2に含まれる内容の要旨
SYSTEM OPERATIONS: WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3. Alert servicing personnel that the vehicle can be started automatically. 4. Do not start the vehicle by remote while it’s in an enclosed area or garage. 5. Always apply the parking brake and lock th
ページ3に含まれる内容の要旨
Switching code For 2nd Car For regular remote transmitter Only II Operation. XT-43 LCD TRANSMITTER OPERATION: LCD REMOTE CONTROL TRANSMITTER: Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or such obstacles like tall buildings and so on, the transmission range may get shorter as the system uses low output powered frequency. BATTERY REPLACEMENT: A 1.5V type AAA Alkali
ページ4に含まれる内容の要旨
times when the battery compartment is empty, and then insert the new battery. THE REMOTE LCD ICONS WITH FUNCTION: Door Lock Door Unlock Your vehicle Your vehicle doors are doors are unlocked locked. Start Mode Valet Mode Your vehicle is running All the function shall be temporarily on hold. Remote Transmission In – Range Indicator You are transmitting the You are within the remote signal to control unit control range. Low Battery Trunk Release Trunk
ページ5に含まれる内容の要旨
one long beep is heard. LCD Programming has now been entered. Transceiver Button System Function Remark Switching code for 2nd / 1st Press within 5 Program Mode - Car Operation seconds Melody / Vibration Mode Press within 5 Program Mode - seconds Power Save Mode Press within 5 Program Mode - seconds LCD screen lamp turns on for 5 seconds. Clear the Flash Icon and Press within 3 - + Melody Sound seconds ACTIVE LOCK: 1. Press button on the transmitter. 2. The Siren
ページ6に含まれる内容の要旨
1. Press and hold all four remote control buttons simultaneously unit one long beep is heard. LCD Programming has now been entered. 2. Within 5 seconds press and hold button until two beeping sounds are heard and the “II” icon will display on the LCD screen to indicate the second transceiver pin code has been initiated. 3. To exit programming mode, take no action for five seconds. The remote control will generate two long beeps to indicate programming mode has been exited. Back
ページ7に含まれる内容の要旨
exited. Power Save Mode: While in the power save mode, the LCD remote transceiver will “sleep” until a button is pushed. This will extend the life of battery. When power save mode is “ON”, the remote control will wake up periodically to check for messages from the security module. 1. Press and hold all four remote control buttons simultaneously unit one long beep is heard. Programming has now been entered. 2. Within 5 seconds, press the button to toggle “On” or “Off”. The remot
ページ8に含まれる内容の要旨
While triggering the alarm the LCD screen will alert the user through melody sound and flashing trigger icon. Press any button on the LCD remote transmitter to stop the melody sound. PANIC FUNCTION: (IF SIREN or HORN IS INSTALLED) The transmitter can be used as a remote panic switch to manually trigger the vehicle’s horn in case of emergency. 1.Press and hold the button for 3 second. The siren will immediately sound. 2.During panic mode, the normal function of this transmitter butt
ページ9に含まれる内容の要旨
Note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down. TEMPORARY STOP FEATURE: This feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the engine running and the climate control on. 1. Before turning off the engine, press the button once on the transmitter. The parkin
ページ10に含まれる内容の要旨
SILENT ARMING / DISARMING: Pressing the + buttons together on the transmitter will arm or disarm your system, No chirp sound will be heard, arm / disarm confirmation will be through the vehicles parking lights only. DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Press the button once: The siren chirps once, The system is armed. Press the button a second time within 5 second
ページ11に含まれる内容の要旨
return to normal status. ACTIVE UNLOCK & DISARMING: 1. Press button on the transmitter. 2. The siren will chirp twice and parking light will flash twice to indicating that the security system is now disarmed. The vehicle doors will unlock and dome lights will turn on for 30 seconds. TAMPER DISARMING: If the alarm was triggered in your absence, upon disarming the system, the siren will chirp 4 times, the parking lights will flash 3 times. PATHWAY ILLUMINATION This feature turn
ページ12に含まれる内容の要旨
PARKING LIGHTS: Siren / Horn Parking Light LED Doors Starter Dome Light 1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disable Turns on for 2. Disarming 2 or 4 Chirps 2 or 3 Flashes Unlocking 30 -second 3. Trigger Alarming Flashes Slow Flash Disable Flashes 4. Panic Alarming Flashes Flashes 5. Car Locator 6 Chirps 12 Flashes Locking AUTOMATIC RE-ARM If this feature is selected, the security system will automatically re-arm itself 60 seconds after disarming with rem
ページ13に含まれる内容の要旨
indicating the system has exited the valet mode. PANIC FUNCTION: The transmitter can be used as a remote panic switch to manually trigger the vehicle’s siren / horn in case of emergency. 1.Press and hold the button for 3 second. The siren / horn will immediately sound. 2.During panic mode, the normal function of this transmitter button will be suspended. The and buttons can be used to lock and unlock the doors (if the option is installed), however once the button is pressed,
ページ14に含まれる内容の要旨
is turned “ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”. TRUNK RELEASE Press and hold the button on transmitter for two seconds to remote control the trunk release or other electric devices. CAR LOCATOR Press the button once with armed mode to active car locator function. The horn will chirp 6 times. The parking light will flash 12 times, for you to easily locate your car. REMOTE START OPERATION: WARNINGS: As with any product that performs au
ページ15に含まれる内容の要旨
(SAFETY START OPERATION:) The safety start feature allows you to press the button Twice before the vehicle will remote start or remote shut down. NOTE: The Remote Start Unit will not start the vehicle if any one of the following conditions exists: 1. The hood is opened. 2. The brake pedal is pressed. 3. Move the optional remote start enable toggle switch to OFF position. (If installed) 4. The gear selector is in any gear other then “PARK” or “NEUTRAL” TO TURN OFF THE REMOTE ST
ページ16に含まれる内容の要旨
IMPORTANT: Timer Start should be used only in open areas, Never start and run the vehicle in on enclosed space as a garage or carport. 3 hours timer start: This feature is design for an extreme cold climate usage. The system will auto start the vehicle every 3 hours, to prevent engine freezing and hard to start. A MAXIMUM OF SIX CYCLES CAN OCCUR. ENTER: 1. Press the button once to remote start the vehicle. As soon as the vehicle is running and the parking lights have turned ‘ON’.
ページ17に含まれる内容の要旨
LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. ,Continental U.S. and Canada Only) 1. Auto Page, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery. Your Auto Page equipment is guaranteed for “life” to the original purchaser/user of the equipment and the original vehicle in which it was installed by an authorized installer under the following conditions: If the product proves defective (according to Auto Page's testing) within the firs
ページ18に含まれる内容の要旨
8. Auto Page shall not be liable, under the foregoing WARRANTIES or otherwise, for: Any personal injury of any kind to the purchaser, its employees or agents or anyone else whomsoever resulting directly or indirectly from the use or presence of the equipment or parts; Consequential damages of any kind; any inability of the purchaser to use the equipment. **IMPORTANT NOTE: Any damages to the Auto Page system resulting from an installation performed by anyone other than a professional
ページ19に含まれる内容の要旨
serious threat to human health and water resources.“Perchlorate Material – Special handling may apply.”For more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ 19
ページ20に含まれる内容の要旨
960 Knox Street Unit B, Torrance, CA 90502 Tel: (310) 323-1800 or (800) 262-2527 www.autopageusa.com 20
