ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 1.0 February 27, 2012 • Initial release for Revision A1 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned here
ページ3に含まれる内容の要旨
Table of Contents Table of Contents Preface..................................................................................i PPPoE (DSL) ......................................................................31 Manual Revisions ........................................................................... i PPTP ....................................................................................33 Trademarks ...................................................................................... i L
ページ4に含まれる内容の要旨
Table of Contents Port Forwarding .............................................................72 Statistics ......................................................................... 102 Application Rules ...........................................................73 Internet Sessions ......................................................... 103 QoS Engine .......................................................................74 Routing ............................................................
ページ5に含まれる内容の要旨
Table of Contents Technical.Specifications.................................................135 Contacting.Technical.Support.......................................136 GPL.Code.Statement......................................................137 Warranty..........................................................................149 Registration....................................................................156 D-Link DIR-826L User Manual iv
ページ6に含まれる内容の要旨
Section 1 - Product Overview Product Overview Package Contents DIR-826L Wireless N 600 Dual Band Gigabit Cloud Router Ethernet Cable Power Adapter If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-826L will cause damage and void the warranty for this product. D-Link DIR-826L User Manual 1
ページ7に含まれる内容の要旨
Section 1 - Product Overview System Requirements • An Ethernet-based Cable or DSL modem Network.Requirements • IEEE 802.11n or 802.11g wireless clients • 10/100/1000 Ethernet Computer.with.the.following: • Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapter Browser.Requirements: Web-based.Configuration. • Internet Explorer 7 or higher Utility.Requirements • Firefox 3.5 or higher • Safari 4 or higher • Chrome 8 or higher ® Windows .Users: Make sure you have the l
ページ8に含まれる内容の要旨
Section 1 - Product Overview Introduction The D-Link Wireless N 600 Dual Band Gigabit Cloud Router (DIR-826L) comes equipped with 4 Gigabit ports to provide speeds up to 10x faster than standard 10/100 ports. It also uses 802.11n technology with multiple intelligent antennas to maximize the speed and range of your wireless signal to significantly outperform 802.11g devices. With the addition of Intelligent Quality of Service (QoS), data streams are separated which helps organize and prioritiz
ページ9に含まれる内容の要旨
Section 1 - Product Overview Features •.Faster.Wireless.Networking - The DIR-826L provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. The performance of this 802.11n wireless router gives you the freedom of wireless networking at speeds 14x faster than 802.11g. •.Compatible.with.802.11a/g.Devices - The DIR-826L is still fully com
ページ10に含まれる内容の要旨
Section 1 - Product Overview Hardware Overview Connections 1 2 3 4 5 6 1 USB Port Connect a USB flash drive to share content throughout your network. 2 WPS Button Press to start the WPS process. The Internet LED will start to blink. 3 LAN Ports (1-4) Connect 10/100/1000 Ethernet devices such as computers, switches, storage (NAS) devices and game consoles. 4 Internet Port Using an Ethernet cable, connect your broadband modem to this port. 5 Power Button Press the power button to power on and off.
ページ11に含まれる内容の要旨
Section 1 - Product Overview Hardware Overview LEDs 1 2 A solid green light indicates a proper connection to the power supply. The light will blink green during 1 Power LED the WPS process. The light will blink orange during boot up. A solid light indicates connection on the Internet port. If the LED is orange, the connection is good but 2 Internet LED the router cannot connect to the Internet. D-Link DIR-826L User Manual 6
ページ12に含まれる内容の要旨
Section 2 - Installation Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Before you Begin • Please configure the router with the computer that was last connected directly to your modem. • You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off your
ページ13に含まれる内容の要旨
Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your ho
ページ14に含まれる内容の要旨
Section 2 - Installation Manual Setup 1. Turn off and unplug your cable or DSL broadband modem. This is required. Modem 2. Position your router close to your modem and a computer. Place the router in an open area of your intended work area for better wireless coverage. 3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer. Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer. USB
ページ15に含まれる内容の要旨
Section 2 - Installation 4. Plug one end of the included blue Ethernet cable that came with your router into the yellow port labeled INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on your modem. DIR-826L USB Modem WPS 1 2 INTERNET 3 4 Computer INTERNET POWER 5. Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes. 6. Connect the supplied power adapter into the power port on the back of the router and then plug it
ページ16に含まれる内容の要旨
Section 2 - Installation Connect to an Existing Router Note: It is strongly recommended to replace your existing router with the DIR-826L instead of using both. If your modem is a combo router, you may want to contact your ISP or manufacturer’s user guide to put the router into Bridge mode, which will ‘turn off’ the router (NAT) functions. If you are connecting the DIR-826L router to an existing router to use as a wireless access point and/or switch, you will have to do the following to the
ページ17に含まれる内容の要旨
Section 2 - Installation 5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save.Settings to save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the browser and change your computer’s IP settings back to the original values as in Step 1. 6. Disconnect the Ethernet cable from the router and reconnect your computer to your network. 7. Connect an Ethernet cable in one of the LAN ports o
ページ18に含まれる内容の要旨
Section 2 - Installation Configuration There are several different ways you can configure your router to connect to the Internet and connect to your clients: • QRS.Mobile.App.- Use your iPhone, iPad, or iPod Touch to configure your router. Refer to page 21 • D-Link.Setup.Wizard - This wizard will launch when you log into the router for the first time. Refer to page 14. • Manual.Setup - Log into the router and manually configure your router (advanced users only). Refer to page 26. D-Link DIR-826L
ページ19に含まれる内容の要旨
Section 3 - Configuration Quick Setup Wizard If this is your first time installing the router, open your web browser. You will automatically be directed to the Wizard Setup Screen. If you have already configured your settings and you would like to access the configuration utility, please refer to page 26. If this is your first time logging into the router, this wizard will start automatically. This wizard is designed to guide you through a step-by-step process to configure your new D-Link
ページ20に含まれる内容の要旨
Section 3 - Configuration If the router does not detect a valid Ethernet connection from the Internet port, this screen will appear. Connect your broadband modem to the Internet port and then click Try.Again. If the router detects an Ethernet connection but does not detect the type of Internet connection you have, this screen will appear. Click Guide.me. through.the.Internet.Connection.Settings to display a list of connection types to choose from. Select your Internet connection type and cli
