ページ1に含まれる内容の要旨
Quick Installation Guide
TE W-637AP
3.01
ページ2に含まれる内容の要旨
Table of Contents English 1 1. Before You Start 1 2. Hardware Installation 2 Troubleshooting 7 Version 04.19.2011
ページ3に含まれる内容の要旨
1. Before You Start Package Contents Ÿ TEW-637AP Ÿ Multi-Language Quick Installation Guide Ÿ CD-ROM (Utility and User's Guide) Ÿ Power Adapter (12V DC, 0.5A) Ÿ Network Cable (0.6m / 2ft.) System Requirements ŸWeb Browser: Internet Explorer (6 or higher), Firefox 2.0 or higher, Opera, Chrome, Safari ŸA computer with a network adapter or wireless adapter properly installed ŸA router with an available network LAN port ŸAn available DHCP Server – routers usually have a built-in DHCP server 1
ページ4に含まれる内容の要旨
2. Hardware Installation Note: 1. Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. 2. Disable any anti-virus and firewall programs before starting hardware installation. For Windows Users 1. Insert Utility CD-ROM into your computer's CD-ROM drive. 2. Click Run Setup.exe. 3. Click Setup Wizard. 4. Click I accept the terms in the License Agreement and then click Next. 2
ページ5に含まれる内容の要旨
5. Connect the provided network cable from a LAN port on your Router to the LAN port on the TEW-637AP. Then click Next. 6. Connect a RJ-45 cable from a LAN port on your Router to the Ethernet port on your computer. 7. Connect the Power Adapter to the Access Point and then to a power outlet. Verify that the power switch is set to the on position (EU version only). Then click Next. 8. Select the TEW-637AP from the list and then click Configure. 9. Enter a password and then click Login. Th
ページ6に含まれる内容の要旨
10. Select Dynamic IP Address Configuration and then click Next. 11. Select Manual setup and then click Next. 12. Enter a SSID (Wireless Network Name) and then click Next. By default, the SSID is TRENDnet637. The SSID is the wireless network name of your wireless network (e.g. wireless router or access point). Enter a unique SSID. Choose something that you would easily identify when searching for available wireless networks. 13. Select a Security Mode and then click Next 4
ページ7に含まれる内容の要旨
Note: 1. To protect your network from any unauthorized access it is recommended to enable wireless encryption. 2. The example below is for WPA-PSK/WPA2-PSK (AES) security. If you select WPA-PSK or WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If your wireless adapters do not support WPA or WPA2, then select WEP. 3. WEP encryption only supports 802.11b/g speed of up to 54Mbps. 4. Once encryption is enabled on the router, each wireless computer and device must be configu
ページ8に含まれる内容の要旨
17. Click Next to apply the settings. 18. Click Exit. 21. Click Yes to exit. Note: To connect a wireless computer to the TEW-637AP, please refer to the first question in the troubleshooting section. Your Installation is complete For detailed information regarding the TEW-637AP’s configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com. Register Your Product To ensure the highest leve
ページ9に含まれる内容の要旨
Troubleshooting 1. All the settings are correct, but I can not make a wireless connection to the Access Point. 1. Double check that the wireless LED on the Access Point is lit. 2. Power cycle the Access Point. Unplug the power to the Access Point. Wait 15 seconds, then plug the power back in. 3. Contact the manufacturer of your wireless network adapter. Make sure the wireless network adapter is configured with the proper SSID. The default SSID of the Access Point is TRENDnet637. If you
ページ10に含まれる内容の要旨
5. I followed the Quick Installation Guide and setup a new password. When I log in to the browser configuration an access error message appears. What should I do? If the password was changed and you don't remember it, you need to reset the TEW-637AP. To reset the TEW-637AP, power up the unit and wait 30 seconds for the unit to boot up. Then take a pin or paper clip and press the reset button for 15 seconds, then let go. The reset button is located on the bottom of the TEW-637AP. Please
ページ11に含まれる内容の要旨
Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues. The preferred method of securing a
ページ12に含まれる内容の要旨
3. Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall. Dense materials like metal, solid wood, glass or even furniture may block or degrade the signal. 4. Antenna orientation can also have a large impact on your wireless signal. Use the wireless adapter's site survey tool to determine the best antenna orientation for your wireless devices.
ページ13に含まれる内容の要旨
ページ14に含まれる内容の要旨
ページ15に含まれる内容の要旨
Copyright © 2011. All Rights Reserved. TRENDnet.
