ページ1に含まれる内容の要旨
POWERMATIC PM3000 14” Table Saw
POWERMATIC has long enjoyed a reputation for quality,
function and innovation in woodworking machines. The
POWERMATIC PM3000 is our latest high capacity table
saw offering where quality, function and long-term
durability were at the top of the design criteria list.
Incorporating many of the innovative features of our
renowned PM2000 10” saw, the POWERMATIC PM3000
The PM3000 embodies the power, capacity
sets a new standard in the 14” cabinet saw class.
ページ2に含まれる内容の要旨
slopes down to the 4”-diameter external port at the lower rear of the cabinet. This floor configuration does a very good job of directing the dust to the port and keeps the interior of the cabinet surprisingly clean. This standard-diameter port makes connecting your 4” dust collector hose quick and adapter free. The bevel scale on the front of the cabinet has large, easy to read The large cabinet door enhances numerals and an adjustable pointer. We also added a pair of dust collecti
ページ3に含まれる内容の要旨
Table Surface The 26”-wide (left-to-right) by 38”-deep primary cast iron table surface expands to 48”-wide when the included 11”-wide by 38”-deep cast iron extension wings are bolted up. The included extension table expands the total supported area (left) to 81”! We even bevel the back edge of the cast iron table (right) to eliminate the sharp corner A tough, 38” by 33” laminate- other leave that can damage the wood or our fingers. covered extension table is also included with t
ページ4に含まれる内容の要旨
features a pair of spring-loaded balls that prevent vibration, locate the plate in its cavity and prevent movement during use. The accessory zero-clearance insert has adjusting screws that allow precise fitting to the cavity. Power and Control The POWERMATIC PM3000 is available with a 5HP, 1 phase, 230V motor (#1720304K) or with a 7.5HP 3 phase, 230/460V motor (#1720305K, pre-wired 230V). All POWERMATIC motors are high quality, high output and rated using a continuous duty cycle f
ページ5に含まれる内容の要旨
Independent side leaves allow the blade guard to follow the stock being cut closely and leave one side flat on the table when making narrow The high-tech blade guard system features individual side plates (left) that can be rotated cuts. This increases up out of the way individually or together. The entire guard system is modular (right) and can be removed or reconfigured in seconds for changing blades or other operations. safety and enhances dust collection by keeping more of the
ページ6に含まれる内容の要旨
In place of the common laminate-covered wood, the POWERMATIC Accu-Fence has a pair of ¾”-thick HDPE (high density polyethylene) slabs that are both very rigid and have exceptional lubricity properties that allows wood to slide along them easily and predictably. The faces can be adjusted vertically to either ride just above the table or flush with the surface, whichever is safest for the material being cut. Oversized access holes along the underside of the Accu-Fence make reaching the
ページ7に含まれる内容の要旨
The large 12 ¾”-long by 2 ¾”-tall extruded fence can be positioned closer to or farther from the blade by releasing the two finger-operated levers. This allows setting the miter fence at the optimum distance from the blade at all cutting angles for maximum accuracy and safety. Slots in the face and top edge of the miter gauge fence accept hex head fasteners to make attaching your custom auxiliary faces or shop-made jigs easy and very secure. Accessories Throat Inserts In addit
