ページ1に含まれる内容の要旨
USER’S GUIDE
TM
®
Iomega StorCenter ix2 Network Storage (34338) and
®
TRENDnet Wireless Day/Night Pan/Tilt Internet Camera
Server with 2-Way Audio (TV-IP422W)
During November 2008, TRENDnet and Iomega are offering great IP Camera capability with
terrific storage capacity at a substantial discount if purchased together. As such, the purpose of
this paper is to provide insight as to how to use these 2 wonderful products together.
Iomega StorCenter ix2 server
ページ2に含まれる内容の要旨
2) Attach the antenna (TV-IP422W) to the back of the camera. 3) Connect a RJ-45 network cable from a Switch/Router to the Ethernet port of the Internet Camera Server. 4) Connect the AC Power Adapter to the Internet Camera Server and then to a power outlet. 5) Verify the Power and Link LEDs are on at the front of the camera. 6) It is recommended that you configure the Internet Camera from a wired computer. If you would like to use the SecurView software, please refer to the User’s Guide
ページ3に含まれる内容の要旨
Set-Up the Network Storage: 1) Use the included network cable to connect the StorCenter device to a network hub or switch (i.e. wireless router) or use the included network cable to the StorCenter device directly to a computer. 2) Connect the included power cord to the back of the StorCenter device and an Uninterruptible Power Supply (UPS). Note: never plug your StorCenter device directly into a wall socket or power strip. Unexpected loss of power may corrupt data or damage the StorCente
ページ4に含まれる内容の要旨
Using TRENDnet IP Camera (IP-TV422W) AND Iomega Network Storage (34338) Together: To use the two devices together, first the user should create a share on the ix2 Network Storage to store images from the IP Camera. This is how that is done: 1. Using the software supplied with Iomega’s StorCenter ix2 Network Storage device, from the Shared Folders tab, click Add (near the bottom of the page) or from the Home tab, click Add Shared Folders. The Add Shared Folder page opens. 2. Type a name
ページ5に含まれる内容の要旨
3. Choose whether to enable security for this shared folder. If you uncheck Enable Security, everyone on the network is granted read/write access to the shared folder without having to enter credentials; you cannot limit or configure individual user access to this shared folder. Anyone with access to the network can open, copy, modify, add, or delete files within the shared folder. If you check Enable Security, the administrator can grant users either Read/Write or Read access to the Share
ページ6に含まれる内容の要旨
8. If the Shared Folder was created successfully, a confirmation page displays. Click OK to return to the Shared Folders page. Then configure the camera to record to the new share on the network storage device. To do this, follow these steps: 1) Using the camera software provided by TRENDnet, click on “SETUP” and then “Event Server” and then “Network Storage” (screen shot below) User’s Guide – Iomega StorCenter ix2 1TB Network Storage and TRENDnet Wireless Day/Night Pan/Tilt Inte
ページ7に含まれる内容の要旨
2) Enter the server address of your StorCenter. (IP address shown) 3) Enter in the Share name. (“Trendnet” shown) 4) Click the “Test” button to test the connection and click “Apply”. (creates a small text file) 5) Next set up the Motion Detection configuration by selecting “Motion Detect”. 6) Lastly, select “Event Config” and then “MotionDetect Trigger”, and select “Record to Network Storage” and “Enable”. (screenshot below) 7) Under the Recording File Path box, click “Browse” 8) Ty
