ページ1に含まれる内容の要旨
Cover Page
TRENDnet User’s Guide
ページ2に含まれる内容の要旨
Table of Contents TRENDnet User’s Guide Video Clip ................................................................................................................ 24 Contents Snapshot ................................................................................................................. 26 SD Management...................................................................................................... 26 Product Overview ..........................................
ページ3に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide Features Product Overview TV-IP572W The Megapixel Wireless N Internet Camera, model TV- IP572W, transmits real-time Megapixel video over the Internet. Wireless n technology provides unsurpassed wireless coverage and improved streaming video quality. Add this camera to your wireless network at the touch of a button with Wi-Fi Protected Setup (WPS). Record 1280 x 800 Megapixel (WXGA) video at up to 30 frames per second (fps).
ページ4に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide Front Panel View Product Hardware Features Rear Panel View Light Sensor IR LED Focus Ring Camera Lens Microphone Power/Link LED Power port Ethernet port IR LED – Built-in 4 IR LED for night vision uses. (For TV-IP572WI) LAN Port– Connect Ethernet cables to your wired network devices. Light Sensor – Detects the light source to turn IR on or off. Power Port – Connect the included power adapter fro
ページ5に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide Side Panel View Side Panel View Reset WPS Line out Mini SD card slot rd Reset Button – Use an item such as a paperclip to push and hold this button for Line out – Use this to plug in a 3 party speaker. 3 seconds and release to reset your camera to its factory defaults. Micro SD slot – Insert a Micro-SD card to store camera video files. WPS (Wi-Fi Protected Setup) – Push and hold this button for 3 seconds to
ページ6に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide Camera Stand Application Diagram Metal Stand- This base allows the camera to stand upright. Adjustable Arm- Screw the arm through the metal stand hole. Use the adjustable screw to turn it up or down. Washer- Place the washer between the camera and the Plastic Bolt Plastic Bolt- Place the plastic bolt after the washer and screw the adjustable arm in place. © Copyright 2013 TRENDnet.
ページ7に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide WPS Connection Installation An alternative method of connecting your camera to your network is by using WPS. WPS Wired Connection is a quick, simple and secure method of adding devices to a network. If you have a 1. Connect the Ethernet Cable router which supports WPS follow the steps below, otherwise, please use the wired If you intend to use the network camera as a wired device, connect one end of mode of setting up the came
ページ8に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide 2. Connect an RJ-45 cable from a switch/router to the Ethernet port on the back Starting the Setup Wizard of the camera and connect the AC power adapter to the camera. Click Next to proceed. Insert the included CD-ROM into your CD/DVD drive. The Install Wizard program will run automatically. Note: If the Install Wizard does not run, you may have autorun disabled on your machine. In this case, browse to the CD drive and run Insta
ページ9に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide 4. Login to your camera by entering the ID and Password. By default, both the ID 6. It is strongly recommended that you change your password to secure the and Password are set to admin. Click Next to continue. camera from being accessed by others. Check the Change Password box and enter the new password in both password fields to confirm the new password. Click Next to continue. 5. Enter a name for the camera in the Camera Name f
ページ10に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide 8. Select whether you want to use the camera over an wireless connection or on a 10. After the Setup Wizard configures the camera, the wizard starts to setup wired connection. Click No, I don’t want to use wireless for the camera. Then process. click Next to continue. (skip to step 12 for wireless configuration) 11. When the Setup Wizard has finished, the configuration is complete and the following screen appears: 9. A su
ページ11に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide 12. When selecting the wireless setup chooses “I want to use wireless for the 13. A summary screen of the settings you have chosen appears. Click Next to camera, click Next to continue. continue. Wireless Connection 14. After the Setup Wizard configures the camera, a screen prompting you for the Find the access point (AP) you wish to connect to from the Available AP drop connection method appears. down menu. In most
ページ12に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide 15. Connecting over wireless When the Setup Wizard has finished, the configuration is complete. If there is a Disconnect the Ethernet cable from the camera and wait for 1 minute for the wireless connection found, the following screen will appear: camera to turn to wireless mode then click Next to continue. When the Setup Wizard has finished, the configuration is complete. If there is no wireless connection found, the fol
ページ13に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide An explanation of Live View Configuration Live view has many options. Let’s take a closer look. After completing the Setup Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure your TV-IP572W or TV-IP572WI camera. Open a web browser such as Internet Explorer® and enter the IP address of your camera. To log in, use the User name admin and t
ページ14に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide Step 1: LAN Settings Setup Wizard This screen provides two connection options: DHCP Connection and Static IP Address. To view the Setup Wizard settings: In DHCP Connection all fields are non-existent cause your router selects an IP address 1. Login to the camera as described in the section Using the web-based for you. Under Static IP address field to enter the IP address details yourself according configuration interface.Click on
ページ15に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide Step 2: Internet Settings Step 3: DDNS Settings This screen provides PPPoE settings and allows the camera to be connected directly to This screen provides DDNS settings. Click the Enable checkbox to setup DDNS. Once you your ADSL modem. Click the Enable checkbox to setup PPPoE. Enter a username and have clicked Enable, select your DDNS Server and enter your Server Address. Enter a password. If your internet connection doesn’t call for
ページ16に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide Step 4: Camera Name Settings Step 5: Time Zone Settings This screen provides Camera Name settings. In the Camera Name field type the name This screen provides Time Zone settings. From the Time Zone drop-down list, select you wish to assign to the camera and click Next to continue. your time zone. Click Enable Daylight Saving if you are going to use that time method and select either Auto Daylight Saving or Set date and time manually.
ページ17に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide Step 6: Setup Complete System This screen provides Configuration Settings. The final screen shows the information you System is divided into two main sections – Admin and Time & Date. The Admin section have just configured. Click Back to make changes, Apply to set the changes and Cancel is where all Device Management configurations are handled. to exit without saving the settings. The camera will gather and rebootthe camera t
ページ18に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide Device Settings: Here you can change the Camera Name, click OSD to enable the Label Name and check Time Stamp to singe times into your images. The LED light has three options from the drop-down list: Power/Link, Off, or Flicker. The options are self- explanatory. Click Save to continue. Add User Account: Here you can add users who want to view images on the W/WI Enter a User Name, Password, and Verify the New Password.Click Add
ページ19に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide Under Time Configuration, select a Time Zone from the drop-down list. Click the Network checkbox next to Enable Daylight Saving to enable this function and choose either Auto This screen shows the LAN Settings. If you didn’t set your LAN settings in the Setup Daylight Saving or Set DST Manually. Click Apply to continue. Wizard, you can set them up here. Under Automatic Time Configuration, click the Synchronize with NTP Server ch
ページ20に含まれる内容の要旨
TV-IP572W / TV-IP572WI TRENDnet User’s Guide Under Port Settings, select the HTTPPort (80 is the default) and also select the RTSPPort(554). Under UPnP, click the UPnP checkbox if you want to enable this function. Click the UPnP Port Forwarding checkbox if you want to enable to set the ports. Select the External HTTP port (the default is set) and select the RTSP port (the default is set at 554). If you are using a MAC check the Bonjour checkbox to enable this
