ページ1に含まれる内容の要旨
VideoJet X10/X20/X40
ページ2に含まれる内容の要旨
EN | 2 Quick Installation Guide | VideoJet X10/X20/X40 Attention You should always make yourself familiar with the required safety measures in the cor- responding chapter of the user's manual (see CD-ROM supplied). You will find more important details on the installation and on the operation of the unit in the manual. These instructions "Quick Installation Guide" only show the basic installation of a VideoJet X10, VideoJet X20 or VideoJet X40, but they are no substitute for the com- plete use
ページ3に含まれる内容の要旨
VideoJet X10/X20/X40 | Quick Installation Guide EN | 3 Contents of Delivery • VideoJet X10, VideoJet X20 or VideoJet X40 Network Video Server Drilling template 4 spring clamps Product CD Quick Installation Guide Bosch Security Systems | 2006-12 | V2.5
ページ4に含まれる内容の要旨
EN | 4 Quick Installation Guide | VideoJet X10/X20/X40 1. Unpack the Box Please check the delivery for completeness and integrity. Have your unit checked by Bosch Security Systems if you detect any damages! Bosch Security Systems | 2006-12 | V2.5
ページ5に含まれる内容の要旨
VideoJet X10/X20/X40 | Quick Installation Guide EN | 5 2. Connect the Camera(s) VideoJet X10: Connect the camera with the Video In socket. VideoJet X20: Connect one camera to each, the Video In 1 socket and the Video In 2 socket. VideoJet X40: Connect one camera to each, the Video In 1 socket to the Video In 4 socket. Bosch Security Systems | 2006-12 | V2.5
ページ6に含まれる内容の要旨
EN | 6 Quick Installation Guide | VideoJet X10/X20/X40 3. Connect the Audio Components Use the Audio In and Audio Out jack sockets for audio line connections. Bosch Security Systems | 2006-12 | V2.5
ページ7に含まれる内容の要旨
VideoJet X10/X20/X40 | Quick Installation Guide EN | 7 4. Connect the Alarm Switches and Relay Connections Connect the alarm switches to the corresponding terminals. Connect the relay connections to the corresponding terminals. Bosch Security Systems | 2006-12 | V2.5
ページ8に含まれる内容の要旨
EN | 8 Quick Installation Guide | VideoJet X10/X20/X40 5. Insert the SFP Module If necessary, insert an SFP module into the SFP socket. Bosch Security Systems | 2006-12 | V2.5
ページ9に含まれる内容の要旨
VideoJet X10/X20/X40 | Quick Installation Guide EN | 9 6. Connect to the Network and Power Supply Connect the unit to the network via the ETH 1 socket. If necessary, set up a redundant network connection or connect an iSCSI RAID system using the ETH 2 socket. Connect the power supply lines to the + and – terminals. Connect the power supply unit to the power outlet. Note: Power supply units are not included in delivery. You can order power supply units in diffe- rent variations at Bosch
ページ10に含まれる内容の要旨
EN | 10 Quick Installation Guide | VideoJet X10/X20/X40 7. Configure the IP Address Install the program Configuration Manager from the CD-ROM provided. If the CD-ROM does not start automatically doubleclick the index.htm file. Start the Configuration Manager when installation is completed. The network is scanned for compatible devices automatically. When a VideoJet X is listed, click the entry and click the tab Network, located in the right frame. Enter the desired IP address (e.g. 192
ページ11に含まれる内容の要旨
VideoJet X10/X20/X40 | Quick Installation Guide EN | 11 8. Test the Configuration Launch the Web browser and enter the IP address of the unit (e.g. http://192.168.0.40) to check that the unit is properly connected to the network. Note: Set the graphics card of the computer to 16-bit or 32-bit color depth. Otherwise the com- puter cannot display the video images. Use the links at the top of the Web pages to navigate. Bosch Security Systems | 2006-12 | V2.5
ページ12に含まれる内容の要旨
Bosch Sicherheitssysteme GmbH Bosch Security Systems B.V. Robert-Koch-Straße 100 P.O. Box 80002 85521 Ottobrunn 5600 JB Eindhoven Germany The Netherlands www.bosch-sicherheitssysteme.de www.boschsecuritysystems.com © 2006 Bosch Sicherheitssysteme GmbH Subject to change. F.01U.033.683/1206/QIG_en/1
