ページ1に含まれる内容の要旨
Cover Page
TRENDnet User’s Guide
ページ2に含まれる内容の要旨
Table of Contents TRENDnet User’s Guide User ......................................................................................................................... 18 Contents Date/Time ............................................................................................................... 18 Motion Detection .................................................................................................... 18 Product Overview .....................................
ページ3に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide Features Product Overview TV-IP651W The Wireless N PTZ Internet Camera, model TV- IP651W, provides security over a large area. Pan the camera side-to-side a remarkable 340 degrees and tilt up-and-down 115 degrees from any Internet connection. Wireless n technology provides unsurpassed wireless coverage and improved streaming video quality. Add this camera to your wireless network at the touch of a button with Wi-Fi Protected
ページ4に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide Front Panel View Product Hardware Features Rear Panel View Light Sensor IR LED Camera Lens Focus Ring Antenna WPS button LAN port Power/Link LED Privacy button Reset button Microphone Power port IR LED – Built-in 4 IR LED for night vision uses. (for TV-IP651WI) LAN Port – Connect Ethernet cables to your wired network devices. Light Sensor – Detects the light source to turn IR on or off.
ページ5に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide © Copyright 2012 TRENDnet. All Rights Reserved. 3
ページ6に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide WPS Connection Installation An alternative method of connecting your camera to your network is by using WPS. WPS Wired Connection is a quick, simple and secure method of adding devices to a network. If you have a 1. Connect the Ethernet Cable router which supports WPS follow the steps below, otherwise, please use the wired If you intend to use the network camera as a wired device, connect one end of mode of setting up the c
ページ7に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide Wall mount installation To attach the metal plates carry out the following: Remove the two rubber pads under the base of the Camera. Slide the metal plate onto the base of the camera, making sure that the two holes on the base of the camera align with the two screw holes on the base of the camera. Secure the metal plate to the base of the Camera with the two screws provided. The camera can now be mounted to the ceil
ページ8に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide 2. Connect an RJ-45 cable from a switch/router to the Ethernet port on the back Starting the Setup Wizard of the camera and connect the AC power adapter to the camera. Click Next to proceed. Insert the included CD-ROM into your CD/DVD drive. The Install Wizard program will run automatically. Note: If the Install Wizard does not run, you may have autorun disabled on your machine. In this case, browse to the CD drive and run Ins
ページ9に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide 4. Login to your camera by entering the ID and Password. By default, both the ID 6. It is strongly recommended that you change your password to secure the and Password are set to admin. Click Next to continue. camera from being accessed by others. Check the Change Password box and enter the new password in both password fields to confirm the new password. Click Next to continue. 5. Enter a name for the camera in the Camera Name
ページ10に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide 8. Select whether you want to use the camera over an wireless connection or on a 10. After the Setup Wizard configures the camera, the wizard starts to setup wired connection. Click No, I don’t want to use wireless for the camera. Then process. click Next to continue. (skip to step 12 for wireless configuration) 11. When the Setup Wizard has finished, the configuration is complete and the following screen appears: 9. A s
ページ11に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide 12. When selecting the wireless setup choose “I want to use wireless for the 13. A summary screen of the settings you have chosen appears. Click Next to camera, click Next to continue. continue. Wireless Connection 14. After the Setup Wizard configures the camera, a screen prompting you for the Find the access point (AP) or wireless router you wish to connect to from the connection method appears. Available AP drop down
ページ12に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide 15. Connecting over wireless When the Setup Wizard has finished, the configuration is complete. If there is a Disconnect the Ethernet cable from the camera and wait for 1 minute for the wireless connection found, the following screen will appear: camera to turn to wireless mode then click Next to continue. When the Setup Wizard has finished, the configuration is complete. If there is no wireless connection found, the
ページ13に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide Configuration Viewing Video After completing the Setup Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure Click VIEW VIDEO | ACTIVEX or VIEW VIDEO | JAVA to begin viewing live video from your TV-IP651W or TV-IP651WI camera. Open a web browser such as Internet Explorer® your camera. and enter the IP address of your camera. To log i
ページ14に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide VIEW VIDEO | JAVA Viewing Camera Settings Please make sure that you have the latest version of Java installed on your machine to ensure proper operation when viewing video in Java mode. The Java application can be To view camera settings: downloaded from Sun’s website free of charge (http://www.java.com) 1. Login to the camera 2. Click ADMINISTRATION. The system status screen appears. From the menu on the left side of the s
ページ15に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide System Audio This screen shows the Camera Name, Location, Model, Firmware Version, MAC Address, This screen shows whether audio is enabled and the volume level of the audio. IP Address, Ethernet Link Status, Speed and Duplex type. Wireless Video This screen shows the connection mode, link status, SSID name, channel and encryption This screen shows the details of the video capture settings including Video Resolution, status.
ページ16に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide Network Configuring Camera Settings This screen shows various network statistics related to your camera including IP Address, Subnet Mask and Default Gateway. The TV-IP651W/TV-IP651WI allows you to make configuration changes from anywhere by connecting to the camera using a standard web browser. To configure camera settings: 1. Login to the camera as described in the section Using the web-based configuration interface. 2. Cli
ページ17に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide Privacy button: When privacy feature is enabled, you can turn on and off the Light Frequency: Select the correct frequency (50Hz/60Hz) to reduce the privacy mode by pressing the Privacy button for 5 seconds. When privacy amount of flicker. feature is disabled, the privacy button will not take action. Mirror: Choose whether to mirror the image horizontally or vertically. Anti-Flicker: Check the box to enable anti-flicker.
ページ18に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide applicable as you have specified on the access point. If you intend to use Ad- Hoc mode, you can specify here the encryption type and preshared key that you want to use to connect from the PC. Wireless Connection Mode: Infrastructure is a wireless connection using an access point as a transmission point of all wireless devices. Ad-Hoc is a wireless connection used without an access point, where your TV-IP651W or TV-I
ページ19に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide Network IP Address Mode: Choose a method to assign an IP address to your camera. o Fixed IP – If you want to assign a static or fixed IP address to the camera, you may do so here. Your network administrator should be able to provide you with the necessary details to complete this section. o Dynamic IP (DHCP) – Allows a DHCP server to automatically assign the camera a network address. o PPPoE – If you are using a PPPoE connecti
ページ20に含まれる内容の要旨
TV-IP651W / TV-IP651WI TRENDnet User’s Guide User Date/Time User Access Control: Enable this to allow user accounts to connect to the Synchronized with Time Server: If you have an internet time server or have an camera. This option also enable/disable the authentication for direct view. NTP server designated on your network, you can specify the IP address of it For Java mode: http://camera_ip_address/tvjview.htm here. Ensure that you select the correct time zone for the cam
