ページ1に含まれる内容の要旨
™
Sun Fire V440 Server
Installation Guide
Sun Microsystems, Inc.
4150 Network Circle
Santa Clara, CA 95054 U.S.A.
650-960-1300
Part No. 816-7727-10
July 2003, Revision A
Submit comments about this document at: http://www.sun.com/hwdocs/feedback
ページ2に含まれる内容の要旨
Copyright 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Sun Microsystems, Inc. has intellectual property rights relating to technology embodied in the product that is described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the U.S. patents listed at http://www.sun.com/patents and one or more additional patents or pending patent applications in the U.S. and in ot
ページ3に含まれる内容の要旨
Contents Preface v 1. Preparing for Installation 1 About the Parts Shipped to You 1 Verify All Parts 2 Transfer Online Documentation 3 Plan the Installation 3 What Next 4 2. Installing a Sun Fire V440 Server Into a 4-Post Cabinet 5 Checklist of 4-Post Rackmounting Tasks 6 Inventory for 4-Post Rackmounting 7 Tools Required for Rackmounting 8 Attach the Inner Glides to the Chassis 9 Prepare the Cabinet 10 Locate the Mounting Holes 11 Install the Slide Assemblies 13 Install the Server Into the Cabi
ページ4に含まれる内容の要旨
Secure the Cords and Cables to the Cable Management Arm 25 Install Optional Components 28 Connecting the Cords and Cables 29 Connect the Power Cords to the Server 30 Connect Twisted-Pair Ethernet Cables 32 Restore the Cabinet 34 What Next 34 3. Setup and Power-On Procedures 35 Set Up a System Console Device 35 About Connecting the Server to a Terminal Server 36 How to Access the System Console via a Terminal Server 38 How to Access the System Console via an Alphanumeric Terminal 38 How to
ページ5に含まれる内容の要旨
Preface The Sun Fire V440 Server Installation Guide provides instructions, some background information, and reference material to help you install a new Sun Fire™ V440 server. Instructions in Chapters 1 and 3 assume that a system administrator who is ™ experienced with the Solaris operating environment is performing the installation. However, you do not need Solaris operating environment experience to follow instructions in Chapter 2, which detail the installation of the Sun Fire V440 server int
ページ6に含まれる内容の要旨
Using UNIX Commands ® This document might not contain information on basic UNIX commands and procedures such as shutting down the system, booting the system, and configuring devices. See one or more of the following for this information: Solaris Handbook for Sun Peripherals ™ AnswerBook2 online documentation for the Solaris operating environment Other software documentation that you received with your system Typographic Conventions * Typeface Meaning Examples AaBbCc123 The names of command
ページ7に含まれる内容の要旨
System Prompts Type of Prompt Prompt C shell machine-name% C shell superuser machine-name# Bourne shell and Korn shell $ Bourne shell and Korn shell superuser # ALOM system controller sc> OpenBoot firmware ok OpenBoot Diagnostics obdiag> Related Documentation Application Title Part Number Late-breaking product Sun Fire V440 Server Product Notes 816-7733 information Cabling and power-on Sun Fire V440 Server Setup: 816-7734 overview Cabling and Power-On Administration Sun Fire V440 Server Administ
ページ8に含まれる内容の要旨
Accessing Sun Documentation You can view, print, or purchase a broad selection of Sun documentation, including localized versions, at: http://www.sun.com/documentation Note – For important safety, compliance, and conformity information regarding the Sun Fire V440 server, see the Sun Fire V440 Server Safety and Compliance Guide, part number 816-7731, on the Documentation CD or online at the above location. Contacting Sun Technical Support If you have technical questions about this product that ar
ページ9に含まれる内容の要旨
CHAPTER 1 Preparing for Installation This chapter includes a description of the components of the Sun Fire V440 server, a list of documents on the Documentation CD, and a set of questions that the system administrator must answer before installing the server software. This chapter contains the following sections: “About the Parts Shipped to You” on page 1 “Verify All Parts” on page 2 “Transfer Online Documentation” on page 3 “Plan the Installation” on page 3 About the Parts Shipped to Yo
ページ10に含まれる内容の要旨
RRaacckk AAlliiggnnmmttee nneeTTmmppllaaeett Us Use e this side f this side for or 4 post 4 post r rack installa ack installa tion tion Mounti ng Hole Verify All Parts Verify that you have received all the parts of your system. See the illustration below to identify most of the parts shipped with the system. (Not shown in the illustration is the RJ-45/DB-9 adapter, which is also shipped with the system.) Ship kit carton Documentation CD Ship Kit Grounding strap System keys Cable management
ページ11に含まれる内容の要旨
Transfer Online Documentation The Sun Fire V440 Server Documentation CD is included in the ship kit. See the booklet included with the CD for instructions on transferring the documentation to disk or viewing the documentation directly from the CD. In addition to this guide, the following documents are included on the Sun Fire V440 Server Documentation CD: Sun Fire V440 Server Safety Information Sun Fire V440 Server Product Notes Sun Fire V440 Server Using Online Documentation Sun Fire V4
ページ12に含まれる内容の要旨
Note – Be sure to use a supported version of the Solaris operating environment. See the Sun Fire V440 Server Product Notes for more information. What Next Install the server into a cabinet, following instructions in Chapter 2. 4 Sun Fire V440 Server Installation Guide • July 2003
ページ13に含まれる内容の要旨
CHAPTER 2 Installing a Sun Fire V440 Server Into a 4-Post Cabinet This chapter shows you how to install a Sun Fire V440 server into a 4-post Sun™ StorEdge Expansion Cabinet or other Electronic Industries Association (EIA)-compliant 19-inch (48.26-cm) wide rack. If you are installing a Sun Fire V440 server into a 2-post rack, refer to the 2-post rackmounting instructions that are included on the Documentation CD in the Ship kit. Note – To install a server into an EIA-compliant 19-inch wide rack w
ページ14に含まれる内容の要旨
“Secure the Cords and Cables to the Cable Management Arm” on page 25 “Install Optional Components” on page 28 “Connecting the Cords and Cables” on page 29 “Connect the Power Cords to the Server” on page 30 “Connect Twisted-Pair Ethernet Cables” on page 32 “Restore the Cabinet” on page 34 For a detailed list of 4-post cabinet requirements, turn to the section, “4-Post Cabinet Requirements” on page 52. Checklist of 4-Post Rackmounting Tasks Step Task Refer to This Section 1 Install the
ページ15に含まれる内容の要旨
Rack Alignmte neTmplaet Inventory for 4-Post Rackmounting You need one 4-post rackmounting kit for each Sun Fire V440 server you intend to install into a cabinet. The 4-post rackmounting kit is included with the server. You also need this document and the Rack Alignment template from the ship kit. Back Inner glides (2) Slide assemblies (2) Front Cable management arm Speed pin Rack M4 screws (8) Alignment M6 screws (12) template M6 washers (12) Documentation CD 10-32 screws (12) (Installation Gui
ページ16に含まれる内容の要旨
The plastic bags of hardware contain screws and nuts that are shown below in actual size. 10-32 8-32 M6 M4 8-32 M6 10-32 Any screws not used for rackmounting are spares. Note – Bar nuts are required (but not included) for non-threaded cabinets. See the instructions provided with your cabinet for more information. Tools Required for Rackmounting Phillips No. 2 screwdriver (Use to tighten 10-32 and M6 screws.) Set of appropriate Allen wrenches to remove the side panels on some cabinets Adjus
ページ17に含まれる内容の要旨
Attach the Inner Glides to the Chassis Attach the inner glides to the chassis using four M4 screws for each inner glide. Position the straight end of each inner glide toward the front of the server. Align the second hole on the inner glide with the first hole on the chassis. M4 Chapter 2 Installing a Sun Fire V440 Server Into a 4-Post Cabinet 9
ページ18に含まれる内容の要旨
Prepare the Cabinet 1. Open and remove, if applicable, the front and back doors of the cabinet. See the instructions provided with your cabinet. 2. Stabilize the cabinet by extending its anti-tip legs or bolting the cabinet securely to the floor. See the instructions provided with your cabinet and read “4-Post Cabinet Requirements” on page 52. The following illustration shows two anti-tip legs. Note that some cabinets have only one such leg. 3. Remove the side panels from the cabinet, if applica
ページ19に含まれる内容の要旨
Locate the Mounting Holes Locate and mark the rack rail holes that you will use to attach each slide assembly. You can either count the holes on the vertical rack rails or use the Rack Alignment template included with your documentation set. Make sure that each slide assembly is installed at the same height front-to-back and side-to-side in the rack. The Rack Alignment template is four rack units (7.00 inch/17.78 cm) tall. You use the Rack Alignment template to ensure that the server is correc
ページ20に含まれる内容の要旨
Rack Alignmte neTmplaet To use the Rack Alignment template, complete these steps: a. Place the Rack Alignment template over the right front vertical rack rail, then move the bottom of the template to the location on the rack rail where the bottom of the server will be located. Retainer screw hole Mounting holes b. Adjust the Rack Alignment template until the mounting holes openings are centered on two holes in the rail and the retainer screw hole is visible. When you do this, the top of the temp
