ページ1に含まれる内容の要旨
Portable 900 MHz Wireless Speaker System
Thank you for purchasing the RCA audio input to RF transmitter for optimum
Portable 900 MHz Wireless Speaker FM deviation adjustment (plug and play,
System. Your system gives you high-quality no user adjustment is required)
stereo sound in the 900 MHz band to
almost anywhere in or around your home. Power/Transmitter Indicator — lights
Your Speaker System's three selectable green when the AC adapter is correctly
channels, PLL (Phase-Locked Loop) plugg
ページ2に含まれる内容の要旨
Getting Started Your package should contain the following items Package Contents Transmitter (1) Speaker (2) AC Adapter for Transmitter (1) AC Adapter for Speaker (2) 1 Dual RCA Male to Dual RCA Male Cable (1) /8-inch Stereo Male to Dual RCA Female Adapter (1) 1 1 3-foot Cable with /8-inch Stereo Male to Dual /8-inch Stereo Female (1) Connecting to AC Power Installing the Transmitter Connect the transmitter to AC power with the supplied 12V, 250mA AC adapter. Plug Choosing a Location the supp
ページ3に含まれる内容の要旨
Connecting to an Audio Source Mode Switch You can connect the transmitter to your For normal stereo use, set STEREO/MONO, audio source's left and right audio output on the back of the transmitter, to STEREO. jacks or its headphone jack. If you are using a monaural system, set STEREO/MONO to MONO. Cautions: Do not connect the transmitter to your audio source's speaker output. Doing so could damage the transmitter and the audio source. If you connected the transmitter to an audio sour
ページ4に含まれる内容の要旨
Installing a Speaker 1. Press the two tabs located on the back Connecting Power of the speaker and open the battery compartment cover. 2. Insert the batteries in the compartment Keyhole Slot according to the polarity symbols (+ and –) marked inside the battery compartment. Battery Compartment Cover Strain Relief Slot 8 D Size Batteries Installing Batteries You can use 16 (8 for each speaker) D size batteries (not supplied) to power the speakers. Batteries are available at your local B
ページ5に含まれる内容の要旨
Connecting AC Power 1. Insert the supplied 12V, 1800mA AC adapter’s barrel plug into the DC 12V jack located at the back of the speaker. 2. Plug the other end of the AC Adapter into an AC wall outlet. 3. Route the adapter’s cord through the strain relief slot on the back of the speaker. Repeat the above steps for the other speaker. Mounting the Speakers To mount a speaker on the wall, you need a screw (not supplied) with a head that fits into the keyhole slot on the back of the speaker.
ページ6に含まれる内容の要旨
Using Your System with Your PC Follow these steps to use your speakers with your computer. 1 1 1. Connect the male end of the supplied cable adapter ( /8-inch stereo male to dual- /8-inch stereo female cable) to your computer’s audio output jack. Connect one of the cable ends 1 to your existing computer speaker plug and connect the other unused /8-inch female 1 cable end to the supplied Y-Adapter ( /8-inch stereo male to Dual-RCA female adapter). 2. Connect one end of the RCA adapter (Dual RC
ページ7に含まれる内容の要旨
Operation 4. Set SPEAKER on the back of each Listening Safety speaker to either L (for the Left stereo speaker) or R (for the Right stereo To protect your hearing, follow these speaker). guidelines when you use the speaker system. 5. Adjust VOLUME and BASS on each Set the volume to the lowest setting speaker between MIN (minimum) to before you begin listening. After you MAX (maximum) to a comfortable begin listening, adjust the volume to a listening level. comfortable level. 6. To tu
ページ8に含まれる内容の要旨
received, including interference that may Care cause undesired operation. Keep the system dry; if it gets wet, wipe it dry immediately. Use and store the system only in normal temperature environments. Handle the system carefully; do not drop it. Keep the system away from dust and dirt, Product: Portable 900 MHz and wipe it with a damp cloth occasionally Wireless Speaker to keep it looking new. System Caution: You might permanently damage Model: 40-5029 your speakers by cleaning them
ページ9に含まれる内容の要旨
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult your local RadioShack store or an experienced radio/TV technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your system. Changes or modifications not expressly approved by RadioShack may cause interference and vo
ページ10に含まれる内容の要旨
Troubleshooting We do not expect you to have problems with your speaker system; however, if you do have problems, try these troubleshooting tips. Problem Solution No sound. Be sure the speakers are turned on. Replace the speakers’ batteries. Be sure the AC adapter is plugged in and has power. Be sure all cables are securely connected. Be sure the audio source is turned on and turned to an active channel. Adjust the speakers’ volume control. Distorted audio. Be sure the speakers and transmitte
ページ11に含まれる内容の要旨
Specifications Transmitter Carrier Frequency ..................................................................................... 911.4–918.4 MHz Power Source ........................... Unregulated 12V DC, Center Tip set to positive (+), 250 mA Use of any other power source may cause damage Modulation Method ...................................................................................... FM Modulation Frequency Response ....................................................................
ページ12に含まれる内容の要旨
Limited Ninety-Day Warranty This product is warranted by RadioShack against manufacturing defects in material and workman- ship under normal use for ninety (90) days from the date of purchase from RadioShack company- owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITT
