PYLE Audio PDSP850の取扱説明書

ページ1に含まれる内容の要旨

Please complete warranty card, detach and return
ThankyouforpurchasingthisPYLE
product. To activate your
warranty registration card
warranty, please mail this card
within 10 days.
PYLE PRO ELECTRONICS
Name
Address
City, State ZIP
Model No. Serial # (if available)
Date of Purchase
Purchased at:
Music Products Store Sound Contractor/Installer Mail Order
Catalog Merchandiser Other
PDSP850 Digital Sampler Processor
Owner’s Manual
www.pyleaudio.com

ページ2に含まれる内容の要旨

Your PYLE PRO series Digital Sampler Processor is Please read this manual throughly before you attempt to set up and use this PDSP850. It contains a rang of created to provide the stereo audiophile with a installation suggestions as well as instructions to sophisticated control center for sampling the sound ensure safe usage. Installed properly, you can expect from multiple input sources and directing the signal years of trouble-free service from this product. toasoundprocessororpoweramplifierfo

ページ3に含まれる内容の要旨

INSTALLATION GUIDELINES 2.Output Connections 4.Strandard AC Power Conneciton USING THE DIGITAL SAMPLING After making all other connections, set the POWER switch to OFF 1.Input Connections Connecting The MIC OUTPUT position. Then connect the power cord to a standard AC outlet. 1.The BANK MODE and MEMORY TIME BANK Connect the MIC INPUT of your mixer or amplifier to MIC OUT The PDSP850 equipped with two options of BANK MODE, 1/2-BANK The PDSP850 accepts a board range of input sources, including: ja

ページ4に含まれる内容の要旨

PDSP850 Specifications 3.The SAMPLER LEVEL control To adjust the level of the sample playback as it enters the mix, Input Sensitivity/Impedance rotate the SAMPLER LEVEL to increase or decrease the level. Mic 1.5mV/600 Ohms Line 150mV/27k Ohms 4.The SAMPLER PAN control Phono 3.0mV/47k Ohms To adjust the balance of the sample playback as it enters the mix, set the control in the center position to playback the sample Output Level evenly through the left and right channel. Turning the SAMPLER PAN c