ページ1に含まれる内容の要旨
Rapier 48w Switch
Removable Fan Installation Guide
AT-FAN04
ページ2に含まれる内容の要旨
Rapier 48w Switch Removable Fan Rapier 48w Switch Removable Fan Installation Guide Document Number 613-000775 REV A © 2007 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. Allied Telesis, Inc. reserves the right to change specifications and other information in this document without prior written notice. The information provided herein is subject to change without notice. In no event shall Allied
ページ3に含まれる内容の要旨
Installation Guide Models Covered by this Guide This document describes how to install the AT-FAN04 fan-only module (FOM) in a Rapier 48w switch. Package Contents The following items are included with each FOM: ■ one Installation Guide ■ one warranty card Installing a Fan-Only Module Before you begin: ■ Read the safety information for the switch. Safety information is available in the Rapier 48w Switch Installation and Safety Guide bundled with every Rapier 48w switch. You can also download th
ページ4に含まれる内容の要旨
Rapier 48w Switch Removable Fan 1. Unpack the fan-only module. Caution Follow correct anti-static procedures when installing a FOM. Failure to do so could damage the FOM or the switch. If you are unsure about correct procedures, contact your authorised distributor or reseller. While observing Electrostatic Discharge (ESD) precautions, remove the FOM from its packing material in an anti-static environment. 2. Remove the current fan-only module from the switch. Using a flat screwdriver, loosen
ページ5に含まれる内容の要旨
Installation Guide 3. Install filters in the replacement fan-only module. Install an air filter in the replacement FOM. Insert the air filter into the narrow slot between the faceplate of the FOM and the fan. Position the air filter with the plastic frame towards the fan, the quadrafoam towards the faceplate, and the flextab to the top. The air filter should fit snugly. 4. Install the replacement fan-only module. Caution Keep the FOM in straight alignment and insert it slowly. Forcing a mis
ページ6に含まれる内容の要旨
Rapier 48w Switch Removable Fan Where to Find More Information For more information about the Rapier 48w switch, see the following documents: ■ The Rapier 48w Switch Installation and Safety Guide describes how to install the Rapier 48w switch and includes statutory and safety information ■ The Rapier Series Switch Hardware Reference, which contains detailed information on the hardware features of all Rapier Series switches ■ The Rapier Series Switch AlliedWare™ Operating System Software Refer
ページ7に含まれる内容の要旨
