ページ1に含まれる内容の要旨
RS900 Series Family of Switches
Installation Guide
www.ruggedcom.com
ページ2に含まれる内容の要旨
Copyright This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of RuggedCom Inc. Disclaimer RuggedCom has checked the contents of this manual against the hardware and software described. However, deviations from the description cannot be completely ruled out. RuggedCom shall not be liable for any errors or omissions contained herein or
ページ3に含まれる内容の要旨
Table of Contents 1 Product Overview ................................................................................................................................................... 6 1.1 Functional Overview ................................................................................................................... 6 1.2 RuggedSwitch .............................................................................................................................. 7 1.3 RuggedWirel
ページ4に含まれる内容の要旨
RS900 Family Installation Guide 7.2 IEEE 1613 Type Tests ............................................................................................................... 42 7.3 IEC Environmental Type Tests.................................................................................................. 42 Page 4 of 42 © 2008 RuggedCom Inc. All rights reserved. Rev100
ページ5に含まれる内容の要旨
RS900 Family Installation Guide Table of Figures Figure 1 - Front Panel Description ........................................................................................................... 13 Figure 2 - Bottom Panel Description......................................................................................................... 14 Figure 3 - DIN Rail Mounting ................................................................................................................... 15 Figure
ページ6に含まれる内容の要旨
RS900 Family Installation Guide 1 Product Overview 1.1 Functional Overview The RS900 family of switches are environmentally hardened, fully managed switches supporting a variety of Ethernet interfaces including copper, fiber, wireless as well as Serial communications. The RS900 family’s superior ruggedized design coupled with the RuggedSwitch Operating System (ROS) provides improved system reliability and advanced networking features making it ideally suited for creating Ethernet netw
ページ7に含まれる内容の要旨
RS900 Family Installation Guide 1.2 RuggedSwitch RS900 9 Port Fiber Optic Ethernet Switch • Up to 9 fast Ethernet ports • Copper and fiber options Page 7 of 42 © 2008 RuggedCom Inc. All rights reserved. Rev100
ページ8に含まれる内容の要旨
RS900 Family Installation Guide 1.3 RuggedWireless Family of Products Wireless Port Characteristics • Configurable as an access, client, or bridge device • IEEE 802.11b/g Wireless Access Point with data rates up to 54 Mbps • WPA (Wi-Fi Protected Access) with TKIP for enhanced security and encryption • WPA2 / 802.11i with CCMP for robust security and encryption • IEEE 802.1X / RADIUS using EAP-PEAP for secure "enterprise class" authentication configuration • Pre-shared Key Mode (PS
ページ9に含まれる内容の要旨
RS900 Family Installation Guide RS920W RS930W Wireless Serial Device Server with 2 Serial Wireless Ethernet with Integrated 6-Port Ports and 1 Ethernet over VDSL Interface Switch and 1 Ethernet over VDSL Interface • 1 Wireless interface • 1 Wireless interface • 1 EoVDSL interface • 1 EoVDSL interface • 2 RS485/RS422/RS232 Serial ports • 6 fast Ethernet ports (DB9 or RJ45); Serial Fiber interface (ST) available Port 9 Antenna #1 Port 7 Ethernet over VDSL Ports 1 & 2 Serial
ページ10に含まれる内容の要旨
RS900 Family Installation Guide 1.4 RuggedVDSL Family of Products EoVDSL Port Characteristics • Symmetric data rates up to 35 Mbps with distances up to 2.5 km • Asymmetric data rates up to 40 Mbps with distances up to 5 km • Automatically selects fastest data rate based on distance and quality of cable • Manual speed configuration available RS900L RS910L Ethernet over VDSL with integrated 8-Port Ethernet over VDSL with 2 Serial and/or 2 Switch Ethernet Ports • 1 EoVDSL int
ページ11に含まれる内容の要旨
RS900 Family Installation Guide RS920L RS930L Dual Ethernet over VDSL interfaces with Dual Ethernet over VDSL interfaces with integrated Dual Port Serial Server Integrated 6-Port Switch • 2 EoVDSL interfaces • 2 EoVDSL interfaces • 2 RS485/RS422/RS232 Serial ports • 6 fast Ethernet ports (DB9 or RJ45); Serial Fiber interface (ST) available Port 9 Ethernet over VDSL Port 3 Ethernet over VDSL Ports 1 & 2 Serial Power & Alarm Page 11 of 42 © 2008 RuggedCom Inc. All r
ページ12に含まれる内容の要旨
RS900 Family Installation Guide 1.5 RuggedServer RS910 2-Port Serial Device Server with up to 3 Ethernet Ports • 2 RS485/RS422/RS232 Serial ports (DB9 or RJ45); Serial Fiber interface (ST) available • Up to 3 fast Ethernet ports • Copper and fiber options Page 12 of 42 © 2008 RuggedCom Inc. All rights reserved. Rev100
ページ13に含まれる内容の要旨
RS900 Family Installation Guide 1.6 Front Panel Description Power, Alarm Port 9 & Reset 10/100Base-TX or 100Base-Fx Ports 3 & 4 10/100Base-TX or 100Base-FX Ports 1-6 10/100Base-TX Figure 1 - Front Panel Description Status LED Colour Activity Comments Power LED Green Solid Power On Alarm LED Red Solid Alarm condition exists Table 1 - Status LEDs Page 13 of 42 © 2008 RuggedCom Inc. All rights reserved. Rev100
ページ14に含まれる内容の要旨
RS900 Family Installation Guide 1.7 Bottom Panel Description Console Port Chassis Ground Power Port Failsafe Relay Optional Din-Rail Mounting Bracket Figure 2 - Bottom Panel Description Page 14 of 42 © 2008 RuggedCom Inc. All rights reserved. Rev100
ページ15に含まれる内容の要旨
RS900 Family Installation Guide 2 Installation 2.1 Din Rail Mounting An optional DIN rail-mounting bracket is available for the unit. The figure below details mounting instructions for the standard 1” DIN Rail. Figure 3 - DIN Rail Mounting Page 15 of 42 © 2008 RuggedCom Inc. All rights reserved. Rev100
ページ16に含まれる内容の要旨
RS900 Family Installation Guide 2.2 Power Supply Wiring and Grounding 2.2.1 AC Power Supply Wiring and Grounding AC Surge Chassis Line/Hot Ground Ground AC Neutral Figure 4 - Power Supply Inputs The AC power supply inputs should be connected as follows: 1. +/L should be connected to AC Line/Hot. 2. -/N should be connected to AC Neutral. 3. Surge Ground should be connected to the Chassis Ground via a braided cable or other appropriate grounding wire. Surge Ground is used as the
ページ17に含まれる内容の要旨
RS900 Family Installation Guide 2.2.2 DC Power Supply Wiring and Grounding Figure 5 - DC Power supply wiring and grounding diagram The low voltage DC power supply features reverse polarity protection and dual independent inputs. The latter feature allows the connection of two DC sources with the same nominal voltage to provide redundant power supply inputs. The DC power supply inputs should be connected as follows: 1. Connect to the DC inputs according to the polarity markings
ページ18に含まれる内容の要旨
RS900 Family Installation Guide 2.2.3 Failsafe Output Wiring The Failsafe output relay is provided to signal critical error conditions that may occur on the unit. The contacts are energized upon power up of the unit and remain energized until an alarm condition or power loss occurs. Figure 6 - Failsafe Output Relay Page 18 of 42 © 2008 RuggedCom Inc. All rights reserved. Rev100
ページ19に含まれる内容の要旨
RS900 Family Installation Guide 2.2.4 Dielectric Strength Testing Units which are to have dielectric strength testing (HIPOT testing) done in the field must have the braided ground cable disconnected during the test. This is required in order to prevent the surge suppression circuitry, which is connected to surge ground, from being activated. Figure 7 - Dielectric Strength Testing Page 19 of 42 © 2008 RuggedCom Inc. All rights reserved. Rev100
ページ20に含まれる内容の要旨
RS900 Family Installation Guide 2.3 RS232 Console Port Wiring The RS232 port is used for configuring the unit. A straight-through serial cable with a DB-9 connector is required. There is no need to crossover the Transmit and Receive signals from the PC side since this has been done internally. Figure 8 - RS232 Female DCE pin-out Pin Signal 1 No Connection 2 Transmit Data 3 Receive Data 4 No Connection 5 Ground 6 No Connection 7 No Connection 8 No Connection 9 No Connect
