Shure DRS-10の取扱説明書

ページ1に含まれる内容の要旨

C S 12 3
C S 12 3
1
2
Shure Incorporated
222 Hartrey Avenue
Evanston IL 60202-3696 U.S.A.
Model DRS-10 User Guide
HARDWARE ADAPTER
SWITCH ASSEMBLY
BACK PANEL
10-POSITION SWITCH ASSEMBLY WIRING DIAGRAM
FIGURE 1
USING CUSTOM SWITCHES
The DRS-10 hardware adapter can be used with a custom-
built switch. Refer to Table 1 for the resistor values needed
GENERAL
in the switch to access the desired scenes.
The Shure DRS-10 is a digital switching system that
TABLE 1
provides remote scene selection when

ページ2に含まれる内容の要旨

CONNECTING THE HARDWARE ADAPTER SPECIFICATIONS TO THE DFR11EQ Connectors Once the switch assembly and hardware adapter are DFR11EQ connection: Male 9-pin D sub-connector connected, plug the hardware adapter of the DRS-10 into Cable connection: Screw terminals the RS232 port of the DFR11EQ (see Figure 3). Case DFR11EQ BACK PANEL Plastic housing Dimensions Hardware Adapter: 6.3 cm L x 3.3 cm W x 1.6 cm H (2.5 in. L x 1.3 in. W x .65 in. H)