ページ1に含まれる内容の要旨
TL-SG3216/TL-SG3424
JetStream L2 Lite Managed Switch
Rev: 1.0.2
1910010512
ページ2に含まれる内容の要旨
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2011 TP-LINK TECHNOLOGIES CO.,
ページ3に含まれる内容の要旨
CONTENTS Package Contents ..........................................................................................................................1 Chapter 1 About this Guide...........................................................................................................2 1.1 Intended Readers .........................................................................................................2 1.2 Conventions..................................................................
ページ4に含まれる内容の要旨
5.1.2 Port Mirror........................................................................................................30 5.1.3 Port Security ....................................................................................................32 5.2 LAG ............................................................................................................................33 5.2.1 LAG Table .................................................................................................
ページ5に含まれる内容の要旨
7.4.1 Port Protect......................................................................................................83 7.4.2 TC Protect........................................................................................................86 7.5 Application Example for STP Function .......................................................................86 Chapter 8 Multicast...................................................................................................................
ページ6に含まれる内容の要旨
10.2.3 MAC ACL .......................................................................................................126 10.2.4 Standard-IP ACL ............................................................................................127 10.2.5 Extend-IP ACL ...............................................................................................127 10.3 Policy Config.............................................................................................................129 10
ページ7に含まれる内容の要旨
12.3.2 Event Config ..................................................................................................176 12.3.3 Alarm Config ..................................................................................................177 Chapter 13 Cluster......................................................................................................................180 13.1 NDP.......................................................................................................
ページ8に含まれる内容の要旨
Package Contents The following items should be found in your box: One JetStream L2 Lite Managed Switch One power cord One console cable Two mounting brackets and other fittings Installation Guide Resource CD for TL-SG3216/TL-SG3424 Switch, including: • This User Guide • Other Helpful Information Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor. 1
ページ9に含まれる内容の要旨
Chapter 1 About this Guide This User Guide contains information for setup and management of TL-SG3216/TL-SG3424 JetStream L2 Lite Managed Switch. Please read this guide carefully before operation. 1.1 Intended Readers This Guide is intended for network managers familiar with IT concepts and network terminologies. 1.2 Conventions In this Guide the following conventions are used: The switch or TL-SG3216/TL-SG3424 mentioned in this Guide stands for TL-SG3216/TL-SG3424 JetStream L2 Lite M
ページ10に含まれる内容の要旨
Chapter Introduction Chapter 4 System This module is used to configure system properties of the switch. Here mainly introduces: System Info: Configure the description, system time and network parameters of the switch. User Manage: Configure the user name and password for users to log on to the Web management page with a certain access level. System Tools: Manage the configuration file of the switch. Access Security: Provide different security measures for the login to enhance the
ページ11に含まれる内容の要旨
Chapter Introduction Chapter 9 QoS This module is used to configure QoS function to provide different quality of service for various network applications and requirements. Here mainly introduces: DiffServ: Configure priorities, port priority, 802.1P priority and DSCP priority. Bandwidth Control: Configure rate limit feature to control the traffic rate on each port; configure storm control feature to filter broadcast, multicast and UL frame in the network. Voice VLAN: Configure voic
ページ12に含まれる内容の要旨
Chapter Introduction Chapter 14 Maintenance This module is used to assemble the commonly used system tools to manage the switch. Here mainly introduces: System Monitor: Monitor the memory and CPU of the switch. Log: View configuration parameters on the switch. Device Diagnose: Test the connection status of the cable connected to the switch, test if the port of the switch and the connected device are available. Network Diagnose: Test if the destination is reachable and the account
ページ13に含まれる内容の要旨
Chapter 2 Introduction Thanks for choosing the TL-SG3216/TL-SG3424 JetStream L2 Lite Managed Switch! 2.1 Overview of the Switch Designed for workgroups and departments, TL-SG3216/TL-SG3424 from TP-LINK provides wire-speed performance and full set of layer 2 management features. It provides a variety of service features and multiple powerful functions with high security. The EIA-standardized framework and smart configuration capacity can provide flexible solutions for a variable scale o
ページ14に含まれる内容の要旨
2.3 Appearance Description 2.3.1 Front Panel Figure 2-1 Front Panel The following parts are located on the front panel of the Switch: 10/100/1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding 1000Mbps LED. SFP Ports: Designed to install the SFP module. Port 15F shares the same LED with Port 15T and Port 16F shares the same LED with Port 16T. The Port 15F (16F) and Port 15T (16T) are referred to as “combo” port
ページ15に含まれる内容の要旨
Note: The TL-SG3424 Switch provides 4 SFP module ports (21F, 22F, 23F, 24F). The port 21F-24F share the same LED with the port 21T-24T respectively. 2.3.2 Rear Panel The rear panel of TL-SG3216/TL-SG3424 features a power socket and a Grounding Terminal (marked with ). Figure 2-2 Rear Panel Grounding Terminal: TL-SG3216/TL-SG3424 already comes with Lightning Protection Mechanism. You can also ground the Switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable.
ページ16に含まれる内容の要旨
Chapter 3 Login to the Switch 3.1 Login 1) To access the configuration utility, open a web-browser and type in the default address http://192.168.0.1 in the address field of the browser, then press the Enter key. Figure 3-1 Web-browser Tips: To log in to the Switch, the IP address of your PC should be set in the same subnet addresses of the Switch. The IP address is 192.168.0.x ("x" is any number from 2 to 254), Subnet Mask is 255.255.255.0. For the detailed instructions as to how
ページ17に含まれる内容の要旨
Figure 3-3 Main Setup-Menu Note: Clicking Apply can only make the new configurations effective before the switch is rebooted. If you want to keep the configurations effective even the switch is rebooted, please click Saving Config. You are suggested to click Saving Config before cutting off the power or rebooting the switch to avoid losing the new configurations. Return to CONTENTS 10
ページ18に含まれる内容の要旨
Chapter 4 System The System module is mainly for system configuration of the switch, including four submenus: System Info, User Manage, System Tools and Access Security. 4.1 System Info The System Info, mainly for basic properties configuration, can be implemented on System Summary, Device Description, System Time and System IP pages. 4.1.1 System Summary On this page you can view the port connection status and the system information. The port status diagram shows the working status of
ページ19に含まれる内容の要旨
Indicates the SFP port is not connected to a device. Indicates the SFP port is at the speed of 1000Mbps. Indicates the SFP port is at the speed of 100Mbps. When the cursor moves on the port, the detailed information of the port will be displayed. Figure 4-2 Port Information Port Info Port: Displays the port number of the switch. Type: Displays the type of the port. Rate: Displays the maximum transmission rate of the port. Status: Displays the connection status of the po
ページ20に含まれる内容の要旨
Rx: Select Rx to display the bandwidth utilization of receiving packets on this port. Tx: Select Tx to display the bandwidth utilization of sending packets on this port. 4.1.2 Device Description On this page you can configure the description of the switch, including device name, device location and system contact. Choose the menu System →System Info →Device Description to load the following page. Figure 4-4 Device Description The following entries are displayed on this screen: De
