ページ1に含まれる内容の要旨
29893
Digital Answerer with
Call Waiting Caller ID and
Speakerphone Telephone
User's Guide
We bring good things to life.
ページ2に含まれる内容の要旨
IMPORTANT INFORMATION NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The Industry Canada does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be insta
ページ3に含まれる内容の要旨
TABLE OF CONTENTS IMPORTANT INFORMATION ....................... 2 ANSWERER OPERATION ........................ 20 INTERFERENCE INFORMATION ................... 2 CALL ANSWERING ........................... 20 HEARING AID COMPATIBILITY................... 2 AUTODISCONNECT ........................... 20 BEFORE YOU BEGIN .............................. 5 PLAYING MESSAGES ........................ 21 PARTS CHECKLIST ............................. 5 ERASE MESSAGES .......................... 22 MODULAR JACK
ページ4に含まれる内容の要旨
MESSAGE INDICATORS ......................... 29 STORING CALLER ID RECORDS .......... 36 USING THE SPEAKERPHONE .................. 30 INSERTING A PAUSE IN THE DIALING SPEAKERPHONE LOCATION ................ 30 SEQUENCE ................................. 37 SPEAKERPHONE USE ....................... 30 CHANGING A STORED NUMBER ......... 37 TELEPHONE OPERATION ....................... 31 DIALING A STORED NUMBER ............. 37 RECEIVING A PHONE CALL ................ 31 DIALING A QUICK DIAL NUMBER .....
ページ5に含まれる内容の要旨
N E W C A R U L D I M E A E L N E L G S T S G A S A E G T E S BEFORE YOU BEGIN PARTS CHECKLIST Make sure your package includes the following items: Mounting bracket O N ERASE VOL + ON/OFF MEM DIAL STORE VOL - FLASH A ABC DEF 1 2 3 QUICK DIAL REDIAL/PAUSE B GHI JKL MNO 4 5 6 HOLD C PQ RS TUV WX YZ 7 8 9 MEM DIAL TONE OPER0 # SPEAKER * mic Line cords Handset Coiled cord AC power supply Base MODULAR JACK REQUIREMENTS You need an RJ11(CA11A) type modular jack, which is the most common type of phon
ページ6に含まれる内容の要旨
INSTALLATION DESKTOP INSTALLATION 1. Plug the coiled cord into the handset. Plug the other end into the jack on the side of the base. 2. Place the handset in the base. 3. Plug the long telephone line cord into the LINE jack on the back of the phone. Plug the other end into a wall jack. 4. Connect the small end of the power supply into the POWER 9V AC jack on the back of the answerer. Plug the other end into an AC power outlet. The unit beeps once and is ready for setup or to answer calls with th
ページ7に含まれる内容の要旨
N E W C A R U L D I M E A E L N E L G S T S G A S A E G T E S WALL MOUNT INSTALLATION 1. Turn the handset hook 180° until it clicks into place. You need to do this so that the handset doesn’t fall O N out of the base. ERASE VOL + ON/OFF MEM DIAL STORE VOL - FLASH 2. Plug the coiled cord into the handset. Plug the other A 1 ABC2 DEF3 QUICK DIAL REDIAL/PAUSE B GHI JKL MNO 4 5 6 end into the jack on the side of the base. HOLD C PQ TUV WX RS 7 8 YZ 9 MEM DIAL TONE OPER SPEAKER 0 # * 3. Place the h
ページ8に含まれる内容の要旨
6. Feed the short line cord through the grooves provided so that the bottom of the phone is flat and ready to mount on the wall. 7. Connect the other end of the line cord into the wall phone jack. 8. Connect the small end of the power supply into the POWER 9V AC jack on the back of the answerer. Plug the other end into an AC power outlet. The unit beeps once and is ready for setup or to answer calls with the default greeting and settings. 9. Slip the mounting holes of the base (on bottom of unit
ページ9に含まれる内容の要旨
IMPORTANT INSTRUCTIONS FOR MOVING THE ANSWERER: To move the answerer to a different location in the house, follow these instructions: 1. Disconnect the phone line. 2. Go to the electrical outlet and unplug the power supply. 3. Move the unit and phone line to the desired location. 4. Plug in the power supply into an electrical outlet. 5. The display shows that the messages have not been erased. 6. Connect the phone line. 7. Reset the time/date settings or wait for the next call to set them automa
ページ10に含まれる内容の要旨
SETUP RECORDING THE GREETING Before using your new answerer, you should record a greeting (the announcement callers hear when your answering system answers a call). If you don't record a greeting, callers hear a default greeting which says, " We are unable to take your call. Please leave a message. Thank you for calling." When recording the greeting you should be about 6 inches from the unit. Eliminate as much background noise as possible. 1. Prepare your greeting. Sample Greeting: Hi, this is (
ページ11に含まれる内容の要旨
SETTINGS You can customize the following settings to suit your needs. Display Contrast Selects the display Default Settings contrast. Display Contrast 3 Time/Date Sets the time and date. Time/Date 12 a.m. 1/01 Local Area Code Sets your local area code Local Area Code – – – for Dial Back. Message Length 2 minutes Message Length Sets the length of time Rings to Answer 4 allowed for Security Code 123 incoming messages. Dialing Tone Rings to Answer Selects the number of Regional Area Codes – – – rin
ページ12に含まれる内容の要旨
N E W C A R U L D I M E A E L N E L G S T S G A S A E G T E S SETTING THE DISPLAY CONTRAST This setting allows you to adjust the display contrast for easier readability. MENU button ENTER button 1. Press and release the MENU button until SET CONTRAST is displayed. The unit announces, “Setup menu. To change setting, use NEXT or PREVIOUS. To save a setting, press ENTER.” O N 2. Use NEXT or PREVIOUS to select the desired setting ERASE VOL + or press the keypad number for the setting (1-5). ON/OFF
ページ13に含まれる内容の要旨
N E W C A R U L D I M E A E L N E L G S T S G A S A E G T E S MINUTES 1. Use NEXT or PREVIOUS to set the minutes. 2. When finished, press ENTER to confirm. Now you’re ENTER button ready to enter the time of day, AM or PM. AM/PM 1. Use NEXT or PREVIOUS to set the time of day. O N 2. When finished, press ENTER to confirm. Now you’re ERASE VOL + ready to enter the month. ON/OFF MEM DIAL STORE VOL - FLASH A 1 ABC2 DEF3 QUICK DIAL REDIAL/PAUSE B GHI JKL MNO MONTH 4 5 6 HOLD C PQ TUV WX RS 7 8 YZ 9
ページ14に含まれる内容の要旨
N E W C A R U L D I M E A E L N E L G S T S G A S A E G T E S SETTING YOUR LOCAL AREA CODE ENTER button 1. If you just adjusted the Time/Date menu, skip to step 2. If you haven’t adjusted any other setting, press MENU button PLAY/STOP and release the MENU button until LOCAL AREA button CODE is displayed. 2. Use NEXT or PREVIOUS to select the first digit. 3. Once the first digit is set, press ENTER. O N ERASE VOL + 4. Repeat steps 2-3 until all the digits of the area code ON/OFF are set. MEM DIA
ページ15に含まれる内容の要旨
N E W C A R U L D I M E A E L N E L G S T S G A S A E G T E S SETTING THE RINGS TO ANSWER This setting allows you to set the number of rings before the unit answers a call. You can choose from 2-8 or Toll MENU button PLAY/STOP Saver (see “Toll Saver.”) button 1. If you just adjusted the Message Length menu, skip to step 2. If you haven’t adjusted any other setting, press and release the MENU button until SET RINGS TO ANS is displayed. O N ERASE VOL + 2. Use NEXT or PREVIOUS or press the keypad
ページ16に含まれる内容の要旨
N E W C A R U L D I M E A E L N E L G S T S G A S A E G T E S SETTING THE SECURITY CODE ENTER button This feature allows you to change the factory default remote access code used for remote access to you MENU button PLAY/STOP answerer. The default code is 123. button 1. If you just adjusted the Rings to Answer menu, skip to step 2. If you haven’t adjusted any other setting, press and release the MENU button until REMOTE ACCESS is displayed. O N ERASE VOL + 2. Use NEXT or PREVIOUS to select the
ページ17に含まれる内容の要旨
N E W C A R U L D I M E A E L N E L G S T S G A S A E G T E S SETTING THE DIALING MODE ENTER button This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing. The phone is MENU button PLAY/STOP automatically set for touch-tone use. button 1. If you just adjusted the Remote Access menu, skip to step 2. If you haven’t adjusted any other setting, press and release the MENU button until DIALING is displayed. O N ERASE VOL + 2. Use NEXT or PREVIOUS or press the keypad num
ページ18に含まれる内容の要旨
N E W C A R U L D I M E A E L N E L G S T S G A S A E G T E S You may need to use this feature if you have: • Multiple area codes ENTER button • Overlapping area codes MENU button PLAY/STOP • Areas that require 10-digit dialing. button 1. If you just adjusted the Dialing menu, skip to step 2. If you haven’t adjusted any other setting, press and release the MENU button until REGIONAL AC# is O displayed. The first digit of code #1 flashes. N ERASE VOL + ON/OFF 2. Use NEXT or PREVIOUS to set the f
ページ19に含まれる内容の要旨
N E W C A R U L D I M E A E L N E L G S T S G A S A E G T E S MESSAGE VOLUME Use the VOL buttons to adjust the volume when playing back messages and while reviewing or changing the setting. VOL buttons RINGER VOLUME Use the VOL buttons to adjust the loudness of the ringer when the handset is in the cradle of the base. The phone gives a sample ring when adjusting. O N ERASE VOL + HANDSET VOLUME ON/OFF MEM DIAL STORE VOL - FLASH A Use the VOL buttons to adjust the handset listening ABC DEF 1 2 3
ページ20に含まれる内容の要旨
N E W C A R U L D I M E A E L N E L G S T S G A S A E G T E S ANSWERER OPERATION CALL ANSWERING PLAY/STOP When a call comes in, the unit will ring the number of button times set, play the greeting, and record the incoming call. You can: • Answer the call before the unit answers. O N ERASE VOL + • Pick up the phone during the greeting. ON/OFF MEM DIAL STORE VOL - FLASH • Listen to the incoming message (Call screening). A 1 ABC2 DEF3 QUICK DIAL REDIAL/PAUSE B GHI 4 JKL5 MNO6 • Pick up the phone
