ページ1に含まれる内容の要旨
PAS ARTICULATING HEDGE CLIPPER ATTACHMENT
1
OPERATOR'S MANUAL
PAS Articulating Hedge Clipper Attachment
Operator's Manual
MODEL 99944200590
Serial Number 001001 & Up
FOR MODELS: SRM-2100SB/2400SB
SRM-210SB/211SB
SRM-260SB/261SB
PAS-2100/2400
PAS-210/211
PAS-230/231
PAS-260/261
PAS-2601
WARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an Operator's
Manual and a Safety Manual for Pro Attachment Series power source or Split Boom
Trimmer. Those manuals and
ページ2に含まれる内容の要旨
2 INTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job-dependability. Read and understand this manual included with your attachment. You will find this manual easy to use and full of helpful operations tips and SAFETY messages. THE OPERATOR'S MANUAL Read and understand this manual before operation. Keep it in a safe place for future reference. It contains specifications and information for operation and maintenance specif
ページ3に含まれる内容の要旨
IMPORTANT PAS ARTICULATING HEDGE CLIPPER ATTACHMENT 3 OPERATOR'S MANUAL MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION Throughout this manual and on the product itself, you will find safety alerts and helpful, information messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you. This symbol accompanied by the words WARNING and DANGER calls attention to an act or condition that can IMPORTANT The enclosed message lead to
ページ4に含まれる内容の要旨
4 INTERNATIONAL SYMBOLS Symbol Symbol Symbol Symbol Symbol form/shape Symbol form/shape Symbol form/shape description/application Symbol form/shape description/application description/application description/application Wear slip resistant DO NOT allow Read and understand foot wear. Fuel and oil mixture flames or sparks Operator's Manual. near fuel. Engine choke Ignition Finger Severing Wear eyes, ears and control. ON/OFF head protection Wear hand Hot protection. Use Emergency stop Primer bulb S
ページ5に含まれる内容の要旨
PAS ARTICULATING HEDGE CLIPPER ATTACHMENT 5 OPERATOR'S MANUAL EXTENDED OPERATION/EXTREME CONDITIONS Vibration and Cold To reduce the risk of RSI/CTS, do the It is believed that a condition called Raynaud’s Phenomenon, which following: affects the fingers of certain individuals may be brought about by exposure to vibration and cold. Exposure to vibration and cold may Avoid using your wrist in a bent, extended cause tingling and burning sensations followed by loss of color and or twisted positio
ページ6に含まれる内容の要旨
6 SAFE OPERATION WARNING DANGER Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the Manuals Provide all users of this equipment with the Operator's Manual and Safety Manual for instructions on Safe Operation. Clear the Work Area Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use. Keep a
ページ7に含まれる内容の要旨
PAS ARTICULATING HEDGE CLIPPER ATTACHMENT 7 OPERATOR'S MANUAL DESCRIPTION The ECHO product you have purchased has been factory pre-assembled for your convenience. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. CONTENTS LIST _____ 1 - Articulating Hedge Clipper Attachment _____ 1 - Operator's Manual _____ 1 - Hedge Clipper Safety Manual _____ 1 - Warranty Registration Card
ページ8に含まれる内容の要旨
8 SPECIFICATIONS PAS Articulating Hedge Clipper Attachment Shaft Length ------------------------------------------------ 1282.7 mm (50.5 in.) Attachment Width ----------------------------------------- 114.30 mm (4.50 in.) Height ------------------------------------------------------- 92.1 mm (3.63 in.) Weight ------------------------------------------------------ 2.73 kg. (6.02 lb.) Gear Case Ratio -------------------------------------------- 3.5 : 1 Cutter --------------------------------------
ページ9に含まれる内容の要旨
PAS ARTICULATING HEDGE CLIPPER ATTACHMENT 9 OPERATOR'S MANUAL OPERATION WARNING DANGER All over head electrical conductors and communications wires can have electricity flow with high voltages. Never touch wires directly or indirectly when pruning, otherwise serious injury or death may result. ADJUSTING CUTTING ANGLE 1. Place unit on a flat, clear area. Make sure stop switch is in the “STOP” position. B A 2. Move gear tension release lever (A) to “up” position. 3. Grip hedge clipper shaft at
ページ10に含まれる内容の要旨
10 MAINTENANCE Your ECHO trimmer is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your trimmer achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed see your ECHO dealer for repairs. SKILL LEVEL L
ページ11に含まれる内容の要旨
PAS ARTICULATING HEDGE CLIPPER ATTACHMENT 11 OPERATOR'S MANUAL 1. Brush loose debris from blade and coat both sides of blade with the 50-50 cleaning mixture. 2. Allow cleaning mixture to soften the remaining gummy residue then wipe it from the blade. 3. Apply clean oil to the entire length of the blade. Be certain the blade bolts are lubricated. 4. Wipe excess oil from the blade before putting the unit back in service. Gear Housing Level 1. Tools required: Grease Gun, Rag. TM Parts required: EC
ページ12に含まれる内容の要旨
12 Drive Shaft (Lower) Level 1. Tools required: 4 mm hex wrench, 8mm Open End Wrench, Clean Rag, Small Brush. TM Parts required: ECHO LUBE 14 oz. cartridge P/N 91015 or ® Lithium-based Grease. IMPORTANT Lower and upper drive shaft must be lubricated with ECHO ® TM LUBE grease every 50 hours of operation, otherwise drive shaft assembly overheating and failure can result. 1. Carefully remove locating screw and washers (A) to avoid loss of A B blade indexing lever spring (B), and loosen clamping
ページ13に含まれる内容の要旨
PAS ARTICULATING HEDGE CLIPPER ATTACHMENT 13 OPERATOR'S MANUAL SHARPENING BLADES Level 3. Tools required: Flat file, round file, screwdriver Parts required: None WARNING DANGER Hedge Clipper Blades are very sharp. Wear gloves to protect hands. 1. Disconnect spark plug wire from spark plug. 2. Slide blades to allow file clearance using slots (A) on bottom of A A blades. Do not pry against cutting edges. 3. Follow the original shape, and file each cutting edge carefully to avoid damage to adj
ページ14に含まれる内容の要旨
14 BLADE ADJUSTMENT Level 2. Tools required: (2) 10 mm wrenches Parts required: None IMPORTANT Blades should only be removed and reinstalled by an Authorized ECHO Servicing Dealer, otherwise premature wear or internal damage may occur. 1. Tighten blade bolts until snug, then loosen blade bolts 1/2 turn. 2. Hold blade bolts from turning using 10 mm wrench, and tighten blade lock nuts with other 10 mm wrench. NOTE Locking ability of Hedge Clipper blade lock nuts will diminish each time they are re
ページ15に含まれる内容の要旨
PAS ARTICULATING HEDGE CLIPPER ATTACHMENT 15 OPERATOR'S MANUAL NOTES
ページ16に含まれる内容の要旨
SERVICING INFORMATION PARTS Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number and Serial Number of the unit with you. You can find these numbers on the engine housing. For future reference, write them in the space provided below. Model No. _____________ SN. ____________ SERVICE DEALER? Service of this product during the warranty period must be performed
