JBL Gtiの取扱説明書

ページ1に含まれる内容の要旨

TM
PRO POWER
rofessional-Grade Automotive Component Speaker System Owner’s

ページ2に含まれる内容の要旨

Important: Installation of automotive the listener. The combined responses Speaker Placement stereo components can require of the speakers and passive Figures 1–4 show possible speaker extensive experience performing a crossover constitute a 4th-order placements in the order of most – variety of mechanical and electrical Linquitz-Riley acoustic alignment and desirable to least desirable. Kick- + procedures. Although these instruc- cannot be duplicated with any elec- panel mounting will provi

ページ3に含まれる内容の要旨

TM PRO POWER Woofer Installation Electrical Connections and Crossover Adjustments DECLARATION OF CONFORMITY We, Harman Consumer International 2, route de Tours 72500 Chateau-du-Loir France declare in own responsibility, that the products described in this owner’s manual are in compliance with technical standards: EN 50081-1:1992 EN 50082-1:1997 Figure 7. Emmanuel Millot Harman Consumer International Mounting the C508GTi or C608GTi woofer Chateau-du-Loir, France 7/01 where there is no facto

ページ4に含まれる内容の要旨

Specific C508GTi C608GTi Tweeter 5-1/4" Professional-grade 6-1/4" Professional-grade automotive component automotive component speaker system speaker system Power handling (peak) 500W 600W n/a Power handling (RMS) 125W 150W n/a Frequency response 58Hz – 21kHz 50Hz – 21kHz n/a Nominal impedance 4 ohms 4 ohms n/a Sensitivity (2.83V/1m)88dB 89dB n/a Crossover 4th-Order Linquitz-Riley Acoustic, 3500Hz, 24dB/octave n/a Cut-out diameter 4-5/8" (118mm) 5-1/8" (131mm) 1-3/4” (45mm) Mounting depth 2-3/8