ページ1に含まれる内容の要旨
WH-TV/DVD21NO
COMBINED 21" TV AND DVD PLAYER
OWNER'S MANUAL
TV
+
Please read this manual carefully
before using this TV set and keep it
for future reference.
ページ2に含まれる内容の要旨
CONTENTS Before Operation Warning and cautions.................................................................................1 Installation...................................................................................................2 Aerial connection........................................................................................2 Preparation of the remote control...............................................................2 Function buttons and external sockets.....
ページ3に含まれる内容の要旨
Warning and cautions 4. Do not place the TV set near rain or 1. When you clean the TV set, please pull out the power plug from AC outlet. moisture as it may cause an electric Don't clean the cabinet and the shock, or the TV set to catch fire. The screen with petrol, paraffin or other TV set must only powerful solvents. Permanent damage be used in dry in will result ! door locations. 2. In order to prolong the life of the 5. The back cover must only be product, please use in a we
ページ4に含まれる内容の要旨
Installation Aerial Connection If the picture is not clear or snowy, we recommend that you use an outdoor aerial.In different places, the suitable antenna type and position are different. 300 twin-lead cable Antenna adapter (Not supplied) 75 coaxial cable COAXIAL Aerial input OUT IN VIDEO L R AUDIO 75 standard coaxial type Plug (Not supplied) AC power socket Note: * It is recommended that a 75 ohm coaxial antenna is used to avoid interference. *To avoid interferen
ページ5に含まれる内容の要旨
Function Buttons and External Sockets Front panel the TV set PROGRAME Rear panel of the TV set COAXIAL COAXIAL Antenna input socket Video output terminal Audio right channel output terminal OUT Video input terminal Audio left channel output terminal IN Audio right channel input terminal L R VIDEO AUDIO Audio left channel input terminal
ページ6に含まれる内容の要旨
Using the Remote Control Buttons on the remote control Stand By DVD Open/close POWERCALENDAR TIME OPEN/CLOSE Calendar Scan SCAN SWAP CA LL MU TE TV Time Menu Mute 1 2 3 4 Former Program Call Screen Display 5 6 7 8 Program Number TV/AV (Not available) 9 9 0 0 -/ -/-- -- TV/AV Exchange TV/DVD Digital Selector P+ TV/DVD Volume/Channel Selection V- MENU V+ MENU Exit Screen Display EXIT P.STD Picture Mode P- DVD STOP STOP PAUSE/STEP SETUP (Not available) DVD SETUP REV FW . PREV NEXT DVD PAUSE/STEP
ページ7に含まれる内容の要旨
Switching on/ off the TV set This section explains the use of the power button and remote handset to turn your unit on and off. Switching the TV set on/ off Switching the TV set on/ off 1 Press the AC power switch on the front of the TV. The power indicator will light. 2 If the indicator is lighting in red, press the button on the remote control again. Note 1 When you can't operate the TV set with a remote control, you can turn it on by pressing the P+/- buttons on the TV set
ページ8に含まれる内容の要旨
Watching TV You can watch a TV program on a channel which has been tuned to a broadcast. Watching TV programs How to select TV program Select the desired program 1 Using number buttons Directly enter the channel number with the numeric keypad on the remote control. 1 2 3 4 To select channel numbers between 10 ~ 99 press [-/--] button and enter the two digit channel number To select channel numbers between 100 ~ 218 press [-/--] button 5 6 7 8 twice and enter the 3 digit channel number 9 9
ページ9に含まれる内容の要旨
Watching TV continued Press the SWAP button to select the channel you were watching previously. Auto scan function scans through all programs in memory including those with "skip" set to "off" (see "Program skip" on page 13). Program swap and auto scan functions Program swap Press the SWAP button to 18 select the channel you were AUTO watching previously. I 8 SWAP AUTO I 18 AUTO I Auto program scan 1 Press the SCAN button to SCAN 1 scan through all the memorised AUTO I TV progr
ページ10に含まれる内容の要旨
Searching channel This TV set has three methods to set the channels, which are respectively full automatic, semi automatic and manual fine tune. - In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel. Full automatic mode Automatic search 1 Press the MENU button. The MAIN MENU will appear with the PIC (picture) icon flashing. Press the MENU button a further 3 times PROG NO ORGANISE until the TUN (tuning
ページ11に含まれる内容の要旨
Searching channel Continued Semi-automatic search Semi-automatic search 1 Press the P+/- buttons or the 1 PROGRAMME NUMBER (0-9) to AUTO choose the desired channel I (e.g. Channel 1). P + 2 Press the MENU button. The MAIN MENU will appear with the PIC (picture) icon flashing. Press the MENU button MENU V- V + a further 3 times until the TUN (tuning) icon is flashing. Press P- to enter the TUNING menu. P - 3 buttons Press the P+/- to select "SEARCH". PROG NO ORGANISE SEARCH
ページ12に含まれる内容の要旨
Searching channel Continued Manual fine tune Manual fine tune If the picture and/or sound are poor, try using the FINE TUNE feature. Do not use this feature unless reception is poor. 1 Press the P+/- buttons or 1 P + AUTO PROGRAM NUMBER 0-9 1 button to choose the desired MENU V- V + channel (e.g. channel 1). P - 2 Press the MENU button. The MAIN MENU will appear with the PIC (picture) icon flashing. Press the MENU button a further 3 times until the TUN (tuning) icon is flas
ページ13に含まれる内容の要旨
Searching channel Continued Program skip Program skip Channels can be set so that they are skipped during program selection. 1 Press the P+/- buttons or 1 P+ AUTO PROGRAM NUMBER 0-9 I button to choose the desired MENU V- V+ channel (e.g. channel 1). P- 2 Press the MENU button. The MAIN MENU will appear with the PIC (picture) icon flashing. Press the MENU button a further 3 times until the TUN (tuning) icon is flashing.Press P- to enter the TUNING menu. P + 3 Press the P+/- butto
ページ14に含まれる内容の要旨
Convenient picture and sound control functions Multiple picture modes How to select picture modes You can quickly select the desired picture mode from STANDARD four preset modes and one customized mode. Press the P.STD button to select the desired P.STD RICH picture quality. Five kinds of picture modes USER (i.e., RICH", "STANDARD",""USER","LISTEN", "SOFT" ) can be selected in turn. LISTEN The 5 modes are SOFT Listen-This is a new feature that blacks out the TV screen when
ページ15に含まれる内容の要旨
Convenient picture and sound control functions Continued Black Stretch Automatically increases the contrast range Noise Reduce Picture Noise & Grain Reduction Circuit. (Use only on poor reception) Black stretch and noise reduce How to select BLACK STRETCH 1Press the MENU button. The MAIN MENU will appear with the PIC (picture) icon flashing.Press BACKGROUND the MENU button a further 2 BLACK STRETCH ON times until the FUN (function) NOISE REDUCE P + icon is flashing.Press P- to FADE AVL
ページ16に含まれる内容の要旨
Convenient picture and sound control functions Continued Mute and Fade Sound mute 1 Press the MUTE button on the MUTE MUTE remote control to turn off the sound. MUTE will appear on the top left of the display. 2 Press MUTE again to turn the sound back on. Fade When FADE is turned on, the TV will protect the tube by fading the picture in when the TV is switched on, and fading the picture out when the TV is switched off. 1Press the MENU button. P + FUN The MAIN MENU will appear with th
ページ17に含まれる内容の要旨
Time functions Clock setting and timer on/off functions Clock setting The clock will only work if the TV set if left turned on or in standby. When the set is disconnected from the TIME power supply or is turned off by the main power on the front panel, the clock loses power and will need to be reset when the power is reconnected. 1 Press the TIME button, and the TIME menu appears on the P + screen. TIME CLOCK 17:18 2 Press the P+/- buttons
ページ18に含まれる内容の要旨
Time functions Continued Sleep timer and program preset Sleep timer The sleep timer switches the set 0 to stand-by after the sleep time has elapsed. Sleep time can be 10 set in 10 minute intervals up to 20 180 minutes, as shown in the TIME illustration. Setting the sleep 170 time to zero turns off the sleep timer. 180 1 Press the TIME button, and the TIME menu appears on the screen. TIME 2 Press the P+/- buttons to P + CLOCK 17:18 select "SLE
ページ19に含まれる内容の要旨
Set up function Screen saver and Calendar How to start screen saver function When the background NO SIGNAL function is ON a bouncing 'NO SIGNAL' will be displayed on a blue back ground. 1Press the MENU button. The MAIN MENU will appear with the PIC (picture) icon flashing. Press the MENU P + button a further 2 times until the FUN (function) icon is flashing.Press P- to enter the FUNCTION menu. MENU V- V + P - 2 Press the P+/- buttons to select BACKGROUND. Then press V+/- to turn th
ページ20に含まれる内容の要旨
Set up function Continued AVL AVL function Automatic Volume Level control reduces the effect of large volume changes. For instance, when advertisements come on. 1Press the MENU button. The MAIN MENU will P+ appear with the PIC BACKGROUND (picture) icon flashing. BLACK STRETCH MENU V- V+ Press the MENU button NOISE REDUCE FADE a further 2 times until the AVL P- FUN (function) icon is flashing.Press P- to enter the FUNCTION menu. P + 2 Press the P+/- button to select MENU "AVL" .
