JL Audio Stealthbox SB-D-CLGR/12W3V3の取扱説明書

ページ1に含まれる内容の要旨

SB-D-CLGR/12W3v3 INSTR_SKU# 011294
Installat Ion

d I F F I C u l t Y :

If you choose to perform the installation yourself, it is absolutely vital that
®
out
the Stealthbox be properly mounted to the vehicle according to these
o F
instructions. Failure to mount the enclosure properly presents two problems:
I n s t a l l a t I o n G u I d e
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
25
caused by the force exerted by the woofer(s).
SB-D-CLGR/

ページ2に含まれる内容の要旨

SB-D-CLGR/12W3v3 INSTR_SKU# 011294 I n C l u d e d H a R d W a R e s t e P 4 Drill a 1/2” hole through the impression made in the 3” x 3” 1) 3/8-16 x 2 1/4” Allen Head Set Screw 1) 3/8” Split Lock Washer Wax Square in towards the rear wheel. 1) 3/8” x 1 1/4” Fender Washer 1) 3/8-16 Hex Nut 1) 3” x 3” Wax Square *CAUTION* Before drilling, always make sure that you are not going to be drilling into any gas lines, brake lines, tires, transmission lines, electrical