JL Audio Stealthbox SB-D-TRKCTR/12W3v3の取扱説明書

ページ1に含まれる内容の要旨

®
Stealthbox
INSTALLATION GUIDE START This enclosure is not designed to be a pas-
HERE
for the
senger seat.We do not recommend it to be
used as such.
SB-D-TRKCTR/12W3v2
(1994-2002 Dodge Ram) If you are dealing with a 1997-2002 there
➔ ➔ ➔
will be a small black box bolted to the
underside of the center seat.This is the
seatbelt sensor and must be handle with
care. See STEP 9.
STEP 1: Slide the sat bolts out of the elastic STEP 3: Detach the cover fromt he center cush-
loops on the center cushion.

ページ2に含まれる内容の要旨

Cont. From STEP 9: If your are dealing with a truck that has Previous STEP 11: Bolt the enclosure into place using the the seat belts sensor(black box). Attach this black Page factory bolts that were removed in STEP 2. box to the driver’s seat floor brackets. Make sure DO NOT completely thighten till all four 8mm that the mounting of this black box is exactly the CONGRATULATIONS! INSTALL COMPLETE. bolts have been threaded. ➔ way it was posistioned by the factory. If not, the seat➔➔ ➔ belts will