JL Audio Stealthbox SB-F-TRKCTR3/10W3v3の取扱説明書

ページ1に含まれる内容の要旨

®
Stealthbox
INSTALLATION GUIDE
START
for the
HERE
SB-F-TRKCTR3/10W3
(Fits 2001-Up Standard Cab, Super-Cab
and Super-Crew trucks
lso fits, 2001 Harley Davidson and King
Ranck trucks)
STEP 1: Remove the front cup holder to STEP 2: Remove tray and liner to reveal two STEP 3: Cut and remove the carpet under
reveal two 18mm bolts. Remove these bolts. 18mm bolts. Remove these bolts. Remove the console as shown in the picture.
console from truck.
**WARNING**
Seat Belt sensor wire runs underneath this

ページ2に含まれる内容の要旨

Cont. 1 From age 1 ➔➔ 4 2 3 STEP 8: Remove the four screws (two per STEP 9: A large section of the bottom of the STEP 10: Remove the nine remaining 7mm STEP 11: Sandwich the Stealthbox between side) from the sides of the console. console must be removed. The cut travels bolts to separate the inner console. the two halves of the inner console and from side to side 3/4” in front of the bolt at secure using the nine 7mm bolts removed in the rear the bottom of the console (point step 10. #1). This c

ページ3に含まれる内容の要旨

Cont. From Page 2 CONGRATULATIONS! INSTALL COMPLETE. Included Hardware: (1) Replacement Tray (2) 8”x8” Carpet Pieces STEP 19: Reinstall console top (removed in Estimated Installation Duration: Step 5) and place supplied tray into console. Specifications: Mid/High Frequency Driver Information: Enclosure Type: Acoustic Suspension (Sealed) Driver Type: One JL AUDIO 10W3-D6 Subwoofer Nominal Impedance: 3 Front Location Driver Size: XR570-CSi Cont. Power Handling: 250 Watts 5"x7” (1271mm x 177.8mm) A