ページ1に含まれる内容の要旨
The Cobra line of quality products includes:
Making Life Easier and Safer
®
Introduction
CB Radios • microTALK Radios • Radar/Laser Detectors •
®
Safety Alert Traffic Warning Systems • Handheld GPS Receivers •
®
Mobile GPS Navigation Systems • HighGear Accessories • Staying in touch with your family and friends is
®
CobraMarine™ VHF Radios • Power Inverters • Accessories
convenient and easy when using your microTALK
radio. Some of the many uses you will discover include:
Communic
ページ2に含まれる内容の要旨
Product Features Product Features Introduction Introduction Wrist Strap Features Backlit LCD Display Connector • Two-Way Radio Lock Icon With up to an 10 mile Belt Clip (16 km) range Call Alerts and Keystroke Tones Icon ® VibrAlert Icon Battery • 22 Channels Roger Beep Icon Seven shared Compartment Signal Strength with FRS/GMRS, Vox Icon Meter Icon Battery Door seven FRS Antenna Latch only, eight Hi•Low Scan Icon GMRS only Power Icon • 38 Privacy Codes External Speaker/ • Hands-Free Micr
ページ3に含まれる内容の要旨
Introduction Operation Customer Assistance Warranty ® Caring for Your microTALK Radio • ® Your microTALK radio will give you years of trouble-free service if cared for properly. Handle the radio gently. Keep the radio away from dust. Never put the radio in water or in a damp place. Avoid exposure to extreme temperatures. Batteries Remove Belt Clip • To install or replace batteries: 1. Remove belt clip by releasing belt clip latch and sliding clip up. Pull Up Latch 2. Pull up on the battery do
ページ4に含まれる内容の要旨
Using Your Radio Operation Introduction Operation Customer Assistance Warranty ® On/Off Power Turning on Your microTALK Radio Talk Button Communicating with Another Person • • To turn on your radio: To talk to another person: 1. Rotate the On/Off Volume knob clockwise 1. Press and hold the Talk button. to turn on your radio and adjust the volume. 2. With the microphone about two inches Two Inches (five A series of tones will indicate the radio is on. (five cm) from your mouth, speak in a cm)
ページ5に含まれる内容の要旨
Using Your Radio Operation Introduction Operation Customer Assistance Warranty Volume Knob Volume Auto Squelch/Maximum Range • • ® To adjust the volume: Your microTALK radio is equipped with Auto Squelch, which automatically shuts off weak transmissions and unwanted noise 1. Rotate the On/Off Volume knob. due to terrain and conditions. This slightly reduces the Maximum Call Button Range at which signals can be heard. Call Button • To alert another person that you are calling: You can turn off a
ページ6に含まれる内容の要旨
Using Your Radio Operation Introduction Operation Customer Assistance Warranty ® Dual Function Buttons microTALK Range • ® ® Two of the buttons on the microTALK radio have Dual Functions; Your microTALK radio has a range of up to 10 miles (16 km). Your range will vary depending on terrain and conditions. Mode/Lock In flat, open country your radio will Maximum Range • Press and release the button to scroll to the next mode function. operate at maximum range. • Press and hold the button for tw
ページ7に含まれる内容の要旨
Mode Functions Operation Introduction Operation Customer Assistance Warranty CTCSS Privacy Codes Voice Activated Transmit (VOX) • • ® CTCSS (Continuous Tone Coded Squelch System) is an advanced In VOX mode, your microTALK radio can be used “hands-free,” tone coding system allowing you to select one of 38 privacy codes automatically transmitting when you speak. You can set the VOX to reduce interference from other users on the channel. sensitivity level to fit the volume of your voice and avoid t
ページ8に含まれる内容の要旨
Mode Functions Operation Introduction Operation Customer Assistance Warranty 10 Memory Locations While setting a memory location, if you do not press any buttons • ® for 15 seconds, your radio will automatically return to Standby Your microTALK radio has 10 Memory Locations for storing mode on the channel/privacy code displayed before you entered your most frequently used channels and channel/privacy code mode functions. combinations. These Memory Locations can be selected individually or can b
ページ9に含まれる内容の要旨
Mode Functions Operation Introduction Operation Customer Assistance Warranty Mode/Lock Button To de-program a memory location: Channel Scan • ® Your microTALK radio can automatically scan channels. 1. Press the Mode/Lock button until the Memory icon and the memory location To scan channels: Mode/Lock Button flash on the display. 1. Press the Mode/Lock button until the Memory Icon 2. Press the Channel Up or Channel Down Scan icon and the channel numbers button to select the memory location f
ページ10に含まれる内容の要旨
Mode Functions Operation Introduction Operation Customer Assistance Warranty During channel scan (while not receiving a transmission), While setting privacy code scan, if you do not press any buttons you can choose from the following: for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code that was displayed before a. Press and hold the Talk button to communicate on the you entered mode functions. channel or channel/privacy code that was displayed befo
ページ11に含まれる内容の要旨
Mode Functions Operation Introduction Operation Customer Assistance Warranty Memory Location Scan If you press the Talk button while scanning, but more than • ® 10 seconds after receiving a transmission, you will transmit on Your microTALK radio can automatically scan up to the memory location on which, during scanning, you last received 10 programmed Memory Locations. a transmission. This will return the radio to Standby mode. If there are one or fewer memory locations If you do not press
ページ12に含まれる内容の要旨
Mode Functions Operation Introduction Operation Customer Assistance Warranty ® VibrAlert and Call Tones Roger Beep Confirmation Tone • • ® Your microTALK radio can alert you to incoming signals by Roger Beep is an audible tone that your listener will hear when you sounding an audible call tone, by vibrating silently or both. release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak. ® To change call settings: Mode/Lock Button VibrAlert + Ri
ページ13に含まれる内容の要旨
General Specifications Operation Introduction Operation Customer Assistance Warranty General Specifications IMPORTANT NOTICE: FCC LICENSE REQUIRED • • This two-way radio operates on GMRS (General Mobile Radio Service) frequencies FRS/GMRS Frequency which require an FCC (Federal Communications Commission) license. A user must Allocation and Compatibility be licensed prior to operating on Channels 1 through 7 on high power or 15 through 22, which comprise the GMRS channels of this radio. Serious
ページ14に含まれる内容の要旨
Product Service Questions, Warranty and Trademarks Customer Assistance Introduction Operation Customer Assistance Warranty Product Service Questions Limited One-Year Warranty • • If you have any questions about operation or installing For Products Purchased in the U.S.A. your new Cobra product, or if you are missing parts… ™ Cobra Electronics Corporation warrants that its Cobra microTALK Please call Cobra first! DO NOT RETURN THIS PRODUCT radios, and the component parts thereof, will be free of
ページ15に含まれる内容の要旨
2 24 4 E En ng glliis sh h
