ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Declaration of Conformity NAG-LACR-EMEA.book Page i Wednesday, April 30, 2008 5:11 PM Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 1301 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-888-567-7347 Hereby declares that the product: Model Name: XPR 6300/XPR 6350 conforms to
ページ4に含まれる内容の要旨
NAG-LACR-EMEA.book Page ii Wednesday, April 30, 2008 5:11 PM Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to r
ページ5に含まれる内容の要旨
Contents NAG-LACR-EMEA.book Page iii Wednesday, April 30, 2008 5:11 PM Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . .6 Contents Assignable Radio Functions . . . . . . . . . . . . . . . . .6 Assignable Settings or Utility Functions . . . . . . . . .6 This User Guide contains all the information you need to Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . . .7 use the MOTOTRBO XPR Series Digital Portable Radios. Switching Between Analog and Digital Mode . . .
ページ6に含まれる内容の要旨
NAG-LACR-EMEA.book Page iv Wednesday, April 30, 2008 5:11 PM Monitoring Features . . . . . . . . . . . . . . . . . . . . . . . . 15 Text Messaging Features . . . . . . . . . . . . . . . . . . . . 22 Monitoring a Channel . . . . . . . . . . . . . . . . . . . . . 15 Sending a Quick Text Message . . . . . . . . . . . . . 22 Permanent Monitor . . . . . . . . . . . . . . . . . . . . . . . 15 Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Utilities . . . . . . . .
ページ7に含まれる内容の要旨
Important Safety Information NAG-LACR-EMEA.book Page v Wednesday, April 30, 2008 5:11 PM Important Safety Information Software Version All the features described in the following sections are Product Safety and RF Exposure Compliance supported by the radio's software version R01.02.01. Before using this product, read the operating Please check with your dealer or system administrator instructions for safe usage contained in the for more details of all the features supported. ! Product Sa
ページ8に含まれる内容の要旨
NAG-LACR-EMEA.book Page vi Wednesday, April 30, 2008 5:11 PM TM The AMBE+2 voice coding Technology embodied in Computer Software Copyrights this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of The Motorola products described in this manual may Digital Voice Systems, Inc. include copyrighted Motorola computer programs stored This voice coding Technology is licensed solely for use in semiconductor memories or other media. Laws
ページ9に含まれる内容の要旨
Getting Started NAG-LACR-EMEA.book Page 1 Wednesday, April 30, 2008 5:11 PM What Your Dealer/System Administrator Getting Started Can Tell You Take a moment to review the following: You can consult your dealer or system administrator about the How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . page 1 following: What Your Dealer/System Administrator Can Tell You . page 1 • Is your radio programmed with any preset conventional channels? How to Use This Guide • Which butt
ページ10に含まれる内容の要旨
NAG-LACR-EMEA.book Page 2 Wednesday, April 30, 2008 5:11 PM IMPORTANT: ALWAYS charge your IMPRES battery with the IMPRES charger. Using a conventional charger Preparing Your Radio for Use causes irrecoverable loss of IMPRES battery Assemble your radio by following these steps: data. As a result, the battery functions as a Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2 non-IMPRES battery and cannot display the data on your radio. Additionally, it voids y
ページ11に含まれる内容の要旨
Preparing Your Radio for Use NAG-LACR-EMEA.book Page 3 Wednesday, April 30, 2008 5:11 PM Attaching the Belt Clip To remove the battery, turn the Align the grooves on the clip with those radio off. Move the on the battery and press downward until battery latch into you hear a click. unlock position and hold, and slide To remove the clip, press the belt clip the battery down tab away from the battery using a key. and off the rails. Then slide the clip upward and away from the radio. Ba
ページ12に含まれる内容の要旨
NAG-LACR-EMEA.book Page 4 Wednesday, April 30, 2008 5:11 PM Press downward on the cover to seat the lower tab properly into If your radio does not power up, check your battery. Make sure the RF connector. that it is charged and properly attached. If your radio still does not power up, contact your dealer. Turn the thumbscrew clockwise to secure the connector cover to the radio. To turn off the radio, rotate this knob counterclockwise until you hear a click. To remove the universal connect
ページ13に含まれる内容の要旨
Identifying Radio Controls NAG-LACR-EMEA.book Page 5 Wednesday, April 30, 2008 5:11 PM Channel Selector Knob 1 Identifying Radio Controls On/Off/Volume Control Knob 2 Take a moment to review the following: LED Indicator Radio Controls You Will Be Using . . . . . . . . . . . . . . . . . page 5 3 Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . . . page 6 Side Button 1* 4 Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . . . . . page 7 Push-to-Talk (PTT) Button 5 S
ページ14に含まれる内容の要旨
NAG-LACR-EMEA.book Page 6 Wednesday, April 30, 2008 5:11 PM Permanent Monitor – Monitors a selected channel for all radio Programmable Buttons traffic until function is disabled. Your dealer can program the programmable buttons as Privacy – Toggles privacy on or off. shortcuts to radio functions or preset channels/groups depending on the duration of a button press: Repeater/Talkaround – Toggles between using a repeater and communicating directly with another radio. • Press – Pressing a
ページ15に含まれる内容の要旨
Identifying Radio Controls NAG-LACR-EMEA.book Page 7 Wednesday, April 30, 2008 5:11 PM You will also hear the Channel Free Indication tone if your Push-To-Talk (PTT) Button call is interrupted, for example when the radio receives an Emergency Call. The PTT button on the side of You can turn off the Channel Free Indication tone by the radio serves two basic disabling all radio tones and alerts (see Turning Radio purposes: Tones/Alerts On or Off on page 24). • While a call is in progress
ページ16に含まれる内容の要旨
NAG-LACR-EMEA.book Page 8 Wednesday, April 30, 2008 5:11 PM Solid green – Radio is transmitting. Also indicates full charge of the battery when the programmed Battery Strength button is Identifying Status Indicators pressed. Your radio indicates its operational status through the following: Blinking green – Radio is powering up, receiving a non- LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8 privacy-enabled call or data, or detecting activity over the a
ページ17に含まれる内容の要旨
Receiving and Making Calls NAG-LACR-EMEA.book Page 9 Wednesday, April 30, 2008 5:11 PM Periodic Tone Sounds periodically depending on the Receiving and Making Calls duration set by the radio. Tone starts, stops, and repeats itself. Once you understand how your MOTOTRBO Portable is configured, you are ready to use your radio. Repetitive Tone A single tone that repeats itself until it is Use this navigation guide to familiarize yourself with the basic terminated by the user. Call features:
ページ18に含まれる内容の要旨
NAG-LACR-EMEA.book Page 10 Wednesday, April 30, 2008 5:11 PM Selecting a Radio Channel, Subscriber ID, Receiving and Responding to a Radio Call or Group ID Once the channel, Procedure: subscriber ID, or group ID LED Indicator Once the required is set, you can proceed to zone is set (if you receive and respond to have multiple zones calls. in your radio), turn The LED lights up solid the Channel green while the radio is Selector Knob to transmitting and blinks select the number th
ページ19に含まれる内容の要旨
Receiving and Making Calls NAG-LACR-EMEA.book Page 11 Wednesday, April 30, 2008 5:11 PM Receiving and Responding to a Group Call Receiving and Responding to a Private Call To receive a call from a group of users, your radio must be A Private Call is a call from an individual radio to another configured as part of that group. individual radio. 1 The LED blinks green. There are two types of Private Calls. The first type, where a radio presence check is performed prior to setting up the ca
ページ20に含まれる内容の要旨
NAG-LACR-EMEA.book Page 12 Wednesday, April 30, 2008 5:11 PM 6 If there is no voice activity for a predetermined period of Making a Radio Call time, the call ends. You can select a channel, subscriber ID or group ID by using: 7 You hear a short tone. • The Channel Selector Knob See Making a Private Call on page 13 for details on making a Private Call. • A programmed One Touch Call button Receiving an All Call NOTE: Your radio must have the Privacy feature enabled on the channel to send
