ページ1に含まれる内容の要旨
IMPORTANT SAFEGUARDS
iHITACHI
VT-FX613A
Owner's Manual
Your Complete Guide
to Videocassette Viewing
and Recording
Using these quality features:
VHS hi-fidelity sound in playback
Automatic tape head cleaning
Up to 8 delayed recording programs
Auto tracking for improved picture in playback
Frequency synthesizer quartz tuner
Illuminated remote control for use with your VCR and TV
On-screen programming guide
Multi-channel TV sound (MTS)
Auto clock set feature
VCR Plus+* programming system for easy t
ページ2に含まれる内容の要旨
IMPORTANT SAFEGUARDS TABLE OF CONTENTS IMPORTANT SAFEGUARDS .......................................................................................... 5 Read This First .................................................................................................................... 9 Getting Started ................................................................................................................... 10 Simple Hookups ..............................................................
ページ3に含まれる内容の要旨
IMPORTANT SAFEGUARDS Basic Recording Steps .............................................................................................. 33 Recording Tips ............................................................................................................ 33 Using the Instant Recording Timer (IRT) ................................................................ 34 Setting the VCR to Record Later ............................................................................. 35 Reviewing W
ページ4に含まれる内容の要旨
IMPORTANT SAFEGUARDS The POWER switch turns the VCR on and off, leaving the clock/timer unaffected. If the unit is to be left unattended for a long period, it is recommended that the unit be completely switched off and unplugged. Illustrated below is the label on the back of your unit. _This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore. it is dangerous to make any kind of contact with any inside part of this unit.
ページ5に含まれる内容の要旨
In addition to the careful attention devoted to quality standards inthe manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too. This page lists important information that will help to assure your enjoyment and proper use of a Video Cassette Recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy place for future reference. INSTALLATION 1 Read and Follow Ins
ページ6に含まれる内容の要旨
Periodically examine the cord and have it replaced by your service technician if appearance indicates damage or deteriorated insulation. 7 Power Cord Protection -- Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 8 Ventilation -- Slots and openings in the cabinet are provided for ventilation to en
ページ7に含まれる内容の要旨
12 Outdoor Antenna Grounding -- If an outside antenna or cable System is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSIINFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of anten
ページ8に含まれる内容の要旨
SERVICE 17 Servicing -- Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18 Conditions Requiring Service -- Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the video pr
ページ9に含まれる内容の要旨
Thank you for buying a Hitachi product. You've chosen the best VCR for you, and we want to help you make the most of your purchase. Please take time to become familiar with this manual and how it is set up. Keep it handy for future reference, too. To guide you, we've concluded: "Must read" sections containing important cautions for your family's safety as well as the basic facts you need to use the VCR. These sections are highlighted like this in the table of contents: Information on the advance
ページ10に含まれる内容の要旨
Relax. Using a VCR is very straightforward. This sections explains how to hookup the VCR, quick tour of the controls, set up for first-time operation using on-screen menus, and videocassette tapes. Enjoy getting to know all about your Hitachi VCR. Let's get started. 1 Decide Where to Put Your VCR Be sure your chosen location allows for proper ventilation, stability, and protection from heat and moisture (see Important Safeguards). Place the VCR near your TV but not on top of it. For convenience
ページ11に含まれる内容の要旨
TV AND VCR UNPLUGGED WHILE HOOKING THEM UP. 3 Hook Up the AudioNideo Signal If your TV is a fairly recent model, you probably have both audio and video jacks. Look on the back of your TV for three jacks - possibly color-coded yellow, white, and red. They will be labeled something like IN (L and R), AUDIO IN, or VIDEO IN. (If you are not sure, look at the back of your VCR - you will see two sets of these jacks.) If you have no jacks like these on your TV, skip this step and proceed to Step 4. TV
ページ12に含まれる内容の要旨
,ook at the back of your TV for a connector that looks like one of these, and follow the corresponding hookup option. If you have any sort of cable box, see the hookup options in Advanced Operations (page 55). Simple Antenna/Cable 75 Ohm Hookup This is an easy hookup that you can use if your cable or antenna has a 75 ohm round wire connector. You will need the 75 ohm cable supplied with your VCR. It looks like this: If you have been watching the TV in your home before getting the VCR, you will a
ページ13に含まれる内容の要旨
Capabilities: With this hookup, you should now be able to perform all the basic functions provided by this equipment. External or Internal 300 Ohm Antenna If you have either an external or internal (rabbit ears) antenna rather than cable, you may have 300 ohm _nnectors like these. In this case, you will need special adapters to make the 75 ohm round wire connection shown below. (You may already have one on your TV.) 1. Remove the antenna line from the back of your TV if it is already connected t
ページ14に含まれる内容の要旨
round VHF If you have "rabbit ears" (an antenna on top of your TV), you will need an additional adapter and 75 ohm extension to make your leads reach from the antenna to the VCR. This connection will work only if you have a strong, clear picture on the TV, indicating a strong signal. Connect the antenna to the adapter, and use the cable extension to go from the adapter to the VCR. Use the supplied 75 ohm cable to connect the VCR to the TV. Now continue with the hookup: 1. Using whichever adapter
ページ15に含まれる内容の要旨
If you already have a tape in the VCR, eject it. When the power is turned on, press POWER to turn it off. Press PLAYISTILL on the VCR to turn the power on again. Pressing the CHANNEL UP button on the VCR alternates between RFCH- 03 (channel 3) and RFCH-04 (channel 4) in the VCR's display. Display the channel which is not used by a commercial channel in your area. Your basic hookup is now complete. When you're ready to try hooking up a second VCR or a video camera for a complete home entertainmen
ページ16に含まれる内容の要旨
Study these pictures carefully to learn about the buttons and controls that you'll need for everyday operation. Various controls are explained throughout this manual as they are needed, but now is a good time to get familiar with their locations. Most of the time, you'll be directing the VCR from the remote control, but there are some controls on the VCR that will come in handy too. When you're familiar with these basic controls, proceed to Setup for First-Time Operation (page 21). We'll show yo
ページ17に含まれる内容の要旨
vtfx16a When the Remote Doesn't Work Right Check out these possibilities: Low Battery If the remote is not working even at close range, try putting in two fresh AA batteries. When replacing the batteries, remove the old batteries and press the POWER button on the remote and hold it for about 10 seconds, then insert two fresh batteries. Objects in the Way There may be objects between the remote and the VCR - for instance, a stack of books on the coffee table, your 2-year-old child, the dog. Hold
ページ18に含まれる内容の要旨
motion with one convenient dial. Display Indicators Watch for these signs and symbols that let you know that the VCR is responding to Meet Your On-Screen Guide Your Hitachi VCR has as a special feature called the Easy Guide System. This feature guides you through simple setup and programming tasks right on the TV screen. With the TV and VCR turned on, press GUIDE on the remote control. You will see this screen: You may view all the on-screen instructions in English, French, or Spanish. When you
ページ19に含まれる内容の要旨
2 VCR SETUP Press 2 to display the VCR SETUP screen and select the required sound from the VCR and its functions. (See page 26) 3 CLOCK Press 3 to display the CLOCK SET screen and correct the VCR's clock. (See page 21) 4 CHANNEL Press 4 to display the CHANNEL PRESET screen and preset channels or set the cable box. (See page 25) 7 ENGLISH Press 7 to display all option setting screens in English. 8 FRANCAIS Press 8 to display all option setting screens in French. 9ESPANOL Press 9 to display all op
ページ20に含まれる内容の要旨
Before you use your VCR to watch or record from your TV, you need to "tell" the VCR whether your TV uses cable or antenna input and let it program itself to receive your TV's channels. It's also a good idea to set the clock so you can do timed recording later. With your TV and VCR hooked up, turn them both on and follow these steps using the remote control. Setting the Clock This is easy to do and important for your later timed recordings. You'll need to set the clock when first hooking up your
