ページ1に含まれる内容の要旨
Gebrauchsanweisung, Libro de Instrucciones, Manuel d'utilisation
EFC 939 X
EFC 639 X
Istruzioni per l'uso,User Manual
UK
D F I
E
ページ2に含まれる内容の要旨
Contents Safety instructions .............................................................................................................. 41 Description of the appliance............................................................................................... 42 Mounting of grease filters .................................................................................................................................. 42 Function ............................................................
ページ3に含まれる内容の要旨
Congratulations to your new Cooker Hood Thank you for your choice of an Electrolux product. We are convinced that you will have great use and pleasure from your new cooker hood. Before you use the cooker hood we recommend that you read through the whole user manual giving a direct description of the cooker hood and its functions. To avoid the risks, that are always present when you use a product driven by electricity, it is important that the cooker hood is installed correctly and that you read
ページ4に含まれる内容の要旨
Description of the appliance 1. Control panel 2. Operating light 3. Grease filters EFC 639 Standard accessories included: 1 2 l Screws for mounting l Template for wall mounting l No return valve (mounted on air outlet) 3 Mounting of grease filters Attention! The grease filters are supplied not mounted and packed in order to avoid damages during transport of the hood. l Fit the pins of the filter on the slots of the grease filter housing, then use the handles of the filter to lock them. EFC 939 D
ページ5に含まれる内容の要旨
Special accessories Active carbon filter When the hood is used in recirculation mode an active carbon filter should be used. Order by the retailer: PNC 942 120 182 Installation Unpacking Check that the cooker hood has no damages. Transportation damages should immediately be reported to the one responsible for the transport Damages, faults and eventually missing details should immediately be reported to the seller. Take care of the packing material so that small children cannot play with it. Plac
ページ6に含まれる内容の要旨
Mounting of hood l Fit the drilling scheme onto the wall at the right height. (Fig. 4) The lower edge of the scheme correspond to the lower edge of the cooker hood. l On the drilling scheme is printed a line corre- sponding to the centre of the appliance; with a pencil draw a line up to the ceiling, this will aid installation procedures. (Fig. 4) l Drill as indicated on the scheme and fit two dowels, two hooks and two screws 5x45. (Fig. 4) Fig. 4 l Hang the hood, adjust the position using the sc
ページ7に含まれる内容の要旨
l Dismount the chimney support from the chim- ney unscrewing the two side screws (one per side of the chimney- conserve them). (Fig. 7) l Dismount the deflector "b" from the chimney support unscrewing the two screws that fix the deflector to the chimney support (conserve the screws). (Fig. 7) l Fit the chimney support onto the wall close to the ceiling. The support has a reference mark, this must match the line previously drawn on the wall. (Fig. 7) l Mark with a pencil the hole to be done and d
ページ8に含まれる内容の要旨
Using the hood The hood has one variable speed motor. For the Important to know best performance, we recommend using the low If the hood is run at the same time as a burner or speeds in normal conditions and the high speeds in fireplace that depend on ambient air (for example particular cases of strong odour and vapour con- gas, Diesel, coal or wood heaters, water heaters, centration. etc.) be careful, because the hood, when it exhausts the air, removes the ambient air required by the We recomme
ページ9に含まれる内容の要旨
Carbon filter saturation led Correct ventilation The LED marked C indicates carbon filter needs to To have the cooker hood working correctly the be replaced. windows in the kitchen should be closed. In stead This must be done after approximately 160 hours of a window in an adjacent room should be open. use. (Fig. 9) Read the instructions provided for replacing the carbon filter. To restore the LED for the filter warnings. After cleaning of the grease filter and exchange of the carbon filter, pre
ページ10に含まれる内容の要旨
300 490 If the hood does not function When you order service or spare parts you should Before you make contact to be ready to give the product number and model service denomination. This information you will find on Check that the power plug is connected to the wall the rating label. power outlet and that no fuse is blown. Do not do Take away the grease filter and you will find the any operations that can cause hazard or damage to rating label behind. the product. If the problem remains contact
ページ11に含まれる内容の要旨
ページ12に含まれる内容の要旨
ページ13に含まれる内容の要旨
ページ14に含まれる内容の要旨
LI1O3A Ed. 12/00
