ページ1に含まれる内容の要旨
3-861-721-31 (1)
FM/MW/LW
Cassette Car
Stereo
EN
Operating Instructions
PL
Instrukcje Obs³ugi
CZ
Návod k obsluze
GR
ÃäèçÝå÷ ¤åéôïùòçÝá÷
TU
KullanÝm kÝlavuzu
For installation and connections, see the supplied installation/connections
manual.
Szczegó³y dotycz±ce instalacji i pod³±czeñ, proszê sprawdziæ w dostarczonym,
osobnym podrêczniku
Informace o instalaci a zapojení naleznete v pøilo¾ené pøíruèce Instalace /
zapojení.
¡éá ôèî åçëáôÀóôáóè ëáé ôé÷ óùîäÛóåé÷, äåÝôå ôï óùîïäåùôéëÞ åçøåéòÝäéï
¶çëáô
ページ2に含まれる内容の要旨
Welcome! Thank you for purchasing the Sony Cassette Car Stereo. This unit lets you enjoy a variety of features by using a rotary commander. In addition to the tape playback and the radio operation you can expand your system by connecting optional CD/MD unit*. * You can connect to an CD changer, MD changer, or an CD player, MD player. EN 2
ページ3に含まれる内容の要旨
Table of contents This Unit Only With Optional Equipment Getting Started CD/MD Unit Resetting the unit ................................................ 4 Playing a CD/MD ............................................. 14 Detaching the front panel .................................. 4 Scanning the tracks Preparing the rotary commander ..................... 4 — Intro scan .................................................. 15 Setting the clock .................................................. 5 Playi
ページ4に含まれる内容の要旨
FILE MODE SEL DSPL MODE SEL Attaching the front panel Attach part A of the front panel to part B of the unit as illustrated and push until it clicks. Getting Started Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset A the unit. B Press the reset button with a pointed object, such as a ball-point pen. Notes • Make sure the front panel is right side up when attaching it to the unit as it cannot be attached upside down. • Do not press
ページ5に含まれる内容の要旨
Getting Started/Cassette Player Setting the clock Cassette Player The clock has a 24-hour digital indication. For example, setting it to 10:08 1 Press (OFF) or (DSPL) during operation. Listening to a tape 2 Press (DSPL) for two seconds. Insert a cassette.
100 The hour digit blinks. 1 Set the hour digits. to go forward Playback will start automatically. to go backward If a cassette is already inserted, press (SOURCE) repeatedly until “PLAY” is
displayed.
1000 FWD
2 Press (SEL) mome
ページ6に含まれる内容の要旨
Locating the beginning of a track Switching to the radio while fast- — Automatic Music Sensor (AMS) winding a tape You can skip up to nine tracks at one time. — Automatic Tuner Activation (ATA) Press (5) during playback. During playback, press either side of “ATA” appears on the display. (SEEK/AMS) momentarily. When fast-forwarding or rewinding with To locate the succeeding tracks SEEK (SEEK/AMS) for two seconds, the tuner will AMS turn on automatically. To locate the preceding tracks To cancel
ページ7に含まれる内容の要旨
Cassette Player/Radio Memorizing only the Radio desired stations Up to 6 stations on each band (FM1, FM2, FM3, MW and LW) can be stored on the preset number buttons in the order of your choice. Memorizing stations Therefore, 18 FM stations can be memorized. If you try to store another station on the same automatically preset number button, the most recent stored — Best Tuning Memory (BTM) station will be erased. This function selects from the currently received band the stations with the stronge
ページ8に含まれる内容の要旨
If FM stereo reception is poor — Monaural mode RDS Press (SENS/BTM) momentarily until “MONO” lights up on the display. The sound will improve, but it will become monaural. (The “ST” indication will disappear.) Overview of the RDS Changing the displayed items function Each time you press (DSPL), the display Radio Data System (RDS) is a broadcasting changes between the frequency and the clock. service that allows FM stations to send additional digital information along with the If you cannot tune
ページ9に含まれる内容の要旨
Radio/RDS Listening to a regional programme Re-tuning the same The “REG” (regional on) function of this unit lets you stay tuned to a regional programme programme automatically without being switched to another regional station. (Note that you must turn the AF — Alternative Frequencies (AF) function on.) The unit is factory preset to The Alternative Frequencies (AF) function “REG“ but if you want to turn off the function, automatically selects and re-tunes the station do the following. with the
ページ10に含まれる内容の要旨
Tip When the traffic announcement starts while you are Presetting the RDS listening to another programme source, the unit automatically switches to the announcement and goes back stations with AF and TA to the original source when the announcement is over. data Notes • “NO TP” flashes for five seconds if the received station When you preset the RDS stations, the unit doesn’t broadcast traffic announcements. Then, the unit stores each station’s data as well as its starts searching for a station t
ページ11に含まれる内容の要旨
RDS 1 Press (PTY) during FM reception until “PTY” lights up on the display. Locating a station by
programme type
INFO You can locate the station you want by The current programme type name appears selecting one of the programme types shown if the station is transmitting the PTY data. below. “--------” appears if the received station is Note not an RDS station or if the RDS data has If the countries or regions where EON data is not not been received. transmitted, you can use this function
ページ12に含まれる内容の要旨
Rotate the control momentarily and release it to: • Locate the beginnings of the tracks on the Other Functions tape. Rotate and hold the control, and release it to fast-wind the tape. To playback, rotate and hold the control again, and release it. • Locate a specific track on a disc. Rotate Using the rotary commander and hold the control until you locate the specific point in a track, then release it to The rotary commander works by pressing start playback. • Tune in the stations automatically.
ページ13に含まれる内容の要旨
Other Functions Changing the operative direction The operative direction of controls is factory Changing the sound and preset as in the illustration below. beep tone To increase Boosting the bass sound — D-bass You can enjoy clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost. To decrease You can hear the bass line more clearly even if If you need to mount the rotary commander the vocal volume remains the same. You
ページ14に含まれる内容の要旨
Attenuating the beep tone With Optional Equipment Press (6) while pressing (SEL). CD/MD Unit To obtain the beep tone again, press these buttons again. This unit can control a maximum of seven Note external CD/MD units in this configuretion: If you connect an optional power amplifier to the LINE CD unit - maximum of five OUT and do not use the built-in amplifier, the beep tone MD unit - maximum of five. will be disabled. Any combination up to seven will work. Changing the illumination color Press
ページ15に含まれる内容の要旨
Other Functions/CD/MD Unit Locating a specific point in a track To repeat all the discs in the — Manual Search current unit During playback, press and hold either Press (2) repeatedly during CD/MD side of (SEEK/AMS). Release the button playback until “REP 3” is displayed. when you have found the desired part. Each time you press (2) the display changes as To search forward follows: SEEK AMS REP 1 REP 2 To search backward (Track repeat) (Disc repeat) Switching to other discs Cancel (Normal REP 3*
ページ16に含まれる内容の要旨
3 To return to the normal CD playback mode, press (PTY/FILE) for two seconds. Labeling a CD (XR-C6100R only) — Disc Memo Tip (CD unit with custom file function) To erase/correct a name, enter “_” (under-bar) for each character. You can label each disc with a personalized name. You can enter up to 8 characters for a Displaying the disc memo disc. If you label a CD, you can locate a disc by name and select the specific tracks for Press (DSPL) during CD playback. playback. CD
1 Play the CD and p
ページ17に含まれる内容の要旨
CD/MD Unit/Additional Information 1 Start playing the disc and press (PTY/FILE) Additional for two seconds. Then press (PTY/FILE) momentarily. Information Bank edit mode DISC TRACK CD2
5 1 Note Precautions If you have not labeled the disc, you cannot use this function. For more information on “Labelling a CD”, • If your car was parked in direct sunlight refer to page 16. resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. 2 Press eithe
ページ18に含まれる内容の要旨
Notes on Cassettes Cassette care Maintenance • Do not touch the tape surface of a cassette, as any dirt or dust will contaminate the heads. Fuse Replacement • Keep cassettes away from equipment with When replacing the fuse, be sure to use one built-in magnets such as speakers and matching the amperage rating stated on the amplifiers, as erasure or distortion on the original fuse. If the fuse blows, check the recorded tape could occur. power connection and replace the fuse. If the • Do not expose
ページ19に含まれる内容の要旨
Additional Information Dismounting the unit 1 Release key (supplied) 2 3 4 EN 19
ページ20に含まれる内容の要旨
Location of controls INTRO REPEAT SHUF/ MODE 13 2 SOURCE OFF BANK/MTL ATA BL SKIP BTM DSPL SENS 46 5 FILE SEEK D-BASS SEL PTY AF/TA AMS 1 OFF 2 PRESET 3 DISC RELEASE ATT Refer to the pages for further details. 1 SEEK/AMS button 5, 6, 7, 8, 9, 11, 14, 15, (4) XR-C6100R: EN 17 BANK/MTL button 6, 17 XR-C5100R: 2 SOURCE button (TAPE/TUNER/CD/MD) 5, MTL button 6 7, 14, 16 (5) ATA (Automatic Tuner 3 (+)(Ð) (volume/bass/treble/left-right/ Activation) button 6 front-rear control) button 5, 13, 16 (6) BL
