ページ1に含まれる内容の要旨
• • ~. - -.,,: ••••• -' ~I'
VM8514
Operating Instructions
ページ2に含まれる内容の要旨
VM8514 ii
ページ3に含まれる内容の要旨
VM8514 CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to use all the features of your new Jensen VM8514 Mobile Multimedia Receiver for maximum enjoyment. Introduction ........................................................................................................................... 1 Front Panel Release ..........................
ページ4に含まれる内容の要旨
VM8514 INTRODUCTION Congratulations on your purchase of the Jensen VM8514 Mobile Multimedia Receiver. It's a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM8514 installed by a reputable installation shop. Features DVD • Aspect Ratio - Full and Normal • Fast Forward - 2X, 4X, 8X and 16X • Slow Motion - 1/2, 1/4, 1/6 and 1/8 • Play, Pause, Stop, Next Chapter and Previous Chapter CDIMP31WMA • CD-Text Compatible • ID3 Tag
ページ5に含まれる内容の要旨
VM8514 • Beep Tone Confirmation (On/Off Option) General • USB Interface - Supports Most Flash Memory Devices • SD Card Interface - Supports up to 8GB Cards • Bluetooth Ready (BTM1S Sold Separately) • 44-Key I nfrared Remote Control • One Composite Video Output for Additional Screens • 3.Smm Front Panel AudioNideo Input • Two-Band Tone control (Bass and Treble) w/ Four Preset EQ Curves • Front, Rear and Subwoofer Line Output • Programmable Volume Control • Rear Camera Input (Normal an
ページ6に含まれる内容の要旨
VM8514 FRONT PANEL RELEASE The front panel release button (4) releases the mechanism that holds the front panel to the chassis. Detaching the Front Panel To detach the front panel, perform the following steps: 1. Press the power button (1) to turn the unit off. 2. Press the front panel release button to flip the panel down. 3. Grasp the right side to release the front panel and then pull it at an angle to remove the left side from the chassis. 4. Store the front panel in the supplied c
ページ7に含まれる内容の要旨
VM8514 REIVIOTE CONTROL The remote control will allow you to control many functions of the VM8514. ~-----, ~ ---- -0 8C~ 8 22 13 VIDEO 10 c:~ ~ 26 -0 @) --0 SEEK+ 12 18 "- {9}-- 17 ~ e' CD 0 ~) ® -- --(8) ~ @- ® 29 ;:,) l~/~ 30 15 QENSEN"> '--------------~ J 4
ページ8に含まれる内容の要旨
VM8514 Operating Range The remote control sensor (19) is located near REMOTE SENSO~ the bottom of the front panel, left of the LCD screen. The remote control can operate within a distance of 3-Sm. Replacing the Battery When the range of operation of the remote control becomes short or stops functioning, 30° replace the battery with a new lithium battery. Be sure to observe the proper polarity. Table 1: Remote Control Functions AM/FM CO/SOI Blue- # Button XM Radio iPod OVONCD Tuner
ページ9に含まれる内容の要旨
VM8514 Table 1: Remote Control Functions AM/FM COISOI Blue- DVONCD Button XM Radio iPod # Tuner USB tooth Enter dIgIts Direct Press 1-6 Press1.:o DlrectTrack 8 Entry Entry to select to select Preset 1,2, Preset 1,2, 3,4,5,6. 3,4,5,6. Press and Press and hold to hold to save the save the current current channel as channel as the preset the preset channel. channel. Press 978 to enter or exit diag- nostic mode. View/mod- View/mod- View/mod- View/mod- View/mod- View/mod-
ページ10に含まれる内容の要旨
VM8514 Table 1: Remote Control Functions AM/FM CDISOI Blue- # Button XM Radio iPod OVDNCD Tuner USB tooth 10 KI-"I A- Repeat Kepeat B Section Section Stop/Return Stop/Return 17 Stop/ End calli Stop/Return Return reject incoming call/return to the main menu (Missed Calls/ Received Calls/ Dialed Calls/ Phone Book) Play/Pause Play/Pause Play/Pause 18 Play/ Play/Pause Pause Music 19 GOTO Enter chan- GOTO Spe- Answer GOTO Spe- nel number cific Area of incoming cific Area of d
ページ11に含まれる内容の要旨
VM8514 Table 1: Remote Control Functions AM/FM COISOI Blue- # Button XM Radio iPod OVDNCO Tuner USB tooth £;:S LJI~I-" Press and Press once Press and Press and Press and hold to set hold to set hold to set to enter hold to set clock channel clock clock clock search mode; press twice to enter cat- egory search mode; press three times to enter direct channel search mode Showalter- 24 ANGLE nate angles, if available BAND Select Select PAL, 25 Band NTSC, AUTO 26 PIN 27
ページ12に含まれる内容の要旨
VM8514 OPERATION Power Press the <.!> (power) button (1) to turn the unit on. Press and hold the power button again to turn the unit off. NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. In addition, the visibility of the numbers on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range. Source Press the SRC button (6) repeatedly to scan the various sources. A s
ページ13に含まれる内容の要旨
VM8514 Volume Control To increase the volume, turn the VOUSEUMENU (rotary encoder) (2) clockwise. To decrease the volume, turn the rotary encoder counter-clockwise. When volume is adjusted, the volume level is shown on the display panel as a number ranging from "0" (lowest) to "40" (highest). Steering Wheel Control (SWC) The VM8514 is compatible with the PAC (Pacific Accessory Corporation) steering wheel control adapter SWI-PS. A 3.5mm female connector (labeled "SWC Interface") on the b
ページ14に含まれる内容の要旨
VM8514 • BASS: Turn the VOL/SEUMENU rotary encoder (2) to adjust the bass level from "+7" to "-7". • TREBLE: Turn the VOL/SEL/MENU rotary encoder to adjust the treble level from "+7" to "-7". • BALANCE: Turn the VOL/SEL/MENU rotary encoder to adjust the balance from "R 16" (full right) to "L 16" (full left). • FADER: Turn the VOL/SEL/MENU rotary encoder to adjust the fader from "F16" (full front) to "R 16" (full rear). The unit automatically saves your changes and exits the audio contro
ページ15に含まれる内容の要旨
VM8514 Mirror Image This option allows for selection of a mirror image view when a rear view backup camera (sold separately) is connected to the CAMERA IN input on the back of the radio. Turn the rotary encoder to select "On" or "Off". Vol Mode Turn the rotary encoder to select "Last" or "Adjust". • Last: When the unit is turned on, the volume will resume at the level selected when last turned off. • Adjust: If choosing "Adjust", use the A-VOL setting to specify a turn-on volume. Turn
ページ16に含まれる内容の要旨
VM8514 Clock Set 1. Press and hold the DISP button (7) until the clock blinks. 2. Turn the VOUSEUMENU rotary encoder (2) to set the minutes. 3. Press the VOUSEUMENU button (2) to confirm and move to the hour field. 4. Turn the VOUSEUMENU rotary encoder to set the hour. 5. Press the DISP button to set the clock and exit the clock set function. Reset Button The RESET button is located behind the front panel and can only be accessed with the front panel opened. Resetting the unit will era
ページ17に含まれる内容の要旨
VM8514 RADIO OPERATION Accessing Radio Mode Press the SRC button (6) on the front panel or remote control (14) to switch to the RADIO source. c:)t I) .. -~---+_ .. ) 01 !2l ~~~~ FM-1 87.5 MHz) I I ~ si------ ------------~--~---------1 I ,--- ------ ----- ---~-----~-~-------~--------~----------~------\ i { I I i P1 87.5 MHz -----)-1 I I '----------- - -----------~ I I I I P2 90.1 MHz ~--~il I ,...,.. Ii lps!o sMALL----------_-~--~_--l 1. Stereo Reception Indicator 2. Radio Statio
ページ18に含まれる内容の要旨
VM8514 Select a Band Press the BAND button (3) on the front panel or remote control (25) to change between three FM and two AM bands. Each band stores up to six preset stations. Tuning Seek Tuning Press the TUNEITRACK »1 or 1« buttons (17) on the front panel or remote control (12) to seek the next/previous station automatically. Manual Tuning Press and hold the TUNEITRACK »1 or 1« buttons (17) on the front panel or remote control (12) to enter Manual tuning mode. Press the buttons aga
ページ19に含まれる内容の要旨
VM8514 Preview Scan Press the ~ button (16) to scan and play all strong stations for 5 seconds each. Press ~ again to stop scanning and play the current station. Automatic Store (AS) Press and hold the ~ button (16) to select six strong stations and store them in the current band using the Auto Store feature. After entering the stations into memory, the unit will automatically stop at each station for five seconds, allowing you to preview each selection. When using the Auto Store feature
ページ20に含まれる内容の要旨
VM8514 SATELLITE RADIO OPERATION Listeners can subscribe to XM® Radio on the Web by visiting www.xmradio.com. or by calling (800) 967-2346. Customers should have their Radio 10 ready (see "Displaying the Identification (10) Code'? Customers can receive a limited number of free-to-air channels without activation. Accessing Satellite Radio Mode Press the SRC button (6) on the front panel or remote control (14) to switch to the SAT source. 2 4 01:02 CH001 AM CHAN: XM Preview P1 XM Pr
