ページ1に含まれる内容の要旨
3-262-940-41 (2)
FM/AM
Cassette Car Stereo
GB
Operating Instructions
RU
Инструкция по эксплуатации
For installation and connections, see the supplied installation/connections manual.
Перед установкой и подсоединениями прочитайте прилагаемую
инструкцию по установке и подсоединению.
XR-F5100EE
© 2004 Sony Corporation
ページ2に含まれる内容の要旨
Welcome ! Thank you for purchasing this Sony Cassette Player. You can enjoy its various features even more with: • Optional CD/MD units (both changers and 1 players)* . CD TEXT information (displayed when a CD 2 TEXT disc* is played on a connected optional CD unit with the CD TEXT function). Supplied controller accessory Card remote commander RM-X115 Optional controller accessory Rotary commander RM-X4S *1 This unit works with Sony products only. *2 A CD TEXT disc is an audio CD that
ページ3に含まれる内容の要旨
Table of Contents Location of controls . . . . . . . . . . . . . . . . . . . 4 CD/MD Unit (optional) Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Playing a CD or MD . . . . . . . . . . . . . . . . . . 17 Notes on Cassettes. . . . . . . . . . . . . . . . . . . . . 6 Display items . . . . . . . . . . . . . . . . . . . . . . . 18 Playing tracks repeatedly Getting Started — Repeat Play . . . . . . . . . . . . . . . . . . . . 19 Resetting the unit. . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
T C E L E S M T L O S A I I D D L H E S U P T E S E R Location of controls Refer to the pages listed for details. OPEN DSO SEEK SEEK EQ3 MTL REP SHUF BL SKIP BBE ATA SENS BTM 1 2 3 4 5 6 OFF XR-F5100EE a DSO button 17 n RESET button (located on the front side of b SOURCE (Power on/Radio/Tape/CD/ the unit, behind the front panel) 7 MD) button o Number buttons 15 To select the source. Tape: c LIST button 11, 12, 20, 21 (3): REP 9 d Receptor for the card remote (5): BL SKIP 9 commander (6
ページ5に含まれる内容の要旨
T C E L E S M T L O S A I I D D L H E S U P T E SEEK SEEK S E R Card remote commander RM-X115 DSPL MODE DSO SEEK SEEK + EQ3 PRESET SOURCE SENS SEEK– SEEK+ PRESET – OFF ATT + VOL – (DISC/PRESET) (+): to select upwards (SEEK) (SEEK) (+): to select (–): to select leftwards/ rightwards/ The corresponding buttons of the card > . remote commander control the same functions as those on this unit. (DISC/PRESET) a DSPL button (–): to select downwards b SOURCE button c SEEK (–/+) buttons q DISC (ALBUM
ページ6に含まれる内容の要旨
Precautions Notes on Cassettes If your car was parked in direct sunlight, allow Cassette care the unit to cool off before operating it. Do not touch the tape surface of a cassette, as If no power is being supplied to the unit, check any dirt or dust will contaminate the heads. the connections first. If everything is in order, Keep cassettes away from equipment with check the fuse. built-in magnets such as speakers and If no sound comes from the speakers of a 2- amplifiers, as era
ページ7に含まれる内容の要旨
Detaching the front panel Getting Started You can detach the front panel of this unit to protect the unit from being stolen. Resetting the unit Caution alarm If you turn the ignition switch to the OFF Before operating the unit for the first time, or position without removing the front panel, the after replacing the car battery or changing the caution alarm will beep for a few seconds. connections, you must reset the unit. If you connect an optional amplifier and do not Remove the front pan
ページ8に含まれる内容の要旨
Attaching the front panel Place hole A of the front panel onto the spindle Setting the clock B on the unit, then lightly push the left side in. Press (SOURCE) on the unit (or insert a The clock uses a 24-hour digital indication. cassette) to operate the unit. Example: To set the clock to 10:08 1 Press (DSPL) for 2 seconds. The hour indication flashes. 1Rotate the volume control dial to set the hour. 2Press the select button. The minute indication flashes. 3Rotate the volume control dial to se
ページ9に含まれる内容の要旨
Note The AMS function may not work when: – the blanks between tracks are shorter than 4 Cassette Player seconds. – there is noise between tracks. – there are long sections of low volume or quiet sections. Listening to a tape 1 Press (OPEN) and insert a cassette. Playing a tape in various Playback starts automatically. functions You can play the tape in various functions: REP (Repeat Play) repeats the current track. BL SKIP (Blank Skip) skips blanks longer than 8 seconds. ATA (Automatic
ページ10に含まれる内容の要旨
Receiving the stored stations Radio 1 Press (SOURCE) repeatedly to select The unit can store up to 6 stations per band the radio. (FM1, FM2, FM3*, AM1 and AM2). 2 Press (MODE) repeatedly to select the Caution band. When tuning in stations while driving, use Best 3 Press the number button ((1) to (6)) Tuning Memory to prevent accidents. on which the desired station is stored. * FM3 tuning range is 65 to 74 MHz (at 30kHz step). If preset tuning does not work — Automatic tuning/Local Seek Mode
ページ11に含まれる内容の要旨
If FM stereo reception is poor — Monaural Mode Storing station names During radio reception, press (SENS) — Station Memo repeatedly until “MONO-ON” appears. You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name using up to 8 characters for a station. The sound improves, but becomes monaural (“ST” disappears). Storing the station names To return to normal radio reception mode, press 1 Tu
ページ12に含まれる内容の要旨
Erasing the station name Tuning in a station through 1 Press (SOURCE) repeatedly to select a list the radio. 2 Press (MODE) repeatedly to select the — List-up band. 1 During radio reception, press 3 Press (LIST) for 2 seconds. (LIST). 4 Press (DSPL) for 2 seconds. The frequency appears in the display. The stored names will appear. 5 Press the volume control dial to select the station name you want to erase. 6 Press the select button for 2 seconds. The name is erased. Repeat steps 5 and 6 if
ページ13に含まれる内容の要旨
DSPL MODE SEL By rotating the control Other Functions You can also control the unit (and optional CD/ MD units) with a rotary commander (optional). SEEK/AMS control Using the rotary commander First, attach the appropriate label depending on Rotate and release to: how you want to mount the rotary commander. – Locate the beginning of tracks on the tape. The rotary commander works by pressing – Tune in stations automatically. buttons and/or rotating controls. 1 – Skip tracks on the disc* . Rota
ページ14に含まれる内容の要旨
Changing the operative direction The operative direction of controls is factory-set Adjusting the sound as shown below. characteristics To increase You can adjust the balance, fader, low pass filter and subwoofer volume. 1 Press the select button repeatedly until “BAL,” “FAD,” “LPF” or “SUB” appears. To decrease Each time you press the select button, the If you need to mount the rotary commander on item changes as follows: the right hand side of the steering column, you 1 1 1 LOW* t MID*
ページ15に含まれる内容の要旨
1 Switching the REAR/SUB* Changing the sound and Press the select button and then rotate the volume control dial. display settings After 3 seconds, the display returns to normal The following items can be set: play mode. 1 REAR/SUB* — to switch the audio output REAR or SUB. Selecting the desired item – Select “REAR” to output to a power amplifier. – Select “SUB” to output to a subwoofer. Press the select button and the 2 A.SCRL (Auto Scroll)* (page 18). desired button simultaneously.
ページ16に含まれる内容の要旨
Adjusting the equalizer curve You can store and adjust the equalizer settings Setting the equalizer (EQ3) for different tone ranges. You can select an equalizer curve for 7 music 1 Press (SOURCE) to select a source types (XPLOD, VOCAL, CLUB, JAZZ, NEW (Radio, Tape, CD or MD). AGE, ROCK, CUSTOM and OFF (equalizer OFF)). 2 Press (EQ3) repeatedly to select the You can store a different equalizer setting for desired equalizer curve. each source. 3 Adjusting the equalizer curve. Selecting the
ページ17に含まれる内容の要旨
Setting the Dynamic CD/MD Unit (optional) Soundstage Organizer (DSO) This unit can control external CD/MD units (optional). If your speakers are installed into the lower part If you connect an optional CD unit with the CD of the doors, the sound will come from below TEXT function and the CUSTOM FILE and may not be clear. function, the CD TEXT information will appear The DSO (Dynamic Soundstage Organizer) in the display when you play a CD TEXT disc. function creates a more ambient sound a
ページ18に含まれる内容の要旨
Cautions when connecting MGS-X1 and MD unit(s) This unit recognizes MGS-X1 as an MD unit. Display items When you want to play MGS-X1, press (SOURCE) to select “MS” or “MD.” When “MS” appears in the source display, MGS-X1 starts to play. When “MD” When the disc/album/track changes, any 1 appears in the source display, press (MODE) to prerecorded title* of the new disc/album/track is select “MS,” to start playback. automatically displayed. (If the A.SCRL (Auto When you want to play an M
ページ19に含まれる内容の要旨
Playing tracks repeatedly Playing tracks in random — Repeat Play order You can select: — Shuffle Play REP-TRACK — to repeat the current track. 1 You can select: REP-ALBM* — to repeat the tracks in the 1 SHUF-ALBM* — to play the tracks in the current album. 2 current album in random order. REP-DISC* — to repeat the tracks in the SHUF-DISC — to play the tracks in the current current disc. disc in random order. 2 *1 Available only when an optional CD unit with the SHUF-CHGR* — to
ページ20に含まれる内容の要旨
Viewing the Disc Memo As a display item, the Disc Memo always takes Labelling a CD priority over any original CD TEXT information. — Disc Memo (When connecting a CD unit with the CUSTOM FILE function) To Press You can label each disc with a custom name View (DSPL) during CD/CD (Disc Memo). You can enter up to 8 characters TEXT disc playback for a disc. If you label a CD, you can locate the disc by name (page 21). Tip Other items can be displayed (page 18). 1 Start playing the disc you want
