ページ1に含まれる内容の要旨
R
EN
TDM-9505RB
TDM-9503R
TDM-9501RM
DE
TDM-9501R
FM/MW/LW/RDS Cassette Receiver
FR
• OWNER'S MANUAL
Please read before using this equipment.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
• MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
ES
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• ISTRUZIONI PER L'USO
Si prega di leggere prima di utilizzare il
attrezzatura.
• ANVÄNDARHANDLEDNING
IT
Innan du använder utrustningen bör du l
ページ2に含まれる内容の要旨
R EN TDM-9505RB TDM-9503R TDM-9501RM DE TDM-9501R FM/MW/LW/RDS Cassette Receiver FR • OWNER'S MANUAL Please read before using this equipment. • BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. • MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. ES • MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. • ISTRUZIONI PER L'USO Si prega di leggere prima di utilizzare il attrezzatura. • ANVÄNDARHANDLEDNING IT Innan du använder utrustningen bör du l
ページ3に含まれる内容の要旨
CHM-S630 • CD changer for TDM-9505RB/ TDM-9503R/TDM-9501RM/TDM-9501R CHA-S634 CHA-1214 • CD-Wechsler für TDM-9505RB/ TDM-9503R/TDM-9501RM/TDM-9501R • Changeur CD pour TDM-9505RB/ TDM-9503R/TDM-9501RM/TDM-9501R • Cambiador de CD para TDM-9505RB/TDM- 9503R/TDM-9501RM/TDM-9501R • Cambia CD per TDM-9505RB/ TDM-9503R/TDM-9501RM/TDM-9501R • CD-växlare för TDM-9505RB/ TDM-9503R/TDM-9501RM/TDM-9501R Alpine CD Changers Give You More! More musical selections, more versatility, more convenience. The CHA-S6
ページ4に含まれる内容の要旨
ENGLISH Contents Cassette Player Operation Operating Instructions Inserting/Ejecting Cassette ..............................11 Normal Play and Pause ....................................11 WARNING Dolby B NR (Noise Reduction) EN (TDM-9505RB/TDM-9503R only) .............. 11 WARNING .................................................. 2 Repeat Play ...................................................... 11 CAUTION ................................................... 2 Blank Skip (B.SKIP)..............
ページ5に含まれる内容の要旨
WARNING WARNING CAUTION The exclamation point within an equilateral The exclamation point within an equilateral triangle and "WARNING" are intended to alert the triangle and "CAUTION" are intended to alert the user to the presence of important operating user to the presence of important operating instructions. instructions. Failure to heed the instructions will result in Failure to heed the instructions can result in injury severe injury or death. or material damage. DO NOT DISASSEMBLE OR ALTER.
ページ6に含まれる内容の要旨
Precision Tape Mechanism Prevent any foreign objects from entering the cassette opening as the precision mechanism and tape head may be damaged. Never play dirty or dusty tapes – they can damage the tape head. EN Tape Head Cleaning Periodic cleaning (approximately every 20 hours of use) of the tape head with a wet type head-cleaning cassette tape (available at audio stores) is necessary for best performance. Fuse Replacement When replacing the fuse(s), the replacement must be of the same amperag
ページ7に含まれる内容の要旨
Basic Operation c POWER/SETUP MODE/LOUD 1 Detaching the Front Panel • Connectable to Remote Control Interface Box 1 Press the POWER button to turn off the power. You can operate this unit from the vehicle's control unit when an Alpine Remote Control 2 Press the (Release) button until the front Interface Box (optional) is connected. For panel pops out. details, contact your Alpine dealer. 3 Grasp the left side of the front panel and pull it out. Initial System Start-Up Immediately after installi
ページ8に含まれる内容の要旨
Turning Power On and Off Adjusting Volume/Bass/Treble/ Balance (Between Left and Right 1 Press the POWER button to turn on the unit. Channels)/Fader (Between Front NOTE The unit can be turned on by pressing any other button and Rear Speakers) except the eject c button. 1 Press the MODE button repeatedly to choose EN The volume level gradually increases to the the desired mode. previous level you were listening to before the Each press changes the modes as follows: unit was turned off. Press the
ページ9に含まれる内容の要旨
Radio Operation BAND SOURCE g f TUNE / A.ME Preset buttons (1 through 6) 3 Press the TUNE button to illuminate the "DX" Manual Tuning and "SEEK" indicators in the display. With the DX mode activated, both strong and 1 Press the SOURCE button until radio frequency weak stations will be tuned in the Auto-Seek appears in the display. operation. Press again to return to the local mode. The "DX" 2 Press the BAND button repeatedly until the indicator will turn off and the "SEEK" indicator desired ra
ページ10に含まれる内容の要旨
3 Repeat the procedure to store up to 5 other Tuning to Preset Stations stations onto the same band. To use this procedure for other bands, simply 1 Press the SOURCE button until the frequency select the band desired and repeat the appears in the display. procedure. 2 Press the BAND button repeatedly until the A total of 24 stations can be stored in the preset desired band is displayed. memory (6 stations for each band; FM1, FM2, Each press changes the radio bands as follows: MW and LW). → F1 →
ページ11に含まれる内容の要旨
RDS Operation AF T.INFO F 3 POWER/SETUP f Preset buttons g PTY (1 through 6) Setting RDS Reception Mode and Recalling Preset RDS Stations Receiving RDS Stations 1 Press the AF button to activate the RDS mode. The display shows "AF" when the RDS mode is activated. The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of 2 Make sure that the function indicator at the top regular FM broadcast. The RDS allows you to side of the "F" button illuminates,
ページ12に含まれる内容の要旨
NOTE Turning Emergency Alarm On or Off If no button is pressed within 5 seconds after pressing the PTY button, the PTY mode will be automatically cancelled. 1 Press and hold the SETUP button for at least 3 3 Press the g and f buttons within 5 seconds. seconds after activating the PTY mode to 2 Press the Preset 3 button repeatedly to select choose the desired programme type while the the PTY31 ON or PTY31 OFF mode. PTY (programme type) is being displayed. Each In the PTY31 ON mode, the unit will
ページ13に含まれる内容の要旨
RDS Operation F SETUP 2 NEWS Priority News Receiving RDS Regional (Local) Stations This function allows you to preset to give priority to the News programme. You will never miss the 1 Press and hold the SETUP button for at least 3 News programme as the unit automatically gives seconds to activate the setting mode. priority to the News programme whenever it begins broadcasting, and interrupts the 2 Press the preset 2 button to turn on or off the programme you are currently listening. This REG (Re
ページ14に含まれる内容の要旨
Cassette Player Operation c B NR -/J B.SKIP (REPEAT) Inserting/Ejecting Cassette 2 Press the :/J button to pause the tape playback. The display shows "PAUSE." 1 Insert a cassette tape into the slot with the open Press again to resume the tape playback. side facing right. 3 Press the Eject (c) button to stop the tape play and eject the cassette. The tape-direction indicator disappears. Dolby B NR (Noise Reduction) When the cassette is loaded, the player (TDM-9505RB/TDM-9503R only) automatically s
ページ15に含まれる内容の要旨
Cassette Player Operation P.S.UP P.S.DN PROG (SCAN) g f Fast Forward and Rewind Programme Sensor (P.S.) 1 Press the P.S. DN button once during tape play 1 Press the g or f button during tape play to to return to the beginning of the current selection fast rewind or forward the tape respectively. being played. The tape side indicator ( or ) blinks and >> If you wish to return to a selection further back, or << moves indicating the direction of the tape. press repeatedly until the number of sele
ページ16に含まれる内容の要旨
CD Changer Operation SOURCE g f -/J Preset buttons Controlling CD Changer (Optional) Music Sensor (M.S.) Skip 1 Press the g button once to return to the If an optional Alpine 6-disc CD Changer (M-Bus) beginning of the current track. is connected to the 8-pin DIN connector of the If you wish to return to the beginning of a track TDM-9505RB/TDM-9503R/TDM-9501RM/TDM- further back, repeatedly press until you reach the 9501R you can control the CD Changer using the desired track. TDM-9505RB/TDM-950
ページ17に含まれる内容の要旨
CD Changer Operation SOURCE TITLE F Preset buttons (REPEAT) g f (M.I.X.) (SCAN) Repeat Play on Single Track or M.I.X. (Random) Play Entire Disc 1 Press "F" button. The function indicator at the top side of the "F" 1 Press the "F" (Function) button. button will turn off. The function indicator at the top side of the "F" 2 Press the (M.I.X.) button while the CD is button will turn off. playing or in the Pause mode. The M.I.X. indicator will appear in the display. 2 Press the (REPEAT) button to
ページ18に含まれる内容の要旨
To Display CD Titles 6 Repeat the steps 4 and 5 above to complete the titling. Entering the eighth character, (TDM-9505RB/TDM-9503R only) automatically stores the title into memory. When entering a title of less than 8 characters Titles can be displayed for the CDs with titles (for example, 3 character title): entered. After entering 3 characters to complete your title, (Refer to page 15 to title discs.) the 4th character space will be blinking. Go to step 7 to complete the title. 1 Press the TI
ページ19に含まれる内容の要旨
Remote Control Operation 1 Remote control sensor 2 5 6 7 8 9 p 3 q 4 w g DN Button 8 Controls on Remote Control Radio mode: SEEK (DN) Button (TDM-9505RB/TDM-9503R only) CD changer mode: Press the button to go back to the beginning of the current track. Power Button 1 Tape mode: Press the button during tape play to Press the button to turn the power on/off. fast rewind the tape respectively. Source Button 2 f UP Button 9 Press to select the audio source. Radio mode: SEEK (UP) Button 3 CD changer
ページ20に含まれる内容の要旨
Battery Replacement Applicable battery: Use two “AAA” sized dry batteries or equivalent. 1 Opening the battery cover Slide out the battery cover while firmly pressing the direction of arrow. 2 Replacing the battery Put the batteries in the case observing the polarities as illustrated. 3 Closing the cover Push the cover as illustrated until a click is heard. 17-EN 5/13-17 (EN) TDM-9505RB 17 02.7.15, 10:14 AM ALPINE TDM-9501RM 68P01434K82-O
