Ultimate Support Systems TS-100Bの取扱説明書

ページ1に含まれる内容の要旨

special instructions please note
1. Occasionally clean the stand with a damp Air-powered height adjustment
cloth or non-abrasive cleaner. mechanism under pressure. Do not
disassemble or puncture assembly.
2. When loading the stand, ONLY add the
Air shipping not recommended.
speaker when the stand is in a fully upright
position (all legs on the floor).
3. Do not drag the stand while it is loaded; this
could break the fittings and result in damage
to the stand which will not be covere

ページ2に含まれる内容の要旨

set-up STEP 1 1 Loosen leg fitting hand knob. STEP 2 2 Turn stand upside down and pivot legs so Ultimate Support label faces you. STEP 3 3 Turn stand upright and slide leg fitting to adjust diameter of leg spread. Leg braces should be parallel to floor for maximum stability. Tighten hand knob. STEP 4 4 The built-in adapter fits both 1-1/2” or 1-3/8” internal diameter speaker sockets. Use the lower position for 1-1/2”. For 1-3/8” sockets, depress push buttons and raise adapter until it loc