ページ1に含まれる内容の要旨
Digital Blood Pressure Monitor
Model UA-767 BT-Ci
Instruction Manual
Original
Manuel d ’ instructions
Traduction
Manual de Instrucciones
Traducción
Manuale di Istruzioni
Traduzione
Bedienungsanleitung
Übersetzung
1WMPD4002749
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Contents Dear Customers .......................................................................2 Preliminary Remarks.................................................................2 Precautions ..............................................................................2 Parts Identification ...................................................................4 Symbols ...................................................................................5 Using the Monitor.................
ページ4に含まれる内容の要旨
Dear Customers Congratulations on purchasing a state-of-the-art A&D blood pressure monitor, one of the most advanced monitors available today. Designed for ease of use and accuracy, this monitor will facilitate your daily blood pressure regimen. We recommend that you read through this manual carefully before using the device for the first time. Preliminary Remarks This device conforms to the European Directive 93/42 EEC for Medical Products. This is made evident by the mark o
ページ5に含まれる内容の要旨
Measurements may be distorted if the device is used close to televisions, microwave ovens, cellular telephones, X-ray or other devices with strong electrical fields. Used equipment, parts and batteries are not treated as ordinary household waste, and must be disposed of according to the applicable local regulations. When the AC adapter is used, make sure that the AC adapter can be readily removed from the electrical outlet when necessary. When reusing the device, confirm that the
ページ6に含まれる内容の要旨
Parts Identification DC Jack START Button Display Air Connector Plug Air Socket Air Hose Proper Fit Range Artery Position Mark Index Mark Battery Cover Arm Cuff Battery Compartment 1.5V Batteries (LR6, R6P or AA) MEMORY Systolic Pressure Part of Display Diastolic Pressure Pressure Bar Indicator Pulse Rate Battery Indicator Heart Mark I.H.B. Indicator (Irregular heartbeat indicator) English 4
ページ7に含まれる内容の要旨
Symbols Symbols Function / Meaning Recommended Action Standby and power on. Battery installation guide Direct current Type BF: Device, cuff and tubing are designed to provide special protection against electrical shocks. The indicator that appears while Measurement is in measurement is in progress. It blinks progress. Remain as still as when the pulse is detected. possible. Irregular Heartbeat indicator. (I.H.B.) The indicator that appears when an irregular heart
ページ8に含まれる内容の要旨
Symbols Function / Meaning Recommended Action Date of manufacture Class II device WEEE label Refer to instruction manual/booklet Serial number SN Polarity of DC jack Using the Monitor Step 1 Installing / Changing the Batteries Step 3 1. Slide the battery cover up to open it. 2. Remove the used batteries and insert new batteries into the battery compartment as shown, taking care that the polarities (+) and (-) are correct. Step 2 3. Slide the batter
ページ9に含まれる内容の要旨
Using the Monitor Wireless Function CAUTION In the unlikely event that this monitor causes radio wave interference in a different wireless station, change the location where this monitor is used or stop use immediately. Be sure to use in a location where visibility between the two devices that you want to connect is good. The connection distance is reduced by the structure of buildings or other obstructions. In particular, connection may be impossible when devices are used on either
ページ10に含まれる内容の要旨
Using the Monitor Pairing / Unpairing A Bluetooth device needs to be paired with a different specific device in order to communicate with that device. If this monitor is paired with a receiver device from the start, measurement data is transmitted automatically to the receiver device each time a measurement is made. Unpairing needs to be performed to cancel pairing. Cautions for pairing Be sure to turn the power of all other Bluetooth devices off when pairing. Multiple devices ca
ページ11に含まれる内容の要旨
Using the Monitor Unpairing procedure 1. Press and hold the START button until “upr” is displayed. 2. Press the START button again. Unpairing will be performed. 3. The monitor displays “end” ” to indicate that unpairing is complete. When two receiver devices are paired, both devices are unpaired. 4. If “err10” or “err11” is displayed or unpairing is failed, try steps 1-3 again. Communication distance The communication distance between this monitor and the receive
ページ12に含まれる内容の要旨
Using the Monitor Selecting the Correct Cuff Size Using the correct cuff size is important for an accurate reading. If the cuff is not the proper size, the reading may yield an incorrect blood pressure value. The arm size is printed on each cuff. The index and proper fit range, on the cuff, tell you if you are applying the correct cuff. (Refer to "Symbols that are printed on the cuff".) If the index points outside of the range, contact your local dealer to purchase a replacement
ページ13に含まれる内容の要旨
Using the Monitor Applying the Arm Cuff Do not roll up shirtsleeve tightly 1. Wrap the cuff around the upper arm, Cuff about 1-2 cm above the inside of 1 to 2 cm the elbow, as shown. Place the cuff directly against the skin, as clothing may cause a faint pulse, and result in a measurement error. Artery position mark 2. Constriction of the upper arm, Secure the fabric caused by tightly rolling up a fastener firmly shirtsleeve, may prevent accurate readings. Air hose 3. C
ページ14に含まれる内容の要旨
Measurements Model UA-767 BT-Ci is designed to detect the pulse and to inflate the cuff to a systolic pressure level automatically. If your systolic pressure is expected to exceed 230 mmHg or you use the optional small cuff, read "Measurement with the desired systolic pressure" on the next page. Normal Measurement 1. Place the cuff on the arm (preferably the left arm). At heart level Sit quietly during measurement. 2. Press the START button. START button The last data
ページ15に含まれる内容の要旨
Measurements Measurement with the Desired Systolic Pressure If your systolic pressure is expected to exceed 230 mmHg or you use the optional small cuff, use this procedure. 1. Place the cuff on the arm (preferably the left arm). At heart level 2. Press and hold the START button until a number about 30 to 40 mmHg Press and hold the button higher than your expected systolic Release the button pressure appears. at the desired 3. Release the START button to start systolic
ページ16に含まれる内容の要旨
What is an Irregular Heartbeat Model UA-767 BT-Ci blood pressure monitor provides a blood pressure and pulse rate measurement even when an irregular heartbeat occurs. An irregular heartbeat is defined as a heartbeat that varies by 25% from the average of all heartbeats during the blood pressure measurement. It is important that you be relaxed, remain still and do not talk during measurements. Note: We recommend contacting your physician if you see this indicator frequently.
ページ17に含まれる内容の要旨
About Blood Pressure What is Blood Pressure? Blood pressure is the force exerted by blood against the walls of the arteries. Systolic pressure occurs when the heart contracts. Diastolic pressure occurs when the heart expands. Blood pressure is measured in millimeters of mercury (mmHg). One's natural blood pressure is represented by the fundamental pressure, which is measured first thing in the morning while one is still at rest and before eating. What is Hypertension and How is
ページ18に含まれる内容の要旨
Typical fluctuation within a day described in this manual to get to know your (Measured every five minutes) normal blood pressure. Regular readings give Systolic a more comprehensive blood pressure history. Be sure to note date and time when recording your blood pressure. Consult your doctor to interpret your blood pressure data. Sleep Diastolic PM AM Time Troubleshooting Problem Possible Reason Recommended Action Nothing appears Batteries are drained. Replace all batteries with
ページ19に含まれる内容の要旨
Maintenance Do not open the device. It uses delicate electrical components and an intricate air unit that could be damaged. If you cannot fix the problem using the troubleshooting instructions, request service from your dealer or from the A&D service group. The A&D service group will provide technical information, spare parts and units to authorized dealers. The device was designed and manufactured for a long service life. However it is generally recommended to have the device inspe
ページ20に含まれる内容の要旨
Useful life Device: 5 years (when used six times a day) Cuff: 2 years (when used six times a day) Accessory AC adapter The adapter is to connect the blood pressure monitor to a power source at home. TB-233 Please contact your local A&D dealer for purchasing. The AC adapter is required to be inspected or replaced periodically. TB-233C Input: 100-240V Output: 6V 500mA 139°C 2A TB-233BF Input: 100-240V Output: 6V 500mA 139°C 2A Accessories sold separately Cuf
